Effect of Particle Size Distribution on Monotonic Shear Strength and Stress-Dilatancy of Coarse-Grained Soils
Publication: Geo-Congress 2023
ABSTRACT
Natural soil deposits can consist of particles with a wide range of sizes. In current practice, the assessment of shear strength and stress-dilatancy behavior of coarse-grained soils is based on methods developed for poorly graded sands, without explicit consideration for differences in gradation. This paper investigates the influence of the range of particle sizes on the monotonic shear strength and the stress-dilatancy response of poorly- to well-graded soils. Using the 3D discrete element method (DEM), the applicability of commonly used sand-based stress-dilatancy frameworks is assessed for a range of gradations. This DEM investigation employs clumps of spheres to accurately simulate the particle shapes on specimens with coefficients of uniformity (CU) varying between 1.9 and 6.9. These specimens were subjected to isotropically consolidated drained triaxial compression at various relative densities and confining stresses with the objective of isolating the effects of particle size distribution from those of particle shape. The peak and critical state shear strengths and the dilatancy responses of the specimens with different gradations are evaluated. For the same state parameter, the results indicate an increase in the shear strength and rate of dilation as the range of particle sizes increases. However, the critical state line shifts downward, and its slope decreases as CU is increased. The DEM results are compared to Bolton’s stress-dilatancy relationship to highlight the inadequacies of using clean sand-based frameworks in capturing the behavior of well-graded soils.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ahmed, S. S. (2021). Study on Particle Shape, Size and Gradation Effects on the Mechanical Behavior of Coarse-Grained Soils, PhD Thesis. University of California, Davis.
Altuhafi, F. N., and Coop, M. R. (2011). “Changes to particle characteristics associated with the compression of sands.” Géotechnique, 61(6), 459–471.
Been, K., and Jefferies, M. G. (1985). “A State Parameter for Sands.” Géotechnique. 35(2), 99–112.
Bolton, M. D. (1986). “The strength and dilatancy of sands.” Géotechnique, 36(1), 65–78.
Carey, T. J., Chiaradonna, A., Love, N. C., Wilson, D. W., Ziotopoulou, K., Martinez, A., and DeJong, J. T. (2022). “Effect of soil gradation on embankment response during liquefaction: A centrifuge testing program.” Soil Dynamics and Earthquake Engineering 157, p. 107221.
Chakraborty, T., and Salgado, R. (2010). “Dilatancy and shear strength of sand at low confining pressures.” Journal of Geotechnical and Geoenvironmental Engineering, 527–532.
Chang, W. J., and Phantachang, T. (2016). Effects of gravel content on shear resistance of gravelly soils. Engineering Geology, 207, 78–90.
Chiaradonna, A., Ziotopoulou, K., Carey, T. J., DeJong, J. T., and Boulanger, R. W. (2022). “Dynamic Behavior of Uniform Clean Sands: Evaluation of Predictive Capabilities in the Element- and the System-Level Scale.” In Geo-Congress 2022. American Society of Civil Engineers.
Da Cruz, F., Emam, S., Prochnow, M., Roux, J., and Chevoir, F. (2005). “Reophysics of dense granular materials: Discrete simulation of plane shear flows.” Physical Review, 72, 021309.
Fragaszy, R. J., Su, W., and Siddiqi, F. H. (1990). “Effects of oversize particles on the density of clean granular soils,” Geotechnical Testing Journal, GTJODJ, 13(2), 106–114.
Fragaszy, R. J., Su, W., Siddiqi, F. H., and Ho, C. L. (1992). “Modeling strength of sandy gravel,” Journal of Geotechnical Engineering Division, ASCE, 118(6), 920–935.
Hamidi, A., Azini, E., and Masoudi, B. (2012). “Impact of gradation on the shear strength-dilation behavior of well graded sand-gravel mixtures.” Scientia Iranica, 19(3), 393–402.
Harehdasht, S. A., Karray, M., Hussien, M. N., and Chekired, M. (2017). “Influence of particle size and gradation on the stress-dilatancy behavior of granular materials during drained triaxial compression.” International Journal of Geomechanics, 17(9).
Houlsby, G. T. (1991). “How the dilatancy of soils affects their behaviour.” In Proceedings of the Tenth European Conference on Soil Mech. and Foundation Engg., Vol. 4. pp. 1189–1202.
Huang, X., Hanley, K. J., O’Sullivan, C., and Kwok, F. C. (2014). “Effect of sample size on the response of DEM samples with a realistic grading.” Particuology. 15, 107–115.
Kuei, K. C., DeJong, J. T., and Martinez, A. (2020). “Particle Size Effects on the Strength and Fabric of Granular Media.” In Geo-Congress 2020, American Society of Civil Engineers.
Li, X. S., and Wang, Y. (1998). Linear representation of steady-state line for sand. J Journal of Geotechnical and Geoenviromental. Engineering 12(1215), 1215–1217.
Li, G., Liu, Y., Dano, C., and Hicher, P. (2014). “Grading-Dependent Behavior of Granular Materials: From Discrete to Continuous Modeling.” J. Eng. Mech. 141(6), 04014172.
Liu, Y., Li, G., Yin, Z., Dano, C., Hicher, P., Xia, X., and Wang, J. (2014). “Influence of grading on the undrained behavior of granular materials.” Comptes Rendus Mecanique. 342, 85–95.
O’Sullivan, C. (2011). Particulate Discrete Element Modelling a Geomechanics Perspective Spon Press, London.
Reardon, R., Humire, F., Ahmed, S. S., Ziotopoulou, K., Martinez, A., and DeJong, J. T. (2022). “Effect of Gradation on the Strength and Stress-Dilatancy of Coarse-Grained Soils: A Comparison of Monotonic Direct Simple Shear and Triaxial Tests.” In Geo-Congress 2022, American Society of Civil Engineers.
Rowe, P. W. (1962). “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 269(1339), 500–527.
Simoni, A., and Houlsby, G. T. (2006). “The direct shear strength and dilatancy of sand-gravel mixtures.” Geotechnical and Geological Engineering, 24(3), 523–549.
Sturm, A. P. (2019). On the liquefaction potential of gravelly soils: characterization, triggering and performance. PhD Thesis. University of California, Davis.
Vaid, Y. P., and Sasitharan, S. (1992). “The strength and dilatancy of sand.” Canadian Geotechnical Journal, 29(3), 522–526.
Wang, Z.-L., Dafalias, Y. F., Li, X.-S., and Makdisi, F. I. (2002). “State pressure index for modelling sand behaviour.” Journal of Geotechnical and Geoenviromental. Engg.128(6), 511–519.
Wood, D. M., and Maeda, K. (2008). “Changing grading of soil: effect on critical states”. Acta Geotechnica. 3, 3–14.
Youd, T. L. (1973). “Factors controlling maximum and minimum densities of sands. Evaluation of Relative Density and its Role in Geotechnical Projects Involving Cohesionless Soils.” In. ASTM International. West Conshohocken, PA. pp. 98–112.
Zheng, J., and Hryciw, R. D. (2015). “Traditional soil particle sphericity, roundness and surface roughness by computational geometry.” Geotechnique 65(6), 494–506 (2015).
Information & Authors
Information
Published In
Geo-Congress 2023
Pages: 302 - 312
History
Published online: Mar 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.