Safety Innovation Adoption in Construction: Role of Safety Compliance and Safety Attitude
Publication: Construction Research Congress 2022
ABSTRACT
Reliance on emerging technologies as pivotal tools for occupational safety and health (OSH) management in the construction industry is expected to rise with technological advancement and increased access to these innovative devices. Therefore, it is essential to uncover crucial factors that influence construction workers’ sustained use of technology for OSH management. Given that previous studies posit a relationship between behavior, worker attitude, and workers’ openness to innovation adoption, the present paper aims to investigate the potential connections between safety compliance (SC), safety attitude (SA), and construction workers’ safety innovativeness (SI). To achieve this aim, the authors surveyed 63 construction workers in the US. The SC and SA of workers were assessed using validated instruments and constructs, while safety innovativeness was assessed using items adapted from worker innovativeness research. Statistical analysis of the data revealed a positive and significant correlation between SC, SA, and a worker’s intention to adopt safety innovations (between 0.410 and 0.646). Also, analysis of the potential impact of demographic factors (work experience and worker designation) on the mean value of each construct suggests that there was no significant difference among the responses of the different demographic groups (p-value > 0.005). Therefore, the present study concludes that SC and SA could be significant predictors of SI. It is therefore recommended that future studies focused on developing and testing conceptual models for predicting the acceptance of technologies used for OSH management should include safety compliance and safety attitude constructs.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Abbasi, M. S., Tarhini, A., Hassouna, M., and Shah, F. (2015). “Social, organizational, demography and individuals’ technology acceptance behaviour: A conceptual model.” European Scientific Journal (Kocani), 11(9), 48.
Ahn, C. R., Lee, S., Sun, C., Jebelli, H., Yang, K., and Choi, B. (2019). “Wearable sensing technology applications in construction safety and health.” Journal of Construction Engineering and Management, 145(11), 03119007.
Akinlolu, M., Haupt, T. C., Edwards, D. J., and Simpeh, F. (2020). A bibliometric review of the status and emerging research trends in construction safety management technologies. International Journal of Construction Management, 1–13.
Al-Bayati, A. J., Albert, A., and Ford, G. (2019) “Construction Safety Culture and Climate: Satisfying the Necessity for an Industry Framework.” Practice Periodical on Structural Design and Construction, 24 (4).
Al-Bayati, A. J. (2021) “Impact of Construction Safety Culture and Construction Safety Climate on Safety Behavior and Safety Motivation.” Safety, 7, 41.
Aryee, S., and Hsiung, H. H. (2016). “Regulatory focus and safety outcomes: An examination of the mediating influence of safety behavior.” Safety science, 86, 27–35.
Berger, C. (2019). “Selling innovativeness in the automotive industry : The impact of communicated brand innovativeness, product innovativeness and communication channel on brand perception and brand engagement intentions.” Retrieved from <https://essay.utwente.nl/77139/> (Feb 25,2021).
Beus, J. M., Payne, S. C., Bergman, M. E., and Arthur, W. (2010). “Safety climate and injuries: An examination of theoretical and empirical relationships.” The Journal of Applied Psychology, 95(4), 713–727.
Chen, Q., and Jin, R. (2015). “A comparison of subgroup construction workers’ perceptions of a safety program.” Safety Science, 74, 15–26.
Cheng, T., and Teizer, J. (2013). “Real-time resource location data collection and visualization technology for construction safety and activity monitoring applications.” Automation in Construction 34 (2013) 3–15.
Fang, D., Chen, Y., and Wong, L. (2006). “Safety climate in construction industry: A case study in Hong Kong.” Journal of Construction Engineering and Management, 132(6), 573–584.
Fang, D., Huang, Y., Guo, H., and Lim, H. W. (2020). “LCB approach for construction safety.” Safety Science, 128, 104761.
Gore, J. (2010). Towards defining categories of innovativeness for the construction industry Retrieved from <https://vtechworks.lib.vt.edu/handle/10919/32720> (Feb 23, 2021).
Griffin, M. A., and Neal, A. (2000). “Perceptions of safety at work: A framework for linking safety climate to safety performance, knowledge, and motivation.” Journal of Occupational Health Psychology, 5(3), 347–358.
Guo, H., Yu, Y., and Skitmore, M. (2017). “Visualization technology-based construction safety management: A review.” Automation in Construction, 73, 135–144.
Hallowell, M. R., Hinze, J. W., Baud, K. C., and Wehle, A. (2013). “Proactive construction safety control: Measuring, monitoring, and responding to safety leading indicators.” Journal of Construction Engineering and Management, 139(10), 04013010.
Han, Y., Jin, R., Wood, H., and Yang, T. (2019). “Investigation of demographic factors in construction employees’ safety perceptions.” KSCE Journal of Civil Engineering, 23(7), 2815–2828.
He, C., Jia, G., McCabe, B., Chen, Y., and Sun, J. (2019). “Impact of psychological capital on construction worker safety behavior: Communication competence as a mediator.” Journal of safety research, 71, 231–241.
Hendarman, A. F., and Cantner, U. (2017). “Soft skills, hard skills, and individual innovativeness.” Eurasian Business Review, 8, 139–169.
Henning, J. B., Stufft, C. J., Payne, S. C., Bergman, M. E., Mannan, M. S., and Keren, N. (2009). “The influence of individual differences on organizational safety attitudes.” Safety Science, 47(3), 337–345.
