Analytical Method for Predicting Lateral Facing Deflection of Geosynthetic-Reinforced Soil Abutment Walls
Publication: Geo-Congress 2023
ABSTRACT
Geosynthetic-reinforced soil (GRS) walls have been recently used as bridge abutments to directly support spread footings on the reinforced soil mass. This application reduces the requirement for using traditional deep foundations, such as piles or drilled shafts, to support bridge beams. GRS abutment walls are generally subjected to high footing loads that are close to the wall facing. Although GRS abutment walls with modular block facing have been the subject of a number of studies, there are limited methods to predict the profile of the lateral facing deflections along the height of the GRS abutment walls. Lateral deflections along the facing of GRS walls are of significant importance and are difficult to predict. In practice, design engineers need numerical modeling or software to predict the deflection profile. The objectives of this study were to develop an analytical approach to estimate lateral deflections of the wall facing along the height of the GRS abutment walls. Two sets of equations were developed, and experimental test results were used for verification of the proposed analytical approach. There is agreement between the results from proposed approach and the measured data. The maximum lateral deflections predicted from the proposed equations are almost identical to the measured data. The facing lateral deflection profiles with depth are within close range of measured data. The proposed analytical equations for determining lateral deflections provide an effective and simple tool in design of the GRS abutment walls.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Adams, M., Nicks, J., Stabile, T., Schlatter, W., and Hartmann, J. (2012). Geosynthetic reinforced soil integrated bridge system, interim implementation guide. Federal Highway Administration.
Berg, R. R., Christopher, B. R., and Samtani, N. C. (2009). Design and construction of mechanically stabilized earth walls and reinforced soil slopes. US Department of Transportation, Federal Highway Administration.
Christopher, B. R., Gill, S. A., Giroud, J. P., Juran, I., Mitchell, J. K., Schiosser, F., and Dunnicliff, J. (1990). Reinforced Soil Structures, Vol. I: Design and Construction Guidelines. Federal Highway Administration.
Giroud, J. P. (1989). Geotextile engineering workshop-design examples. Federal Highway Administration.
Han, J. (2021). “Limit equilibrium analysis and design of geosynthetic-reinforced fill walls under special conditions.” Indian Geotechnical Journal, 51(1), pp.50–62.
Hatami, K., and Bathurst R. J. (2006). “Numerical Model for Reinforced Soil Segmental Walls under Surcharge Loading.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(6), 673–684.
Helwany, S. M., Wu, J. T., and Froessl, B. (2003). “GRS bridge abutments—an effective means to alleviate bridge approach settlement.” Geotextiles and Geomembranes, 21(3), pp. 177–196.
Jewell, R. A., and Milligan, G. W. E. (1989). “Deformation calculation for reinforced soil walls.” Proc., 12th International Conference on Soil Mechanics and Foundation Engineering, Vol. 2. Taylor & Francis, Abingdon, U.K., pp. 1259–1262.
Kazimierowicz-Frankowska, K., and Kulczykowski, M. (2021). “Deformation of model reinforced soil structures: Comparison of theoretical and experimental results.” Geotextiles and Geomembranes, Volume 49, Issue 5, pp. 1176–1191.
Khosrojerdi, M., Xiao, M., Qiu, T., and Nicks, J. (2020). “Prediction equations for estimating maximum lateral displacement and settlement of geosynthetic reinforced soil abutments.” Computers and Geotechnics, 125, p.103622.
Kakrasul, J. I., Han, J., and Rahmaninezhad, S. M. (2018). “Laboratory evaluation of deformations of geosynthetic-reinforced retaining walls subjected to footing loading.” 11th International Conference on Geosynthetics, Seoul, Korea.
Lee, K. Z., and Wu, J. T. (2004). “A synthesis of case histories on GRS bridge-supporting structures with flexible facing.” Geotextiles and geomembranes, 22 (4), pp. 181–204.
Pham Q. T. (2009). Investigating Composite behavior of Geosynthetic-Reinforced Soil (GRS) Mass. Ph.D. Dissertation, University of Colorado Denver.
Rahmaninezhad, S. M., and Han, J. (2021). “Lateral facing deflections of geosynthetic-reinforced retaining walls under footing loading.” Transportation Geotechnics, 30 (2021) 100594.
Rahmaninezhad, S. M., Han, J., Al-Naddaf, M., and Mamaghanian, J. (2021). “Limit equilibrium analysis of geosynthetic-reinforced retaining wall-supported footings.” 2021 Geosynthetics Conference Proceedings, pp. 691–701.
Rahmaninezhad, S. M., Han, J., and Al-Naddaf, M. (2020). “Limit equilibrium analysis of geosynthetic-reinforced retaining walls subjected to footing loading.” In Geo-Congress 2020: Engineering, Monitoring, and Management of Geotechnical Infrastructure, pp. 464–471.
Rahmaninezhad, S. M. (2019). Geosynthetic Reinforced Retaining Walls with Flexible Facing under Footing Loading. Ph.D. Dissertation, Civil, Environmental and Architectural Engineering Department, The University of Kansas. Lawrence, KS, USA.
Saghebfar, M., Abu-Farsakh, M., Ardah, A., Chen, Q., and Fernandez, B. A. (2017). “Performance monitoring of geosynthetic reinforced soil integrated bridge system (GRS-IBS) in Louisiana.” Geotextiles and Geomembranes, 45(2), pp. 34–47.
Skinner, G. D., and Rowe, R. K. (2005). “Design and behaviour of a geosynthetic reinforced retaining wall and bridge abutment on a yielding foundation.” Geotextiles and geomembranes, 23(3), pp. 234–260.
Tatsuoka, F., Tateyama, M., Koseki, J., and Yonezawa, T. (2014). “Geosynthetic-reinforced soil structures for railways in Japan.” Transportation Infrastructure Geotechnology, 1 (1), pp. 3–53.
Wu, J. T., Pham, T. Q., and Adams, M. T. (2013). Composite behavior of geosynthetic reinforced soil mass. Federal Highway Administration.
Wu, J. T., and Pham, T. Q. (2013). “Load-carrying capacity and required reinforcement strength of closely spaced soil-geosynthetic composites.” Journal of Geotechnical and Geoenvironmental Engineering, 139(9), pp.1468–1476.
Wu, J. T. (1994). Design and construction of low cost retaining walls: The next generation in technology. Colorado Transportation Institute.
Wu, J. T., Lee, K. Z., and Pham, T. (2006). “Allowable bearing pressures of bridge sills on GRS abutments with flexible facing.” Journal of Geotechnical and Geoenvironmental Engineering, 132(7), pp. 830–841.
Xie, Y., Leshchinsky, B., and Han, J. (2019). “Evaluation of bearing capacity on geosynthetic-reinforced soil structures considering multiple failure mechanisms.” Journal of Geotechnical and Geoenvironmental Engineering, 145(9), p.04019040.
Xiao, C., Han, J., and Zhang, Z. (2016). “Experimental study on performance of geosynthetic-reinforced soil model walls on rigid foundations subjected to static footing loading.” Geotextiles and geomembranes, 44(1), pp. 81–94.
Zheng, Y., Fox, P. J., Shing, P. B., and McCartney, J. S. (2019). “Physical model tests of half-scale geosynthetic reinforced soil bridge abutments. I: Static loading.” Journal of Geotechnical and Geoenvironmental Engineering, 145(11), p.04019094.
Information & Authors
Information
Published In
Geo-Congress 2023
Pages: 345 - 358
History
Published online: Mar 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.