Integrating 4D BIM and FDS to Simulate and Assess Fires in Buildings under Construction
Publication: Construction Research Congress 2022
ABSTRACT
Construction fires are a big threat to human life and property safety. Buildings under construction are largely unprotected as they are not yet equipped with fire protection systems. Consequently, any construction operation that fails to adhere to fire safety procedures will increase the fire risk to the site itself as well as to the adjacent buildings and put occupants at risk of injury and death. To enhance safety awareness and understanding of fire risks and consequences, it is necessary to provide construction participants a tool for fire risk assessment during early phases of a construction project at an activity level and on a daily basis. Therefore, this study proposes a modeling solution that applies a four-dimensional (4D) (3D + time) Building Information Model (BIM) along with the Fire Dynamics Simulator (FDS) tool to simulate and assess fires in buildings under construction. A numerical implementation is conducted as a case study to validate the practicality of the proposed work. This study is expected to promote awareness of construction fire safety as well as provide a tool for construction participants in better understanding and identifying construction fire risks. The study results can in turn help to mitigate fire hazards and prevent incidents from occurring during the early phases of a construction project, and ultimately reduce labor fatalities and injuries as well as property loss as a result of a construction fire hazard.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
ASTM. (2020). ASTM E119: Standard test methods for fire tests of building construction and materials. West Conshohocken, Pa: ASTM.
Baalisampang, T., Abbassi, R., Garaniya, V., Khan, F., and Dadashzadeh, M. (2018). “Review and analysis of fire and explosion accidents in maritime transportation.” Ocean Engineering, 158, 350–366.
Behm, M. (2005). “Linking construction fatalities to the design for construction safety concept.” Safety science, 43(8), 589–611.
Campbell, R. (2020, March). Fires in Structures Under Construction or Renovation. Retrieved March 30, 2020, from https://www.nfpa.org/News-and-Research/Data-research-and-tools/Building-and-Life-Safety/Fires-in-Structures-Under-Construction-or-Renovation.
Cerovsek, T. (2011). “A review and outlook for a ‘Building Information Model’(BIM): A multi-standpoint framework for technological development.” Advanced engineering informatics, 25(2), 224–244.
Chen, Y. J., Lai, Y. S., and Lin, Y. H. (2020). “BIM-based augmented reality inspection and maintenance of fire safety equipment.” Automation in Construction, 110, 103041.
Davis, R. J. (2012). “Construction, Alteration, and Demolition Operations.” Fire and Life Safety Inspection Manual, 101.
DeCicco, P. R. (Ed.). (2019). Computer Application in Fire Protection Engineering. Routledge.
Eastman, C. M., Eastman, C., Teicholz, P., Sacks, R., and Liston, K. (2011). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. John Wiley & Sons.
Hamledari, H., McCabe, B., Davari, S., and Shahi, A. (2017). “Automated schedule and progress updating of IFC-based 4D BIMs.” Journal of Computing in Civil Engineering, 31(4), 04017012.
IBC (International Building Code). 2021. : “Fire Safety Requirements for Building of Types IV-A, IV-B, and IV-C Construction”.
IFC (Industry Foundation Classes). (2018). buildingSMART International, Ltd., Retrieved from https://technical.buildingsmart.org/standards/ifc/.
Jin, Z., Gambatese, J., Liu, D., and Dharmapalan, V. (2019). “Using 4D BIM to assess construction risks during the design phase.” Engineering, Construction and Architectural Management, 26(11), 2637–2654. doi: https://doi.org/10.1108/ecam-09-2018-0379.
Khan, N., Ali, A. K., Van-Tien Tran, S., Lee, D., and Park, C. (2020). “Visual Language-Aided Construction Fire Safety Planning Approach in Building Information Modeling.” Applied Sciences, 10(5), 1704.
Laakso, M., and Kiviniemi, A. (2012). “The IFC standard: A review of history, development, and standardization, information technology.” Electron. J. Inf. Technol. Constr., 17(9), 134–161.
Meža, S., Turk, Ž., and Dolenc, M. (2014). “Component based engineering of a mobile BIM-based augmented reality system.” Automation in construction, 42, 1–12.
NFPA (National Fire Protection Association). (2019). Standard for the installation of sprinkler systems (Vol. 13, No. 2019). NFPA.
Ning, X., Qi, J., and Wu, C. (2018). “A quantitative safety risk assessment model for construction site layout planning.” Safety science, 104, 246–259.
OSHA (Occupational Safety and Health Administration). 1926 Subpart F in “Safety and Health Regulations for Construction”.
PyroSim [Computer software]. (2019). Retrieved from https://www.thunderheadeng.com/pyrosim/.
Schulte, P. A., Rinehart, R., Okun, A., Geraci, C. L., and Heidel, D. S. (2008). “National prevention through design (PtD) initiative.” Journal of safety research, 39(2), 115–121.
Subpart, B. (1926). Part 1926—Safety and Health Regulations for Construction. Safety, 1926, 15.
Sun, Q., and Turkan, Y. (2020). “A BIM-based simulation framework for fire safety management and investigation of the critical factors affecting human evacuation performance.” Advanced Engineering Informatics, 44, 101093.
Zhang, S., Teizer, J., Lee, J. K., Eastman, C. M., and Venugopal, M. (2013). “Building information modeling (BIM) and safety: Automatic safety checking of construction models and schedules.” Automation in Construction, 29, 183–195.
Zhang, D., Zhang, J., Xiong, H., Cui, Z., and Lu, D. (2019). “Taking Advantage of Collective Intelligence and BIM-Based Virtual Reality in Fire Safety Inspection for Commercial and Public Buildings.” Applied Sciences, 9(23), 5068.
Information & Authors
Information
Published In
Construction Research Congress 2022
Pages: 977 - 986
History
Published online: Mar 7, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.