State-of-the-Art Review on Road Harmless Utilization Technology of Solid Waste: Coal Gangues and Waste Plastics
Publication: International Conference on Road and Airfield Pavement Technology 2023
ABSTRACT
The “Guiding Opinions on the Comprehensive Utilization of Bulk Solid Waste during the 14th Five-Year Plan” issued by the Ministry of Ecology and Environment in 2021 points out that by 2021, the accumulated stockpile of bulk solid waste in China will be about 60 billion tonnes, while there are problems of low solid waste utilization, occupying large amounts of land resources and potential ecological and environmental hazards. In order to further improve the utilization rate of solid waste, reduce the cost of road construction and reduce the damage and impact of solid waste accumulation on the environment. In this paper, author analyze the influence of the admixture of coal gangue and waste plastics on the performance of asphalt permeability, softening point and ductility, as well as on the high-temperature stability, low-temperature crack resistance and water stability of asphalt mixtures, summarizing and evaluating the microscopic modification mechanism and other aspects.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ahmadi, E., Fauzi, A., Hussin, H., Baharun, N., Ariffin, K.S. & Rezan, S.A. 2017, “Synthesis of titanium oxycarbonitride by carbothermal reduction and nitridation of ilmenite with recycling of polyethylene terephthalate (PET)”, International journal of minerals, metallurgy and materials, vol. 24, no. 4, pp. 444-454.
Amir, M. & Morteza, R. 2014, “Application of coal waste powder as filler in hot mix asphalt [J]”, Construction and Building Materials, 66:476-483
Amir, M., Mortezha, R. & Pooyan, A. 2014, “Effect of coal waste powder in hot mix asphalt compared to conventional fillers: Mix mechanical properties and environmental impacts [J]”, Journal of Cleaner Production, 11(78): 1-7.
Baghaee Moghaddam, T., Soltani, M. & Karim, M.R. 2014, “Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test”, Materials in engineering, vol. 53, pp. 317-324.
Bansal, S., Kumar Misra, A. & Bajpai, P. 2017, “Evaluation of modified bituminous concrete mix developed using rubber and plastic waste materials”, International journal of sustainable built environment, vol. 6, no. 2, pp. 442-448.
Cao, X.S., Cao, D.W., Wu, Y.F., Yang, X.Q. & Liu, S.X. 2014, “Study on the effect of warm mix modifiers on the performance of guss asphalt”, Trans Tech Publications Ltd, Zurich, pp. 554
Gawande, A., Zamare, G., Renge, V., Tayde, S., Bharsakale, G.J.J.o.E.R., Studies, 2012. An overview on waste plastic utilization in asphalting of roads. 3(2), 1-5.
Hinislioglu, S. & Agar, E. 2004, “Use of waste high density polyethylene as asphalt modifier in asphalt concrete mix”, Materials letters, vol. 58, no. 3, pp. 267-271.
Hong, R., Wu, J. & Cai, H. 2020, “Low-temperature crack resistance of coal gangue powder and polyester fibre asphalt mixture”, Construction & building materials, vol. 238, pp. 117678.
Hwang, J., Choi, D., Han, S., Choi, J. & Hong, J. 2019, “An assessment of the toxicity of polypropylene microplastics in human derived cells”, The Science of the total environment, vol. 684, pp. 657-669.
Khan, I.M., Kabir, S., Alhussain, M.A. & Almansoor, F.F. 2016, “Asphalt Design Using Recycled Plastic and Crumb-rubber Waste for Sustainable Pavement Construction”, Procedia Engineering, vol. 145, pp. 1557-1564.
Sobolev, K., Vivian, I.F., Saha, R., Wasiuddin, N.M. & Saltibus, N.E. 2014, “The effect of fly ash on the rheological properties of bituminous materials”, Fuel, vol 116, pp. 471-477
Ge, L.H., Du, H. & Zhou, C. 2010 “Harmfulness of coal gangue and it's recycling utilization and development trend”, Coal Technol, Val 2010, pp. 9-11
Liu, Z., Zhang, C. & Qu, X. 2020, “Study on the Parameter Optimization and Strength Mechanism of Coal Gangue Emulsified Asphalt Mixture”, Advances in materials science and engineering, vol. 2020, pp. 1-12.
