Immersive Storytelling Safety Training to Enhance Trainee Engagement: Pilot Study for Fall Hazards in the Residential Construction Sector
Publication: Construction Research Congress 2024
ABSTRACT
Fall accidents remain the leading cause of fatalities in the United States. Training programs are often used to mitigate fall accidents, but they lack effectiveness in terms of engagement experienced by trainees. This pilot study developed an immersive storytelling safety training approach to increase trainee engagement during safety training focusing on residential industry fall hazards. A between-subject experimental design was used to comparatively evaluate trainee engagement across two conditions: (1) immersive storytelling, and (2) immersive non-storytelling. Trainee behavioral, cognitive, and emotional engagement was measured using eye-tracking data and surveys. Twenty students from construction-related programs participated in this pilot study. While the results suggest some portions of the training that can benefit from the use of the storytelling technique, no significant statistical differences were observed across behavioral, cognitive, or emotional engagement. This study highlights how immersive storytelling safety training can be used as an alternative method for fall hazard safety training.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Bliss, M. M., and Dalto, J. (2018). “Storytelling in safety training.” Prof. Saf. 63 (10), 34–35.
Brown, S., Harris, W., Brooks, R., and Dong, X. S. (2021). “Fatal Injury Trends in the Construction Industry.” Data Bulleting, February 2021, CPWR. <https://www.cpwr.com/wp-content/uploads/DataBulletin-February-2021.pdf>(May 11th, 2023).
Chen, G., Gully, S. M., and Eden, D. (2001). “Validation of a new general self-efficacy scale.” Organizational research methods, 4(1), 62–83.
Cherrett, T., Wills, G., Price, J., Maynard, S., and Dror, I. E. (2009). “Making training more cognitively effective: making videos interactive.” Brit. J. Educat. Technol. 40 (6), 1124–1134.
Conchie, S. M. (2013). “Transformational leadership, intrinsic motivation, and trust: A moderated-mediated model of workplace safety.” Journal of Occ. Health & Psychology, 18(2), 198.
Demirkesen, S., and Arditi, D. (2015). “Construction Safety Personnel’s Perceptions of Safety Training Practices.” Int. J. Project Manage., 33(5), 1160–1169.
Douglas-Lenders, R. C., Holland, P. J., and Allen, B. (2017). “Building a better workforce: A case study in management simulations and experiential learning in the construction industry.” Education+ Training, 59(1), 2–14.
Eiris, R., and Gheisari, M. (2017). “Research trends of virtual human applications in architecture, engineering and construction.” Journal of ITCon, 22(9), 168–184.
Eiris, R., and Gheisari, M. (2023). “Applying 360-Degree Virtual Reality for Construction Safety Training.” Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era.
Eiris, R., Gheisari, M., and Esmaeili, B. (2020a). “Desktop-based safety training using 360-degree panorama and static virtual reality techniques: A comparative experimental study.” Automation in Construction, 109, 102969.
Eiris, R., Jain, A., Gheisari, M., and Wehle, A. (2020b). “Safety immersive storytelling using narrated 360-degree panoramas: A fall hazard training within the electrical trade context.” Safety science, 127, 104703.
Eiris, R., Wen, J., and Gheisari, M. (2020c). “iVisit: Digital interactive construction site visits using 360-degree panoramas and virtual humans.” In Construction Research Congress 2020 (pp. 1106–1116). Reston, VA: American Society of Civil Engineers.
Eiris, R., Wen, J., and Gheisari, M. (2021). “Influence of Virtual Human Appearance Fidelity within Building Science Storytelling Educational Applications.” Arch. Eng., 27(4), 0402.
Guay, F., Vallerand, R. J., and Blanchard, C. (2000). “On the assessment of situational intrinsic and extrinsic motivation: The Situational Motivation Scale.” Motivation and emotion, 24(3).
Halverson, L. R., and Graham, C. R. (2019). “Learner engagement in blended learning environments: A conceptual framework.” Online Learning, 23(2), 145–178.
Henrie, C. R., Halverson, L. R., and Graham, C. R. (2015). “Measuring student engagement in technology-mediated learning: A review.” Computers & Education, 90, 36–53.
Hu, K., Rahmandad, H., Smith, T., and Winchester, W. (2011). “Factors influencing the risk of falls in the construction industry: A review of the evidence.” Constr. Manage. Econ., 29(4).
