Effect of Water Content on Internal Erosion of an Unsaturated Slope

Soil piping is the gradual and progressive erosion of soil grains, causing a void (open pipe) to form as water flows through the soil. In dam engineering, this type of internal erosion is often referred to as concentrated leak erosion and has been a cause of failure at multiple dams. Soil piping has also been observed in many landslides and contributes significantly to soil degradation in hillslopes and agricultural areas. Despite these many important impacts, there is still limited understanding of how soil pipes develop and progress and what factors control pipe stability. One of the significant challenges with analyzing soil piping, or concentrated leak erosion, is that it typically occurs in the vadose zone, where unsaturated conditions are present. However, most studies examining internal erosion have focused on saturated conditions, and few studies have examined the role unsaturated hydraulic properties (i.e., air entry value, matric suction, etc.) may play in the likelihood of internal erosion. Consequently, this study aims to explore the mechanisms controlling the erosion rate within soil pipes from the perspective of unsaturated soil mechanics. Bench-scale experiments were performed to examine the formation and progression of an eroded pipe in a small slope constructed at different water contents. Soil samples were also tested to measure its unsaturated hydraulic properties. The results show that the likelihood of pipe formation varies with the moisture content and, therefore, suction in the soil, as does the potential for pipe collapse. This demonstrates that unsaturated soil properties are key to understanding the formation and progression of piping in slopes.