Vision-Based Measurements for Monitoring a Rehabilitated Corrugated Metal Pipe Culvert
Publication: Structures Congress 2023
ABSTRACT
Technological advancements have facilitated the application of digital image correlation (DIC) in condition assessment, structural evaluation, and even structural health monitoring (SHM). Specifically, the advantages of using vision-based measurement approaches include but are not limited to high accuracy for non-contact, non-destructive measurements over long distances (e.g., 50 m). The accuracy and robust measurements obtained when taking video-based measurements are leading engineers to use them for faster deployment than mounted sensor arrays. In this study, the structural performance of a corroded corrugated metal pipe (CMP) culvert rehabilitated with a spray applied pipe liner (SAPL) is monitored by using a commercial DIC system and video-based post-processing capabilities to characterize in situ behavior. The culvert is subjected to different static and dynamic loads resulting in deformations captured by video-based measurements before and after the CMP has been lined with a spray applied pipe liner (SAPL) to evaluate its effect during load testing. Despite poor lighting conditions and circumstantial limitations such as the forbiddance of mounting hanging targets, the DIC system captured the deformations of the culvert when subjected to a set of controlled load tests. The lining improved the structural performance of the culvert by increasing its ring stiffness, and the semi-beam behavior of the culvert under the loads. The recorded data also validated the structural behavior observed in the finite element (FE) model of the culvert before and after it was lined.
Get full access to this article
View all available purchase options and get full access to this chapter.
References
ASTM C76-19b, Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe, ASTM International, West Conshohocken, PA, 2019, www.astm.org
Braun, Adam. “How to Assess the Transition from Indirect to Direct Design Methods in Deep Cover Installations.” http://www.concretepipe.org/secure/tracks/2018/Engineering:Technical%20Marketing:Sales/IndirectDirectDesign_Braun.pdf. PowerPoint Presentation.
Brownjohn, J. M. W., Y. Xu, and D. Hester. 2017. “Vision-based bridge deformation monitoring.” Front. Built Environ. 3: 23.
Chen, J. G., N. Wadhwa, Y. -J. Cha, F. Durand, W. T. Freeman, and O. Buyukozturk. 2015. “Modal identification of simple structures with high-speed video using motion magnification.” J. Sound Vib. 345: 58–71.
Concrete Pipe Design Manual. American Concrete Pipe Association, 2007.
DuBose, T., Safari, S., Shenton, H.W., Tatar, J., Chajes, M.J., Karam, J., Hastings, J.N. and Head, M.H., 2022. Diagnostic load testing and assessment of a rehabilitated culvert with spray applied pipe liner. In Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability (pp. 1344-1352). CRC Press.
Ezzeldin, I. and El Naggar, H., 2021. Three-dimensional finite element modeling of corrugated metal pipes. Transportation Geotechnics, 27, p.100467.
Ghyabi, M., Timber, L.C., Jahangiri, G., Lattanzi, D., Shenton III, H.W., Chajes, M.J. and Head, M.H., 2023. Vision-Based Measurements to Quantify Bridge Deformations. Journal of Bridge Engineering, 28(1), p.05022010.
Head, M.H. and Timber, L., 2022. Live Load Distribution of Slab-on-Girder Bridges Using Vision-based Measurements. Special Publication, 352, pp.68–77.
Imetrum-Website. (n.d.). “Home” Imetrum. Accessed December 19, 2022. https://www.imetrum.com.
Kadivar, M., Manahiloh, K.N., Kaliakin, V.N. and Shenton, H.W., 2018. Numerical investigation of dynamic load amplification in buried culverts. Transportation Infrastructure Geotechnology, 5(1), pp.24–41.
Kang, J.S. and Davidson, J.S., 2013. Structural effects of concrete lining for concrete-lined corrugated steel pipes. Structure and Infrastructure Engineering, 9(2), pp.130–140.
