Examination of Smart Sandbags for Semi-Permanent Structures on the Lunar Surface
Publication: Earth and Space 2022
ABSTRACT
Development of the lunar surface will likely be a pivotal step in the emerging space economy. In recent years it has been confirmed that water is present in the polar craters of the Moon. The Moon is also rich in iron, titanium, and silicon; which may be mined with the appropriate lunar facilities. Motivation to erect a lunar base aligns with the NASA Artemis objectives for a human return to the Moon. In order to achieve Artemis objectives, bases must be erected in a manner that allows for flexibility and mobility. In this way, semi-permanent structures are an ideal mode for facilities to exist on the lunar surface. The optimal method to achieve these structures would be to utilize existing sandbag technologies to innovate lunar-appropriate bases. In the early stages of prospecting and open pit mining, there will likely need to be mobile pilot bases setup that need to perform in-depth evaluation and attempt pilot scale mining at different sites before permanent structures can be installed. We propose simple, multifunctional building blocks such as “smart sandbags” for constructing rapid, low-cost semi-permanent structures. Smart sandbags are filled with lunar-regolith and embedded with structure and impact sensors, and adopt a designed 3D customizable shape. The sandbags will be made of carbon fiber fabrics and integrated with silicone to combat the abrasiveness of lunar sand. Options for rigidization of the sandbags will also be explored with methods such as UV-cured resin or hydrogel. Innovatively designed features of our sandbag structures include the ability to be quickly assembled and disassembled, utilization of in situ resources, and effectiveness under a variable number of ground conditions. The semi-permanent structures are expected to provide shielding from collisions, radiation, maximize surface traction, and provide human habitat. Our studies show that the feasibility of the sandbag structure for use under different lunar surface conditions. Further in-depth investigations will need to be performed to quantify the potential improvement offered by sandbag structures over conventional brick laying and additive manufacturing.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCE
Abu El Samid, N., J. Thangavelautham, G.M.T. D’Eleuterio (2008). “Infrastructure Robotics: A Technology Enabler for Lunar In-Situ Resource Utilization, Habitat Construction and Maintenance,” in Proceedings of the International Astronautic Conference, Scotland.
Anderson, S., J. Thangavelautham (2021). “Solar-Powered Additive Manufacturing in Extraterrestrial Environments,” Proceedings of the Earth and Space Conference.
Bradley, D., D. Seward (1998). The development, control and operation of an autonomous robotic excavator. Journal of Intelligent and Robotic Systems, 21:73–97.
Beckers, R., O. E. Holland, J. L. Deneubourg (1994). From local actions to global tasks: Stigmergy and collective robots. In Fourth Int. Workshop on the Syntheses and Simulation of Living Systems, pages 181–189. MIT Press.
Bonabeau, E., G. Theraulaz, J. Deneubourg, S. Aron, S. Camazine (1997). Self-organization in social insects. In Trends in Ecology and Evolution, volume 12, pages 188–193.
Bonabeau, E., M. Dorigo, G. Theraulaz (1999). Swarm Intelligence: From Natural to Artificial Systems. Oxford Univ. Press, New York.
Babuscia, A., T. Choi, K. Cheung, J. Thangavelautham, M. Ravichandran, A. Chandra (2015). “Inflatable antenna for CubeSat: Extension of the previously developed s-band design to the X-band,” AIAA Space, 2015.
Bame S. J., W. C. Feldman, J. T. Gosling, D. T. Young, R. D. Zwickl (1983). What magnetospheric workers should know about solar wind composition. In Energetic Ion Composition in the Earth’s Magnetosphere (R. G. Johnson, ed.), pp. 73–98. Terra, Tokyo.
Babuscia, A., J. Sauder, J. Thangavelautham, E. Choi, A. Chandra (2016). “Inflatable Antenna for CubeSats: Development of the X-band Prototype, Proceedings of the IEEE Aerospace Conference.
Babuscia, A., J. Sauder, A. Chandra, J. Thangavelautham (2017). “Inflatable Antenna for CubeSats: A New Spherical Design for Increased X-band Gain,” Proceedings of the IEEE Aerospace Conference.
Babuscia, A., J. Sauder, A. Chandra, J. Thangavelautham (2019). “Inflatable Antenna for CubeSat,” Chapter 6, CubeSat Antenna Design, Chahat, N., Editor, Wiley/IEEE, pp. 197–231, 2020.
Bergman, T. L., A. Lavine, F. P. Incropera. Fundamentals of Heat and Mass Transfer. John Wiley & Sons, Inc.
Chantemargue, F., T. Dagaeff, M. Schumacher, B. Hirsbrunner (1996). Implicit cooperation and antagonism in multi-agent systems.
