Calculating the Embodied and Operational Carbon Footprint in Concrete Buildings: A Case Study Simulation to Mitigate Carbon Footprint
Publication: ASCE Inspire 2023
ABSTRACT
The Earth is absorbing greenhouse gas (GHG) emissions driven by the combination of population growth and human activities. Construction and related activities are the world’s largest energy-consuming and polluting human activities and are wreaking havoc on the environment. Construction material usage or production produces a significant amount of carbon and consumes a large volume of water. The evaluation and calculation of environmental impacts in the construction industry are always challenging for every building with various functions, whether during or after the construction phase, during the operation phase, or at the time of demolition. This study intends to determine the carbon footprint of residential buildings in Mazandaran Province, Iran, from construction to operation of concrete structures. Therefore, a building was selected as a case study of concrete structures in Babolsar, Iran. Material consumption in the building was estimated using quantity take-off and estimation methods. The carbon footprint of different materials’ weight per unit was extracted from authentic references, and the total footprint was calculated. By dividing this value by the floor area of the building, carbon produced per surface area unit was calculated. According to the calculations, the carbon footprint for structure framing materials in a concrete building was 464 kg-CO2eq/m2 and 18.5 kg-CO2eq/m2/year. The carbon footprint for building operations was determined using DesignBuilder software to calculate the annual energy-related kg-CO2eq/m2 production. Results show that 69 kg-CO2eq/m2/year of carbon was produced during one year through energy consumption in the case study.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Airaksinen, M., and Matilainen, P. (2011). A carbon footprint of an office building. Energies, 4(8), 1197–1210.
Anand, C. K., and Amor, B. (2017). Recent developments, future challenges and new research directions in LCA of buildings: A critical review. Renewable and sustainable energy reviews, 67, 408–416.
Biswas, W. K. (2014). Carbon footprint and embodied energy consumption assessment of building construction works in Western Australia. International Journal of Sustainable Built Environment, 3(2), 179–186.
Cabeza, L. F., Rincón, L., Vilariño, V., Pérez, G., and Castell, A. (2014). Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review. Renewable and sustainable energy reviews, 29, 394–416.
Fenner, A. E., Kibert, C. J., Woo, J., Morque, S., Razkenari, M., Hakim, H., and Lu, X. (2018). The carbon footprint of buildings: A review of methodologies and applications. Renewable and Sustainable Energy Reviews, 94, 1142–1152.
Fenner, A. E., Kibert, C. J., Li, J., Razkenari, M. A., Hakim, H., Lu, X., Kouhirostami, M. and Sam, M. (2020). Embodied, operation, and commuting emissions: A case study comparing the carbon hotspots of an educational building. Journal of Cleaner Production, 268, 122081.
Garg, V., Mathur, J., and Bhatia, A. (2020). Building Energy Simulation: A Workbook Using Designbuilder™. CRC Press.
Ghaderi, M., Asadi, P., and Kouhirostamkolaei, M. (2020). Applying response surface methodology on the results of serial sequencing batch moving bed reactor. SN Applied Sciences, 2(1), 1–12.
Gharleghi, M. (2015). How Iranian architects invented ways to stay cool. British Council. Retrieved from https://www.britishcouncil.org/voices-magazine/how-iranian-architects-invented-ways-stay-cool (2022).
Hammond, G., and Jones, C. (2008). Inventory of carbon & energy: ICE (Vol. 5). Bath: Sustainable Energy Research Team, Department of Mechanical Engineering, University of Bath.
Johnsson, F., Karlsson, I., Rootzén, J., Ahlbäck, A., and Gustavsson, M. (2020). The framing of a sustainable development goals assessment in decarbonizing the construction industry–Avoiding “Greenwashing”. Renewable and sustainable energy reviews, 131, 110029.
Kofoworola, O. F., and Gheewala, S. H. (2008). Environmental life cycle assessment of a commercial office building in Thailand. The International Journal of Life Cycle Assessment, 13(6), 498–511.
Kouhirostami, M. (2018). Natural ventilation through windows in a classroom (CFD analysis crossventilation of asymmetric openings: Impact of wind direction and louvers design) (Doctoral dissertation).