Hung, Y. H., Winchester, W. W., III, Smith-Jackson, T. L., Kleiner, B. M., Babski-Reeves, K. L., and Mills, T. H., III. (2013). “Identifying fall-protection training needs for residential roofing subcontractors.” Applied ergonomics, 44(3), 372–380.
Kang, Y. (2018). “Use of fall protection in the US construction industry.” Journal of Management in Engineering, 34(6), 04018045.
Kang, Y., Siddiqui, S., Suk, S. J., Chi, S., and Kim, C. (2017). “Trends of fall accidents in the US construction industry.” Journal of Cons. Engineering and Management, 143(8), 04017043.
Kaskutas, V., Dale, A. M., Lipscomb, H., and Evanoff, B. (2013). “Fall prevention and safety communication training for foremen: Report of a pilot project designed to improve residential construction safety.” Journal of safety research, 44, 111–118.
Le, Q. T., Pedro, A. K. E. E. M., Lim, C. R., Park, H. T., Park, C. S., and Kim, H. K. (2015a). “A framework for using mobile based virtual reality and augmented reality for experiential construction safety education.” International Journal of Eng. Education, 31(3), 713–725.
Le, Q. T., Pedro, A., and Park, C. S. (2015b). “A social virtual reality-based construction safety education system for experiential learning.” Journal of Intel. & Robotic Sys., 79, 487–506.
Lee, K., Hasanzadeh, S., and Esmaeili, B. (2022). “Assessing Hazard Anticipation in Dynamic Construction Environments Using Multimodal 360-Degree Panorama Videos.” Journal of Management in Engineering, 38(5), 04022039.
Lester, D. (2013). “A review of the student engagement literature.” Focus on colleges, universities & schools, 7(1).
Li, X., Yi, W., Chi, H. L., Wang, X., and Chan, A. P. (2018). “A critical review of virtual and augmented reality (VR/AR) applications in construction safety.” Automation in Construction, 86, 150–162.
McDowell, K. (2021). “Storytelling wisdom: Story, information, and DIKW.” Journal of the Association for Information Science and Technology, 72(10), 1223–1233.
Moore, H. F., Eiris, R., Gheisari, M., and Esmaeili, B. (2019). “Hazard identification training using 360-degree panorama vs. virtual reality techniques: A pilot study.” In ASCE International Conference on Computing in Civil Engineering 2019 (pp. 55–62). Reston, VA: ASCE.
OSHA (Occupational Safety and Health Administration). (2020). “Commonly Used Statistics.” <https://www.osha.gov/data/commonstats>(May 11th, 2023).
Pham, H. C., Dao, N., Pedro, A., Le, Q. T., Hussain, R., Cho, S., and Park, C. S. I. K. (2018). “Virtual field trip for mobile construction safety education using 360-degree panoramic virtual reality.” International Journal of Engineering Education, 34(4), 1174–1191.
Rokooei, S., Shojaei, A., Alvanchi, A., Azad, R., and Didehvar, N. (2023). “Virtual reality application for construction safety training.” Safety science, 157, 105925.
Song, K., Lee, G., Han, S., and Lee, S. (2022). “Evaluation of Construction Workers’ Emotional States during VR Safety Training.” In Construction Research Congress 2022 (pp. 660–669).
Sun, M., Zhu, F., and Sun, X. (2020). “Influencing factors of construction professionals’ burnout in China: a sequential mixed-method.” Eng., Const., and Arch Mgmt., 27(10), 3215–3233.
Yu, W. D., Wang, K. C., and Wu, H. T. (2022). “Empirical Comparison of Learning Effectiveness of Immersive Virtual Reality–Based Safety Training for Novice and Experienced Construction Workers.” Journal of Cons. Engineering and Management, 148(9), 04022078.
Zhang, M., Shu, L., Luo, X., Yuan, M., and Zheng, X. (2022). “Virtual reality technology in construction safety training: Extended technology acceptance model.” Automation in Construction, 135, 104113.
Zuluaga, C. M., Namian, M., and Albert, A. (2016). “Impact of training methods on hazard recognition and risk perception in construction.” CRC 2016, San Juan, PR (pp. 2861–2871).
Information & Authors
Information
Published In
History
Published online: Mar 18, 2024
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.