Design of a Large Diameter Water Line at Active Fault Crossing
Publication: Pipelines 2021
ABSTRACT
A proposed 84-in. steel water line intersects the active normal dip-slip Woodgate Fault, of which the estimated vertical movement rate is approximately half inch per year with a down-to-the-coast dip angle of 77°. This surface water transmission main is owned by the North Harris County Regional Water Authority (NHCRWA) which comprises 335 square miles and includes approximately 710,000 residents. The anticipated vertical and horizontal movements within the design lifespan pose a significant risk to the water line since local buckling may occur due to excessive ground movement. Other challenges, such as (1) constraint of right of way (ROW), (2) balancing cost and reliability, and (3) accessibility for operation and maintenance (O&M), further complicate the design. To meet all design requirements, multiple design alternatives were evaluated, and an optimized “design and maintain” approach was selected. The design concept is verified and refined by finite element analysis (FEA) using a nonlinear Winkler-based soil spring model. It is found that the proposed O&M guidelines can reduce the risk of the water line by limiting the compressive strain induced in the steel carrier pipe, hence preventing local buckling. Also, the proposed approach reduces the overall construction cost while maintaining an acceptable level of reliability, and the O&M is facilitated by providing maximum accessibility to the couplings.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
ACPA (American Concrete Pipe Association). (2017). LRFD Fill Height Tables for Concrete Pipe.
ALA (American Lifelines Alliance). (2001). Guidelines for the Design of Buried Steel Pipe. FEMA (Federal Emergency Management Agency) and ASCE (American Society of Civil Engineers).
ALA (American Lifelines Alliance). (2005). Seismic Guidelines for Water Pipelines. FEMA (Federal Emergency Management Agency) and NIBS (National Institute of Building Sciences).
ASCE. (1984). Guidelines for Seismic Design of Design of Oil and Gas Pipeline Systems. ASCE (American Society of Civil Engineers), New York.
AWWA M9. (2008). Concrete Pressure Pipe. AWWA (American Water Works Association), Third Edition, Denver, CO.
Buco, J., Emeriault, F., and Kastner, R. (2008). “Full-scale experimental determination of concrete pipe joint behavior and its modeling.” J. Infrastruct. Syst., 14(3), 230-240.
Campbell, M.D., Campbell, M.D., and Wise, H.M. (2018). “Growth Faulting and Subsidence in the Houston, Texas Area: Guide to the Origins, Relationships, Hazards, Potential Impacts and Methods of Investigation: An Update.” J. Geol. Geosci., 2(1), 2018.
CSI. (2020). CSI Analysis Reference Manual. CSI (Computers and Structures, Inc.), Berkeley, CA.
Eidinger, J.M., O’Rourke, M., and Bachhuber, J. (2002). “Performance of pipeline at a fault crossing.” 7th U.S. National Conference of Earthquake Engineering, Oakland, CA.
Gantes, G.J., and Melissianos, V.E. (2016). “Evaluation of seismic protection methods for buried fuel pipelines subjected to fault rupture.” Front. Built Environ., https://doi.org/10.3389/fbuil.2016.00034.
HDR Engineering, Inc. (2020). Final Geotechnical Recommendations Reports. Houston, TX.
HVJ Associates, Inc. (2020). Phase II Geologic Fault Assessment Report. Houston, TX.
Kaya, E. S., Uckan, E., O’Rourke, M.J., Karamanos, S.A., Akbas, B., Cakir, F., and Cheng, Y. (2017). “Failure analysis of a welded steel pipe at Kullar fault crossing.” Eng. Fail. Anal., 71, 43-62.
Kennedy, R.P., Chow, A., and Williamson, R. (1977). “Fault movement effects on buried oil pipeline.” J. Transp. Eng., 103 (5), 617-633.
Liu, Y., Sun, X., Wang G., Turco M.J., Agudelo, G., Bao, Y., Zhao, R., and Shen, S. (2019). “Current activity of the Long Point Fault in Houston, Texas constrained by continuous GPS measurements.” Remote. Sens., https://doi.org/10.3390/rs11101213.
Newmark, N.M., and Hall, W.J. (1975). “Pipeline design to resist large fault displacement.” Proceedings of US national conference on earthquake engineering. Ann Arbor, MI, USA, pp. 416-425.
Norman, C., and Tand, K.E. (2016). “Revisit of the Houston fault problem.” Proceedings of CIGMAT (Center for Innovative Grouting Materials and Technology). Houston, TX, USA.
O’Rourke, M.J., and Liu, X. (2012). Seismic design of buried and offshore pipelines. MCEER (Multidisciplinary Center for Earthquake Engineering Research), Buffalo, NY.
Rojhani, M., Moradi, M., Galandarzadeh, A., and Takada, S. (2012). “Centrifuge modeling of buried continuous pipelines subjected to reverse faulting.” Can. Geotech. J., 49, 659-670.
Shi, J., Wang, Y., and Ng, C.W.W. (2016). “Numerical parametric study of tunneling-induced joint rotation angle in jointed pipelines.” Can. Geotech. J., 53, 2058-2071.
Shi, J., Wang, Y., and Chen, Y. (2017). “A simplified method to estimate curvatures of continuous pipelines induced by normal fault movement.” Can. Geotech. J., 55, 343-352.
Trifonov, O. V. (2015). “Numerical stress-strain analysis of buried steel pipelines crossing active strip-slip with an emphasis on fault modeling aspects.” J. Pipeline Syst. Eng. Pract., https://doi.org/10.1061/(ASCE)PS.1949-1204.0000177.
Qu, F., Lu, Z., Kim, J.W., and Zheng, W. (2020). “Identify and monitor growth faulting using In SAR over northern Greater Houston, Texas, USA.” Remote. Sens., https://doi.org/10.3390/rs11121498.
Uckan, E., Akbas, B., Shen, J., Rou, W., Paolacci, F., and O’Rourke, M. (2015). “A simplified analysis model for determining the seismic response of buried steel pipes at strike-slip fault crossings.” Soil Dyn. Earthq. Eng., 75, 55-65.
Vazouras, P., Karamanos, S. A., and Dakoulas, P. (2012). “Mechanical behavior of buried steel pipes crossing active strike-slip faults.” Soil Dyn. Earthq. Eng., 41, 164-180.
Information & Authors
Information
Published In
Pipelines 2021
Pages: 127 - 138
Copyright
© 2021 American Society of Civil Engineers.
History
Published online: Jul 29, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.