Liu, L.L., Fan, W.H. & Wang, R.P. The present situation of and development suggestions on the beneficial utilization of coal gangue in Shanxi Province Energy Conserv., 31 (11) (2012), pp. 4-7
Garside, M. Production of plastics worldwide from 1950 to 2019 (in million metric tons), Statista. (2021) 2018–2019. https://www.statista.com/statistics/282732/global-production-of-plastics-since-1950/ (accessed January 21, 2021).
Modarres, A., Rahmanzadeh, M., & Ayar, P. 2015, “Effect of coal waste powder in hot mix asphalt compared to convention—al fillers: Mix mechanical properties and environmental impacts[J]”, Journal of cleaner Production, 91 : 262—268．
Muniandy, R. & Aburkaba, E. 2011, “The effect of type and particle size of industrial wastes filler on indirect tensile stiffness and fatigue performance of Stone Mastic Asphalt Mixtures”, Australian journal of basic and applied sciences, vol. 5, no. 11, pp. 297-308.
Mutha, N.H., Patel, M. & Premnath, V. 2006, “Plastics materials flow analysis for India”, Resources, conservation and recycling, vol. 47, no. 3, pp. 222-244.
Panda, A.K., Singh, R.K. & Mishra, D.K. 2010, “Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products—A world prospective”, Renewable & sustainable energy reviews, vol. 14, no. 1, pp. 233-248.
Panda, M. & Mazumdar, M. 2002, “Utilization of Reclaimed Polyethylene in Bituminous Paving Mixes”, Journal of materials in civil engineering, vol. 14, no. 6, pp. 527-530.
Patel, M.K., Jochem, E., Radgen, P. & Worrell, E. 1998, “Plastics streams in Germany—An analysis of production, consumption and waste generation”, Resources, conservation and recycling, vol. 24, no. 3, pp. 191-215.
Peng, B., Guo, D., Qiao, H., Yang, Q., Zhang, B., Hayat, T., Alsaedi, A. & Ahmad, B. 2018, “Bibliometric and visualized analysis of China's coal research 2000–2015”, Journal of cleaner production, vol. 197, pp. 1177-1189.
Zuo, P.F. 2009, “Comprehensive utilization of coal gangue”, Coal Technol, pp. 186-189.
Prasad, B., Banerjee, N.N. & Dhar, B.B. 1996, “Environmental assessment of coal ash disposal: A review”, Journal of scientific & industrial research (New Delhi, India: 1963), vol. 55, no. 10, pp. 772-780.
Punith, V.S., Veeraragavan, A. & Amirkhanian, S.N. 2011, “Evaluation of Reclaimed Polyethylene Modified Asphalt Concrete Mixtures”, International journal of pavement research & technology, vol. 4, no. 1, pp. 1-10.
Querol, X., Izquierdo, M., Monfort, E., Alvarez, E., Font, O., Moreno, T., Alastuey, A., Zhuang, X., Lu, W. & Wang, Y. 2008, “Environmental characterization of burnt coal gangue banks at Yangquan, Shanxi Province, China”, International journal of coal geology, vol. 75, no. 2, pp. 93-104.
Sandberg, M., Klockars, K. & Wilén, K. 2019, “Green growth or degrowth? Assessing the normative justifications for environmental sustainability and economic growth through critical social theory”, Journal of cleaner production, vol. 206, pp. 133-141.
Stracher, G.B. & Taylor, T.P. 2004, “Coal fires burning out of control around the world; thermodynamic recipe for environmental catastrophe”, International journal of coal geology, vol. 59, no. 1-2, pp. 7-17.
Sung Do, H., Hee Mun, P. & Suk keun, R. 2008, “A study on engineering characteristics of asphalt concrete using filler with recycled waste lime”, Waste management (Elmsford), vol. 28, no. 1, pp. 191-199.
Su, Z., Li, X. & Zhang, Q. 2022, “Influence of thermally activated coal gangue powder on the structure of the interfacial transition zone in concrete”, Journal of cleaner production, vol. 363.
Tang, J., Wang, Q. & Choi, G. 2020, “Efficiency assessment of industrial solid waste generation and treatment processes with carry-over in China”, The Science of the total environment, vol. 726, pp. 138274-138274.
Tayfur, S., Ozen, H. & Aksoy, A. 2007, “Investigation of rutting performance of asphalt mixtures containing polymer modifiers”, Construction & building materials, vol. 21, no. 2, pp. 328-337.
