Assessing the Critical Depth Concept for Piles Driven in Cohesionless Soils
Publication: Geo-Congress 2023
ABSTRACT
The goal of this study is to assess the existing design methods for piles driven in cohesionless soils with an explicit focus on the concept of critical depth. The critical depth is defined as the depth below which the shaft resistance of driven piles does not change; above this depth, the shaft resistance increases with depth reaching to its maximum value at the critical depth. In this study, the critical depth in common design methods for driven piles installed in cohesionless soils is first estimated as a function of the pile width. We then compare the different critical depths from the various design methods to determine the wide variability in such depth among the considered design methods. Thereafter, we assess the validity of the critical depth concept in light of recent arguments that have challenged such a concept. In the end, we present a driven pile design example to compare the ultimate static capacity of the pile estimated using methods that consider the critical depth and those that do not. The significance of the critical depth is then assessed based on the results of this design example.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Altaee, A., B. H. Fellenius, and E. Evgin. 1993. “Load transfer for piles in sand and the critical depth”, Canadian Geotechnical Journal, 30: 455–63.
Clemente, J. L. M. 1992. “Discussion of “Performance of Axially Loaded Pipe Piles in Sand”; by Leland M. Kraft Jr. (February, 1991, Vol. 117, No. 2)”, Journal of Geotechnical Engineering, 118: 832–35.
Coyle, H. M., and R. R. Castello. 1981. “New Design Correlations For Piles in Sand”, Journal of Geotechnical and Geoenvironmental Engineering, 107: 965–86.
Duncan, J. M., S. G. Wright, and T. L. Brandon. 2014. Soil strength and slope stability (John Wiley & Sons).
Eslami, A., F. Valikhah, M. Veiskarami, and M. Salehi. 2017. “CPT-based investigation for pile toe and shaft resistances distribution”, Geotechnical and Geological Engineering, 35: 2891–905.
Felenius, B. H. 1991. Foundation Engineering Handbook, Editor HS Fang. In.: Van Nostrand Reinhold Publisher, New York.
Fellenius, B. H. 2021. Basics of Foundation Design.
Fellenius, B. H., and A. Altaee. 1995. “Critical Depth: How it Came Into Being and Why It Does Not Exist”, Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 113: 107–11.
Hanna, T. H., and R. H. S. Tan. 1973. “The Behavior of Long Piles Under Compressive Loads in Sand”, Canadian Geotechnical Journal, 10: 311–40.
Hannigan, P. J., G. G. Goble, G. Thendean, G. E. Likins, and F. Rausche. 1998. Design and construction of driven pile foundations-volume I. In.: United States. Federal Highway Administration. Office of Technology Applications.
Kerisel, J. 1964. “Deep Foundations Basic Experimental Facts.” In North American Conference on Deep Foundations, 5–44. Mexico City.
Kraft, L. M. 1991. “Performance of Axially Loaded Pipe Piles in Sand”, Journal of Geotechnical Engineering, 117: 272–96.
Kulhawy, F. H. 1984. Limiting Tip and Side Resistance - Fact or Fallacy? In.
Lehane, B. M., R. J. Jardine, A. J. Bond, and R. Frank. 1993. “Mechanisms of Shaft Friction in Sand from Instrumented Pile Tests”, Journal of Geotechnical Engineering, 119: 19–35.
Lings, M. L. 1997. “Predicting the Shaft Resistance of Driven Pre-formed Piles in Sand”, Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 125: 71–84.
McCammon, N. R., and H. Q. Golder. 1970. “Some loading tests on long pipe piles”, Géotechnique, 20: 171–84.
Mitchell, J. K. 1981. “Soil improvement-state of the art report.” In Proc., 11th Int. Conf. on SMFE, 509–65.
Meyerhof, G. G. 1976. “Bearing Capacity and Settlement of Pile Foundations”, Journal of Geotechnical and Geoenvironmental Engineering, 102: 195–228.
Nordlund, R. L. 1963. “Bearing capacity of piles in cohesionless soils”, Journal of the Soil Mechanics and Foundations Division, 89: 1–35.
Potyondy, J. G. 1961. “Skin Friction between Various Soils and Construction Materials”, Géotechnique, 11: 339–53.
Robert, Y. 1997. “A few comments on pile design”, Canadian Geotechnical Journal, 34: 560–67.
Stas, C. V., and F. H. Kulhawy. 1984. “Critical evaluation of design methods for foundations under axial uplift and compression loading.” In.: Cornell Univ., Ithaca, NY (USA). Geotechnial Engineering Group.
Tavenas, F. A. 1971. “Load Tests Results on Friction Piles in Sand”, Canadian Geotechnical Journal, 8: 7–22.
Tien, N. T. 1981. “Design of piles in non-cohesive soil.” In SGI Varia, 150. Linkoping: Swedish Geotechnical Institute.
Uesugi, M., and H. Kishida. 1986. “Influential Factors of Friction Between Steel and Dry Sands”, Soils and Foundations, 26: 33–46.
Vesic, A. S. 1970. “Tests on Instrumented Piles, Ogeechee River Site”, Journal of the Soil Mechanics and Foundations Division, 96: 561–84.
Information & Authors
Information
Published In
Geo-Congress 2023
Pages: 251 - 259
History
Published online: Mar 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.