Evaluation of Occupant Response in Component and Full-Scale Aircraft Crash Testing and Simulation
Publication: Earth and Space 2021
ABSTRACT
In this study, the capability of component fuselage testing and finite-element models (FEMs) to predict occupant injury risk in a full-scale aircraft crash test was evaluated. Component and full-scale crash tests of a Fokker-F28 aircraft were performed in conjunction with representative FEM simulations. Lumbar spine injury risk calculated through anthropomorphic test device (ATD) outputs measured in the full-scale test was compared with predictions made by component testing and simulation. A quantitative assessment of FEM prediction accuracy was made using the International Organization for Standardization (ISO) Technical Report (TR) 16250 curve comparison methodology. Lumbar load injury risk measured in the full-scale test configuration was found to be significantly higher than the component tests performed. The FEM was found to provide a closer prediction of occupant injury risk than component testing but exhibited limitations in the multi-axis load environment. This work will help inform the application of component testing and FEM simulation when used to evaluate aircraft crashworthiness.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Anon. (1998). “MSC/NASTRAN quick reference guide,” version 70.5, MacNeal-Schwendler Corporation, Los Angeles, CA.
Federal Aviation Administration (FAA). (1988). “14 CFR part 25.562 emergency landing dynamic conditions.” Federal Aviation Regulation. Volume 53, Amdt. 25-64.
Federal Aviation Administration (FAA) (2006). “Dynamic evaluation of seat restraint systems and occupant protection on transport airplanes.” Federal Aviation Administration Advisory Circular, AC 25-562.
Guha, S. (2015). “README LSTC H3_95TH_DETAILED scaled.151214.V3.03_BETA,” Livermore Software Technology Corporation, MI.
Guha, S. (2014). “LSTC_NCAC hybrid III 50th dummy positioning & post-processing,” Livermore Software Technology Corporation, MI.
Gowdy, Van and., et al. (1999). “A lumbar spine modification to the hybrid iii atd for aircraft seat tests.”.
Humanetics (2013). “Hybrid III 5th percentile female dummy LS-DYNA model version 7.0.5 user manual.” Humanetics Innovative Solutions, Plymouth, MI.
Humanetics (2018). “User’s manual FAA hybrid III 50th male dummy LS-DYNA model version 1.2.3.” Humanetics Innovative Solutions, Plymouth, MI.
ISO/TR 16250 (2013). “International Standards Organization (ISO) technical report, “Road vehicles – Objective rating metrics for dynamic systems.”
Jackson, K. E., et al. (2018). “Finite element simulations of two vertical drop tests of F-28 fuselage sections.”.
Jackson, K. E., et al. (2020). “Development of a full-scale finite element model of the Fokker F28 fellowship aircraft and crash simulation predictions.” Proceedings of the 2020 ASCE Earth and Space Conference, Seattle, WA.
(2016), “Analysis of anthropomorphic test device (ATD) response for proposed orion crew impact attenuation system (CIAS).”
Littell, J. D., (2018). “A summary of results from two full-scale Fokker F28 fuselage section drop tests”.
Littell, J. D., (2020). “A summary of results from a Fokker F28 full-scale crash test,” NASA/TM. (In Pub).
LSTC (2017) “LS-DYNA theory manual”. Livermore Software Technology Company, Livermore, CA.
Panzer, M. B., et al. (2015) “THOR 50th male finite element model user manual model version 2.1 for LS-Dyna”.
Putnam, J. B., et al. (2014) “Development, calibration, and validation of a head–neck complex of THOR mod kit finite element model.” Traffic Injury Prevention 15(8): 844-854.
Putnam, J. B., et al. (2015) “Development and evaluation of a finite element model of the THOR for occupant protection of spaceflight crewmembers.” Accident Analysis & Prevention 82: 244-256.
Pellettiere, J., and Moorcroft, D. (2011). “Anthropomorphic test dummy lumbar load variation,” 22nd Enhanced Safety of Vehicles Conference, Washington, DC, Paper (No. 11-0157).
Society of Automotive Engineers (SAE) (2007). “Surface vehicle recommended practice: Instrumentation for impact test-part 1-electronic instrumentation,”.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Published online: Apr 15, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.