Chandra, A., J. Thangavelautham, A. Babuscia (2018). “Composite Inflatable Antennas for Small-Satellite and Backup Communication,” 24th Ka-band and Broadband Communications Conference, Niagara Fall, Canada.
Churchill, Susanne (1997). Fundamentals of Space Life Sciences (Malabar, Florida: Krieger Publishing Company): 13–16.
Earon, E., J. Thangavelautham, T. Liu, H. Armstrong, G.M.T. D’Eleuterio, D. Boucher, M. Viel, J. Richard (2009). “A Multiagent Methodology for Lunar Robotic Mission Risk Mitigation,” in Proceedings of AIAA Space Conference.
Finkenzeller, Klaus (2010). RFID handbook: fundamentals and applications in contactless smart cards, radio frequency identification and near-field communication. John wiley and sons, Mendell, Wendell W. Lunar bases and space activities of the 21st century. Lunar and Planetary Institute, 1985.
Feldman W. C., J. R. Ashbridge, S. J. Bame, J. T. Gosling (1977). Plasma and magnetic fields from the Sun. In The Solar Output and its Variation (O. R White, ed.), pp. 351– 382. Colorado Assoc. Univ., Boulder.
Grasse, P. (1959). La reconstruction du nid les coordinations interindividuelles; la theorie de stigmergie. In Insectes Sociaux, volume 35, pages 41–84.
Halbach, E., V. Zhmud, A. Halme (2013). Simulation of robotic regolith mining for base construction on mars. In Proceedings of the 12th Symposium on Advanced Space Technologies in Automation and Robotics (ASTRA), pages 1–7.
Heiken, G., D. Vaniman, B. M. French (1991). “Lunar sourcebook: a user’s guide to the Moon,” Cambridge (England), Cambridge University Press.
Husain, Y. (2000). “Space-Friendly Architecture: Meet Nader Khalili.” Space.com.
Hassan, Mohamed A., A. Elzawawi (2015). “Wireless Power Transfer through Inductive Coupling.” Recent Advances in Circuits pp. 115–118.
Khalili, N. (2008). “Emergency Sandbag Shelter and EcoVillage Manual,” Cal-Earth Press.
Katauskas, T. (1998). “Dirt-Cheap Houses from Elemental Materials.” Architecture Week.
Kayser, M. (2011). “Solar Sinter.” Master’s Thesis, Royal College of Art, London.
Kurs, A., A. Karalis, R. Moffatt, J. D. Joannopoulos, P. Fisher, and M. Soljacic (2007). “Wireless power transfer via strongly coupled magnetic resonances,” Science, vol. 317, no. 5834, pp. 83–86.
Khsohnevis, B., G. Bekey (2002). “Automated Construction Using Contour Crafting: Applications on Earth and Beyond,” International Symposium on Automation and Robotics in Construction, 19th (ISARC). Proceedings. National Institute of Standards and Technology.
Lu, X., P. Wang, D. Niyato, D. I. Kim, Z. Han (2016). “Wireless Charging Technologies: Fundamentals, Standards, and Network Applications,” in IEEE Communications Surveys & Tutorials, vol. 18, no. 2, pp. 1413–1452.
Mataric, M. J., M. Nilsson, K. T. Simsarian (1995). Cooperative multi-robot box-pushing. In IEEE/RSJ IROS, pages 556–561.
McGuire R. E., T. T. von Rosenvinge, F. B. McDonald (1986) The composition of solar energetic particles. Astrophys. J., 301, 938–961.
Mottaghi, S., H. Benaroya (2015). “Design of a Lunar Surface Structure. I: Design Configuration and Thermal Analysis.” Journal of Aerospace Engineering 28, no. 1 : 04014052.
Napp, N., R. Nagpal (2012). Distributed amorphous ramp construction in unstructured environments. In Proceedings of the Distributed Autonomous Robotic Systems (DARS) 12., pages 1–15.
Nealy, John E. et al. (1988). Solar-Flare Shielding With Regolith at Lunar-Base Site, NASA Technical Paper 2869 (Hampton, Virginia: Langley Research Center).
Parker, C. A., H. Zhang, R. C. Kube (2003). Blind bulldozing: Multiple robot nest construction. In IEEE/RSJ Int. Conference on Intelligent Robots and Systems, pages 2010–2015.
Prawiro, Satrio Yudo, and Muhammad Ary Murti (2018). “Wireless power transfer solution for smart charger with RF energy harvesting in public area.” 2018 IEEE 4th World Forum on Internet of Things (WF-IoT). IEEE.
Reid, R. (2020). “Space Place”, The Civil Engineering Magazine, American Society of Civil Engineers.
