A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes
Publication: Earth and Space 2022
ABSTRACT
Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for in situ resource utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes, and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Hill, B. (2018). 45th Space Congress “The Next Great Steps”: Space Policy Directive-1.
Muff, T., Johnson, L., King, R., & Duke, M. B. (2004, February). A prototype bucket wheel excavator for the Moon, Mars and Phobos. In AIP conference proceedings (Vol. 699, No. 1, pp. 967–974). American Institute of Physics.
Boucher, D. S., & Richard, J. (2004). Report on the construction and testing of a bucket wheel excavator. P3N 1L1.
Clark, D. L., Patterson, R. R., & Wurts, D. W. (2009, September). A novel approach to planetary regolith collection: the bucket drum soil excavator. In AIAA space 2009 conference & exposition (p. 6430).
Metzger, P. T., Muscatello, A., Mueller, R. P., & Mantovani, J. (2013). Affordable, rapid bootstrapping of the space industry and solar system civilization. Journal of Aerospace Engineering, 26(1), 18–29.
Everingham, M. R., Pelster, N., Mueller, R. P., & Davidian, K. (2008, January). Preparation and Handling Large Quantities of JSC-1A Lunar Regolith Simulant for the 2007 Regolith Excavation Challenge. In AIP Conference Proceedings (Vol. 969, No. 1, pp. 268–273). American Institute of Physics.
Comstock, D. A., Petro, A. (2009). NASA’s Centennial Challenges contributions to ISRU. In:47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 1205.
Schuler, J. M., Smith, J. D., Mueller, R. P., Nick, A. J. (2019). RASSOR, the Reduced Gravity Excavator. Lunar ISRU 2019, Developing a New Space Economy through Lunar Resources and Their Utilization, 5061 (abs.), Lunar Planetary Institute, Workshop, July 15-17, 2019, Columbia, Maryland
Mueller, R. P., Smith, J. D. (2019). NASA Kennedy Space Center Swamp Works: capabilities and facilities. In: Lunar ISRU 2019, Developing a New Space Economy through Lunar
Resources and Their Utilization, 5069 (abs.). Lunar Planetary Institute, Workshop, July 15-17, 2019, Columbia, Maryland
Sowers, G. F., & Dreyer, C. B. (2019). Ice mining in lunar permanently shadowed regions. New Space, 7(4), 235–244.
Mueller, R., Schuler, J., Nick, A., Wilkinson, A., Gallo, C., & King, R. (2009, September). Lightweight bulldozer attachment for construction and excavation on the lunar surface. In AIAA SPACE 2009 conference & exposition (p. 6466).
Johnson, K., Creager, C., Izadnegahdar, A., Bauman, S., Gallo, C., & Abel, P. (2012). Development of field excavator with embedded force measurement. In Earth and Space 2012: Engineering, Science, Construction, and Operations in Challenging Environments (pp. 365–374).
Bauman, S., Newman, P., Izadnegahdar, A., Johnson, K., & Abel, P. (2016). A Basic Robotic Excavator (the “Glenn Digger”): Description, Design, and Initial Operation. National Aeronautics and Space Administration, Glenn Research Center.
Mueller, R. P., van Susante, P., Reiners, E., & Metzger, P. T. (2021). NASA Lunabotics Robotic Mining Competition 10th Anniversary (2010–2019): Taxonomy and Technology Review. Earth and Space 2021, 497–510.
Boucher, D. S., Atwell, J. T., Theiss, R., Armstrong, R., Benigni, S. (2011). Development and testing of an autonomous regolith excavation and delivery system. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, vol. 431.
Graham, L. D., Graff, T. G. (2013). Rover-based instrumentation and scientific investigations during the 2012 analog field test on Mauna Kea Volcano, Hawaii. In: Lunar and Planetary Science Conference.
Visscher, P. D., & Woolley, D. B. (2014). Lunar rover analogue mission deployments. In 7th Symposium on Space Resource Utilization (p. 0686).
Zacny, K., Mueller, R., Galloway, G., Craft, J., Mungas, G., Hedlund, M., … & Fink, P. (2009). Novel approaches to drilling and excavation on the moon. In AIAA SPACE 2009 Conference & Exposition (p. 6431).
Information & Authors
Information
Published In
History
Published online: Jan 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.