Ullah, S., Raheel, M., Khan, R. & Tariq Khan, M. 2021, “Characterization of physical & mechanical properties of asphalt concrete containing low- & high-density polyethylene waste as aggregates”, Construction & building materials, vol. 301, pp. 124127.
Wang, J., Dai, Q. & Si, R. 2022, “Experimental and Numerical Investigation of Fracture Behaviors of Steel Fiber–Reinforced Rubber Self-Compacting Concrete”, Journal of materials in civil engineering, vol. 34, no. 1.
Xiong, R., Wang, L., Yang, X., Yang, F., Sheng, Y., Guan, B. & Chen, H. 2018, “Experimental investigation on related properties of asphalt mastic with activated coal gangue as alternative filler”, International journal of pavement research & technology.
Yang, X.K. Investigation on the Performance of Coal Gangue Powder/Brucite Fiber Composite Modified Asphalt Mixture Chang’an University, Xi’an, China (2016)
Xu, W., Qiu, X., Xiao, S., Hong, H., Wang, F. & Yuan, J. 2020, “Characteristics and mechanisms of asphalt–filler interactions from a multi-scale perspective”, Materials, vol. 13, no. 12, pp. 1-20.
Xu, X., Yu, J., Wang, R., Hu, J. & Xue, L. 2018, “Investigation of road performances of reaction-rejuvenated SBS modified asphalt mixture”, Construction & building materials, vol. 183, pp. 523-533.
Yang, W., Qi, J., Arif, M., Liu, M. & Lu, Y. 2021, “Impact of information acquisition on farmers’ willingness to recycle plastic mulch film residues in China”, Journal of cleaner production, vol. 297, pp. 126656.
Yang, X.K., Xiong, R., Yang, F., Yin, H.Q. & Yang, T. 2015, “Laboratory Investigation of the High Temperature Rheological Property of Activated Coal Gangue Modified Asphalt Binder”, Applied Mechanics and Materials, vol. 744-746, pp. 1261-1265.
Yang, Z., Chen, H., Du, L., Lu, W. & Qi, K. 2021, “Exploring the industrial solid wastes management system: Empirical analysis of forecasting and safeguard mechanisms”, Journal of environmental management, vol. 279, pp. 111627-111627.
Yao, S., Zhao, L., Yang, J., Jiang, H. & Nan, Y. 2021, “Preparation and characterization of coal gangue modified road asphalt”, Earth and Environmental Science, vol. 781, no. 4, pp. 42033.
Yehia, S., Douba, A.E., Abdullahi O., et al. Mechanical and durability evaluation of fiber-reinforced self-compacting concrete. Construction and Building Materials. 2016
Yu, L., Xia, J., Xia, Z., Chen, M., Wang, J. & Zhang, Y. 2022, “Study on the mechanical behavior and micro-mechanism of concrete with coal gangue fine and coarse aggregate”, Construction & building materials, vol. 338.
Guo, Y.X., Zhang, Y.Y. & Cheng, F.Q. Industrial development and prospect about comprehensive utilization of coal gangue Ciesc J., 65 (7) (2014), pp. 2443-2453
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L. & Chen, C. 2021, “Current technologies for plastic waste treatment: A review”, Journal of cleaner production, vol. 282.
Zhang, M., Wang, Y., Song, Y., Zhang, T. & Wang, J. 2016, “Manifest system for management of non-hazardous industrial solid wastes: Results from a Tianjin industrial park”, Journal of cleaner production, vol. 133, pp. 252-261.
Information & Authors
Information
Published In
International Conference on Road and Airfield Pavement Technology 2023
Pages: 390 - 400
History
Published online: Feb 6, 2024
ASCE Technical Topics:
- Coal
- Construction wastes
- Ecosystems
- Energy engineering
- Energy sources (by type)
- Engineering fundamentals
- Engineering materials (by type)
- Environmental engineering
- Fuels
- Highway and road management
- Highway transportation
- Highways and roads
- Infrastructure
- Materials engineering
- Measurement (by type)
- Mine wastes
- Non-renewable energy
- Pollutants
- Recycling
- Solid wastes
- Temperature effects
- Temperature measurement
- Transportation engineering
- Wastes
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.