Skonieczny, K., D. Wettergreen (2016). Advantages of continuous excavation in lightweight planetary robotic operations. 35:1121–1139.
Stewart, R., A. Russell (2003). Emergent structures built by a minimalist autonomous robot using a swarm inspired template mechanism. In The First Australian Conference on ALife (ACAL2003), pages 216–230.
Stewart, R., A. Russell (2004). Building a loose wall structure with a robotic swarm using a Spatio-temporal varying template. In IEEE/RSJ Int. Conference on Intelligent Robots and Systems. pages 712–716.
Sonawane, N., J. Thangavelautham (2017). “Precision Pointing of Antennas and Science Instruments in Space using Arrays of Shape Memory Alloy based Linear Actuators,” Proceedings of the 40th AAS Guidance and Control Conference, 2017.
Simpson, J. A. (1983) Elemental and isotopic composition of the galactic cosmic rays. Annu. Rev. Nucl. Part. Sci., 33, 323–381.
Silberberg, R. et al. (1985). “Radiation Transport of Cosmic Ray Nuclei in Lunar Material and Radiation Doses,” Lunar Bases and Space Activities of the 21st Century, NASA Symposium Publication (Houston, Texas: Lunar and Planetary Institute).
Tang, Y., J. Fuh, H. Loh, Y. Wong, L. Lu (2003). “Direct laser sintering of a silica sand,” Materials and Design, vol. 24, no. 8, pp. 623–629
Thangavelautham, J., T. Barfoot, G. M. T. D’Eleuterio (2003). Coevolving communication and cooperation for lattice formation tasks (updated). In Advances In Artificial Life: Proc. of the 7th European Conference on ALife (ECAL), pages 857–864.
Thangavelautham, J., K. Law, T. Fu, N. Abu El Samid, A. D. S. Smith, G. M. T. D’Eleuterio (2017).” Autonomous Multirobot Excavation for Lunar Applications,” Robotica, pp. 1–33.
Thangavelautham, J. (2008). “A Regulatory Theory of Cortical Organization and Its Application to Robotics.” PhD Thesis, University of Toronto
Thangavelautham, J., N. Abu El Samid, P. Grouchy, E. Earon, T. Fu, N. Nagrani, G. M. T. D’Eleuterio (2009). “Evolving Multirobot Excavation Controllers and Choice of Platforms Using Artificial Neural Tissue Controllers,” Proceedings of the IEEE Symposium on Computational Intelligence for Robotics and Automation, Injeon, South Korea, pp. 1–10.
Thangavelautham, J., D. Strawser, S. Dubowsky (2017). “Long-Life Micro Fuel Cell Power Supply for Mobile Field Sensor Network Modules,” International Journal of Hydrogen Energy, Vol 42, No. 31, pp. 1–22
Thangavelautham, J., A. Chandra, E. Jensen (2019). “Autonomous Multirobot Technologies for Mars Mining Base Construction and Operation,” 70th International Astronautic Congress.
Thangavelautham, J. (2020). “Autonomous Robot Teams for Lunar Mining Base Construction and Operation,” IEEE Aerospace Conference 2020, Big Sky, MT
Thangavelautham, J. (2020). “Autonomous Robot Swarms for Off-World Construction and Resource Mining,” 2020 AIAA SciTech Forum, Orlando, FL
Thangavelautham, J., Y. Xu (2021). “Modelling Excavation, Site-Preparation and Construction of a Lunar Mining Base Using Robot Swarms,” Earth and Space Conference, Seattle, WA
Wawerla, J., G. Sukhatme, M. Matari (2002). Collective construction with multiple robots. In IEEE/RSJ Int.l Conference on Intelligent Robots and Systems, pages 2696–2701.
Wilson, M., C. Melhuish, A. B. Sendova-Franks, S. Scholes (2004). Algorithms for building annular structures with minimalist robots inspired by brood sorting in ant colonies. In Autonomous Robots, volume 17, pages 115– 136.
Xu, D., R. Su, J. Yeh, M. Momayez (2019). “Mapping Soil Layers Using Electrical Resistivity Tomography and Validation: Sandbox Experiments”, J. Hydr, Vol. 575, pp. 523–536.
R. Williams, J. Jadwick, “Handbook of Lunar Materials,” NASA RP-1057, 1980.
Xu, Y., J. Thangavelautham, J. (2020). “Co-Evolution of MultiRobot Controllers and Task Cues for Off-World Open Pit Mining,” iSAIRIS Conference
Information & Authors
Information
Published In
Earth and Space 2022
Pages: 652 - 668
History
Published online: Jan 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.