Ilbeigi, M., Lurkin, V., and Garrow, L. A. (2019). “Using internet-based marketplaces to conduct surveys: An application to airline itinerary choice models.” Journal of Transportation Research, 103, 129–141.
Im, I., Hong, S., and Kang, M. S. (2011). “An international comparison of technology adoption: Testing the UTAUT model.” Information & management, 48(1), 1–8.
Ji, M., Liu, B., Li, H., Yang, S., and Li, Y. (2019). “The effects of safety attitude and safety climate on flight attendants’ proactive personality with regard to safety behaviors.” Journal of Air Transport Management, 78, 80–86.
Karakhan, A. A., and Gambatese, J. A. (2017). “Integrating worker health and safety into sustainable design and construction: Designer and constructor perspectives.” Journal of Construction Engineering and Management, 143(9), 04017069.
Karunarathna, D. M. T. G. N. M., and Siriwardana, C. S. A. (2018). “A tool to assess construction worker productivity.” Paper presented at the Moratuwa Engineering Research Conference (MERCon), 577–582.
Kashmiri, D., Namian, M., and Ghiasvand, E. (2020). “Role of safety attitude: Impact on hazard recognition and safety risk perception.” Paper presented at the ASCE, CRC, doi:https://doi.org/10.1061/9780784482872.063.
Mukaka, M. M. (2012). “A guide to appropriate use of correlation coefficient in medical research.” Malawi medical journal, 24(3), 69–71.
Neal, A., and Griffin, M. A. (2004). “A study of the lagged relationships among safety climate, safety motivation, safety behavior, and accidents at the individual and group levels.” Journal of Applied Psychology, 91(4), 946–953.
Nnaji, C., and Karakhan, A. A. (2020). “Technologies for safety and health management in construction: Current use, implementation benefits and limitations, and adoption barriers.” Journal of Building Engineering, 29, 101212.
Nnaji, C., Gambatese, J., Karakhan, A., and Eseonu, C. (2019), “Influential safety technology adoption predictors in construction.” Engineering, Construction and Architectural Management, 26(11), 2655–2681.
Okoye, P. U., Ezeokonkwo, J. U., and Ezeokoli, F. O. (2016) “Building Construction Workers’ Health and Safety Knowledge and Compliance on Site.” Journal of Safety Engineering, 5(1), 17–26.
Okpala, I., Nnaji, C., and Karakhan, A. A. (2020). “Utilizing emerging technologies for construction safety risk mitigation.” Practice Periodical on Structural Design and Construction, 25(2), 04020002.
Okpala, I., Nnaji, C., Awolusi, I., and Akanmu, A. (2021). “Developing a Success Model for Assessing the Impact of Wearable Sensing Devices in the Construction Industry.” Journal of Construction Engineering and Management, 147(7), 04021060.
Rau, P. P., Liao, P., Guo, Z., Zheng, J., and Jing, B. (2020). “Personality factors and safety attitudes predict safety behavior and accidents in elevator workers.” International Journal of Occupational Safety and Ergonomics, 26(4), 719–727.
Shin, M., Lee, H., Park, M., Moon, M., and Han, S. (2014). “A system dynamics approach for modeling construction workers’ safety attitudes and behaviors.” Accident Analysis and Prevention, 68, 95–105.
Siu, O. L., Phillips, D. R., and Leung, T. W. (2003). “Age differences in safety attitudes and safety performance in Hong Kong construction workers.” Journal of Safety Research, 34(2), 199–205.
Taber, K. (2018). “The use of cronbach’s alpha when developing and reporting research instruments in science education.” Research in Science Education, 48(6), 1273–1296.
Takim, R., and Akintoye, A. (2002). “Performance indicators for successful construction project performance.” 18th Annual ARCOM Conference. Association of Researchers in Construction Management, 2, 545–555.
Tam, C. M., Zeng, S. X., and Deng, Z. M. (2004). “Identifying elements of poor construction safety management in China.” Safety Science, 42(7), 569–586.
Tam, V., and Fung, I. (2012). “Behavior, attitude, and perception toward safety culture from mandatory safety training course”. Journal of Professional Issues in Engineering Education and Practice, 138(3), 207–213.
Vinodkumar, M. N., and Bhasi, M. (2010). “Safety management practices and safety behaviour: Assessing the mediating role of safety knowledge and motivation.” Accident Analysis and Prevention, 42(6), 2082–2093.
Welch, L. S., Russell, D., Weinstock, D., and Betit, E. (2015). “Best practices for health and safety technology transfer in construction.” American Journal of Industrial Medicine, 58(8), 849–857.
Yi, M. Y., Fiedler, K. D., and Park, J. S. (2006). “Understanding the role of individual innovativeness in the acceptance of IT-based innovations: Comparative analyses of models and measures.” Decision Sciences, 37(3), 393–426.
Zhou, Z., Irizarry, J., and Li, Q. (2013). “Applying advanced technology to improve safety management in the construction industry: A literature review.” Construction Management and Economics, 31(6), 606–622.
Zin, S. M., and Ismail, F. (2012). “Employers’ behavioural safety compliance factors toward occupational, safety and health improvement in the construction industry.” Procedia, Social and Behavioral Sciences, 36, 742–751.
Information & Authors
Information
Published In
Construction Research Congress 2022
Pages: 770 - 779
History
Published online: Mar 7, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.