Kohankar Kouchesfehani, Z., Darabnoush Tehrani, A. and Najafi, M., 2021. “Culvert Renewal with Cementitious-Geopolymer Spray–Applied Pipe Lining: Field Data Collection and Assessment”. Journal of Pipeline Systems Engineering and Practice, 12(3), p.04021028.
Korky, S.J., Najafi, M., Syar, J.E. and Nandyala, V.K., 2019. “Evaluation of literature on design and performance of spray applied pipe linings for renewal of culverts and drainage structures”. In Pipelines 2019: Multidisciplinary Topics, Utility Engineering, and Surveying (pp. 75-83). Reston, VA: American Society of Civil Engineers.
Kouchesfehani, Z.K., Tehrani, A.D., Najafi, M. and Syar, J., 2020. Laboratory testing of invert-cut corrugated metal pipes renewed with polymeric spray applied pipe lining. Transportation geotechnics, 25, p.100413.
Liu, C., Yuan, Y. and Zhang, M., 2016. Uncertainty analysis of displacement measurement with Imetrum Video Gauge. ISA transactions, 65, pp.547–555.
Moore, I.D., 2001. Buried pipes and culverts. In Geotechnical and geoenvironmental engineering handbook (pp. 541–567). Springer, Boston, MA.
Moore, I.D. and García, D.B., 2015. Ultimate strength testing of two deteriorated metal culverts repaired with spray-on cementitious liners. Transportation Research Record, 2522(1), pp.139–147.
Najafi, M., Yu, X., Kouchesfehani, Z.K., Tehrani, A.D., Korky, S., Serajiantehrani, R., Raut, S., Kampbell, E. and Osborn, L., 2021. Structural Design Methodology for Spray Applied Pipe Liners in Gravity Storm Water Conveyance Conduits (No. FHWA/OH-2021/10). Ohio. Dept. of Transportation.
NCSPA. 2008. Corrugated steel pipe design manual. National Corrugated Steel Pipe Association, Dallas, Texas
Oats, R.C., Dai, Q. and Head, M., 2022. Digital Image Correlation Advances in Structural Evaluation Applications: A Review. Practice Periodical on Structural Design and Construction, 27(4), p.03122007.
Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD). American Society of Civil Engineers, 2017.
Sutton, M. A., J. J. Orteu, and H. Schreier. 2009. Image correlation for shape, motion and deformation measurements: Basic concepts, theory and applications. Berlin: Springer Science & Business Media.
Tehrani, A.D., Kouchesfehani, Z.K., Najafi, M., Syar, J.E. and Kampbell, N.E., 2019. Evaluation of filling the valleys of corrugated metal pipes by trenchless spray applied pipe linings. In Pipelines 2019: Multidisciplinary topics, utility engineering, and surveying (pp. 84-94). Reston, VA: American Society of Civil Engineers.
Wagener, B.D. and Leagjeld, E.E., 2014. Culvert repair best practices, specifications and special provisions: Best practices guidelines (No. MN/RC 2014–01). Department of Transportation, Research Services & Library.
Wu, J., Liang, J. and Adhikari, S., 2014. Dynamic response of concrete pavement structure with asphalt isolating layer under moving loads. Journal of Traffic and Transportation Engineering (English Edition), 1(6), pp.439–447.
Yoneyama, S., and H. Ueda. 2012. “Bridge deflection measurement using digital image correlation with camera movement correction.” Mater. Trans. 53 (2): 285–290.
Information & Authors
Information
Published In
History
Published online: May 1, 2023
ASCE Technical Topics:
- Construction engineering
- Construction methods
- Culverts
- Engineering fundamentals
- Engineering materials (by type)
- Finite element method
- Infrastructure
- Linings
- Load tests
- Materials engineering
- Metals (material)
- Methodology (by type)
- Numerical methods
- Pipeline management
- Pipeline systems
- Pipes
- Rehabilitation
- Structural behavior
- Structural engineering
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.