Kouhirostami, M., Abukhalaf, A. H. I., and Kouhirostamkolaei, M. (2022). Eliminating Air Pollution in Cities Through Sustainable Urban Planning. Academia Letters.
Kouhirostami, M., and Chini, A. R. (2022). Carbon emissions comparison in modular and site-built residential construction. Modular and Offsite Construction (MOC) Summit Proceedings, 233–240.
Kouhirostami, M., Kouhirostamkolaei, M., Sam, M., and Asutosh, A. (2020). Impact of louvers geometry of window on cross-ventilation in a generic isolated building in rigid climate, case study: Lubbock, TX. In 108th ACSA Annual Meeting OPEN: Reinvented Annual Meeting.
Kouhirostamkolaei, M., Kouhirostami, M., Sam, M., Woo, J., Asutosh, A. T., Li, J., and Kibert, C. (2021). Analyzing the Effect of Materials’ Selection on Energy Saving and Carbon Footprint: Case Study Simulation of Concrete Structure Building. International Journal of Civil and Environmental Engineering, 15(3), 157–165.
Kumanayake, R., Luo, H., and Paulusz, N. (2018). Assessment of material related embodied carbon of an office building in Sri Lanka. Energy and Buildings, 166, 250–257.
Li, X. J., and Zheng, Y. D. (2020). Using LCA to research carbon footprint for precast concrete piles during the building construction stage: A China study. Journal of Cleaner Production, 245, 118754.
Lu, K., Jiang, X., Tam, V. W., Li, M., Wang, H., Xia, B., and Chen, Q. (2019). Development of a carbon emissions analysis framework using building information modeling and life cycle assessment for the construction of hospital projects. Sustainability, 11(22), 6274.
Noorpoor, A. R., and Kudahi, S. N. (2015). CO2 emissions from Iran’s power sector and analysis of the influencing factors using the stochastic impacts by regression on population, affluence and technology (STIRPAT) model. Carbon Management, 6(3-4), 101–116.
Pakdel, A., Ayatollahi, H., and Sattary, S. (2021). Embodied energy and CO2 emissions of life cycle assessment (LCA) in the traditional and contemporary Iranian construction systems. Journal of Building Engineering, 39, 102310.
Pawar, B. S., and Kanade, G. N. (2018). Energy optimization of building using design builder software. International Journal of New Technology and Research, 4(1), 263152.
Ridhosari, B., and Rahman, A. (2020). Carbon footprint assessment at Universitas Pertamina from the scope of electricity, transportation, and waste generation: toward a green campus and promotion of environmental sustainability. Journal of Cleaner Production, 246, 119172.
Sharma, A., Saxena, A., Sethi, M., and Shree, V. (2011). Life cycle assessment of buildings: a review. Renewable and Sustainable Energy Reviews, 15(1), 871–875.
Wright, L. A., Kemp, S., and Williams, I. (2011). ‘Carbon footprinting’: towards a universally accepted definition. Carbon management, 2(1), 61–72.
Yu, M., Wiedmann, T., Crawford, R., and Tait, C. (2017). The carbon footprint of Australia’s construction sector. Procedia engineering, 180, 211–220.
Zhang, X., and Wang, F. (2016). Assessment of embodied carbon emissions for building construction in China: Comparative case studies using alternative methods. Energy and Buildings, 130, 330–340.
Zomorodian, Z. S., and Tahsildoost, M. (2018). Energy and carbon analysis of double skin façades in the hot and dry climate. Journal of Cleaner Production, 197, 85–96.
Information & Authors
Information
Published In
History
Published online: Nov 14, 2023
ASCE Technical Topics:
- Buildings
- Business management
- Carbon fibers
- Case studies
- Concrete
- Concrete structures
- Construction engineering
- Construction industry
- Construction management
- Construction materials
- Engineering fundamentals
- Engineering materials (by type)
- Fibers
- Materials engineering
- Methodology (by type)
- Practice and Profession
- Research methods (by type)
- Residential construction
- Structural engineering
- Structures (by type)
- Sustainable development
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.