Construction Research Congress 2020
Application of Virtual Reality to Perform Ergonomic Risk Assessment in Industrialized Construction: Experiment Design
Publication: Construction Research Congress 2020: Safety, Workforce, and Education
ABSTRACT
Workers in the construction manufacturing industry are often exposed to the three primary causes of work-related musculoskeletal disorders (WMSDs): awkward body posture, forceful exertion, and repetitive motion. The investigation of the physical demands of body movement is thus needed during the design of machines and workstations to minimize WMSDs. In the context of the construction industry, this paper proposes the implementation of immersive virtual reality to ergonomically test the design of new workstations/machines with a particular focus on the assessment of human body posture. The application of VR techniques allows the testing of workstations and machines in a virtual environment that imitates their real operational settings while significantly reducing costs and implementation time. To demonstrate the applicability of VR to perform ergonomic risk assessment, a VR experiment is developed, and a pilot test is conducted. Information on body motion is collected and assessed using an existing risk assessment tool, rapid upper limb assessment; as a result, tasks with high ergonomic risks, in terms of awkward body posture, are identified. The obtained body motion data can be also used by engineers, industrial designers, and managers, to support decision making and thus results in improved machinery and workstation design.
Get full access to this article
View all available purchase options and get full access to this chapter.
ACKNOWLEDGEMENTS
The authors express their gratitude to Tianyu (Jayden) Jiang, Jin (Judy) Liu, and Val Sirbu for assisting in programming, gameplay scripting, and designing the 3D scenes used in the VR experiment. In addition, special thanks to all volunteers that participated in the experiment as well as to Jonathan Tomalty and Kristin Berg for assisting with the technical writing.
REFERENCES
Albert, A., Hallowell, M. R., Kleiner, B., Chen, A., and Golparvar-Fard, M. (2014). “Enhancing construction hazard recognition with high-fidelity augmented virtuality.” Journal of Construction Engineering and Management, 140(7):1.
AWCBC. (2019). “2017 Statistics.” <http://awcbc.org/?page_id=14> (Apr. 14, 2019).
Barkokebas, R., Ritter, C., Sirbu, V., Li, X., and Al-Hussein, M. (2019). “Application of Virtual Reality in Task Training in the Construction Manufacturing Industry.” Proc., 2019 International Symposium on Automation and Robotics in Construction (ISARC), Banff, Canada, 796–803.
Battini, D., Calzavara, M., Persona, A., Sgarbossa, F., Visentin, V., and Ilenia, Z. (2018). “Integrating mocap system and immersive reality for efficient human-centred workstation design.” IFAC Papers On Line, 51(11), 188–193.
Botti, L., Mora, C., and Regattieri, A. (2017). “Integrating ergonomics and lean manufacturing principles in a hybrid assembly line.” Computers & Industrial Engineering, 111, 481–491.
Brinzer, B., and Banerjee, A. (2017). “Measuring the human aspect: The key for managing the complexity in production.” Proc., International Conference on Human Aspects of Advanced Manufacturing (AHFE), Los Angeles, USA.
Caputo, F., Greco, A., D’Amato, E., Notaro, I., and Spada, S. (2018). “On the use of Virtual Reality for a human-centered workplace design.” Procedia Structural Integrity, AIAS 2017, 46th Conference on Stress Analysis and Mechanical Engineering Design, Pisa, Italy, 297–308.
Golabchi, A., Han, S., and Fayek, A. R. (2016). “A fuzzy logic approach to posture-based ergonomic analysis for field observation and assessment of construction manual operations.” Canadian Journal of Civil Engineering, 43(4), 294–303.
Golabchi, A., Guo, X., Liu, M., Han, S., Lee, S., and AbouRizk, S. (2018). “An integrated ergonomics framework for evaluation and design of construction operations.” Automation in Construction, 95, 72–85.
Guo, H., Li, H., Chan, G., and Skitmore, M. (2012). “Using game technologies to improve the safety of construction plant operations.” Accident Analysis & Prevention, 48, 204–213.
Han, S., Lee, S., and Peña-Mora, F. (2011). “Application of dimension reduction techniques for motion recognition: Construction worker behavior monitoring.” Computing in Civil Engineering, 102–109.
Hignett, S., and McAtamney, L. (2000). “Rapid Entire Body Assessment (REBA).” Applied Ergonomics, 31(2), 201-205.
Huang, T., Kong, C. W., Guo, H. L., Baldwin, A., and Li, H. (2007). “A virtual prototyping system for simulating construction processes.” Automation in Construction, 16(5), 576–585.
Inyang, N., Han, S., Al-Hussein, M., and El-Rich, M. (2012). “A VR model of ergonomics and productivity assessment in panelized construction production line.” Construction Research Congress 2012, West Lafayette, USA, 1084–1093.
Karhu, O., Kansi, P., and Kuorinka, I. (1977). “Correcting working postures in industry: A practical method for analysis.” Applied Ergonomics, 8(4), 199–201.
Karkee, M., Steward, B. L., Kelkar, A. G., and Kemp, Z. T. (2011). “Modeling and real-time simulation architectures for virtual prototyping of off-road vehicles.” Special Issue on Virtual Manufacturing and Construction, 15(1), 83–96.
Lawson, G., Salanitri, D., and Waterfield, B. (2016). “Future directions for the development of virtual reality within an automotive manufacturer.” Applied Ergonomics, 53, 323–330.
Li, G., and Buckle, P. (1999). “Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods.” Ergonomics, 42(5), 674–695.
Li, H., Chan, N. K. Y., Huang, T., Skitmore, M., and Yang, J. (2012). “Virtual prototyping for planning bridge construction.” Automation in Construction, 27, 1–10.
Li, X. (2017). Ergonomic risk assessment in construction manufacturing facilities. PhD Thesis, University of Alberta, Edmonton, Canada.
McAtamney, L., and Corlett, E. N. (1993). “RULA: a survey method for the investigation of work-related upper limb disorders.” Applied Ergonomics, 24(2), 91–99.
Michalos, G., Karvouniari, A., Dimitropoulos, N., Togias, T., and Makris, S. (2018). “Workplace analysis and design using virtual reality techniques.” CIRP Annals, 67(1), 141–144.
Peruzzini, M., Carassai, S., and Pellicciari, M. (2017). “The Benefits of Human-centred Design in Industrial Practices: Re-design of Workstations in Pipe Industry.” Procedia Manufacturing, Modena, Italy, 1247–1254.
Peruzzini, M., Pellicciari, M., and Gadaleta, M. (2019). “A comparative study on computer-integrated set-ups to design human-centred manufacturing systems.” Robotics and Computer Integrated Manufacturing, 55(B), 265–278.
PSHSA. (2010). “Repetitive work: Could you please repeat that … again and again and again?” <https://www.pshsa.ca/wp-content/uploads/2013/01/RepetitiveWorkInjury.pdf> (Apr. 14, 2019).
Sampaio, A. Z., Ferreira, M. M., Rosário, D. P., and Martins, O. P. (2010). “3D and VR models in Civil Engineering education: Construction, rehabilitation and maintenance.” Automation in Construction, 19(7), 819–828.
Whyte, J. (2007). Virtual reality and the built environment. CRC Press, Oxford, England.
Wolfartsberger, J. (2019). “Analyzing the potential of Virtual Reality for engineering design review.” Automation in Construction, 104, 27–37.
Zhang, H., Yan, X., and Li, H. (2018). “Ergonomic posture recognition using 3D view-invariant features from single ordinary camera.” Automation in Construction, 94, 1–10.
Zhao, D., and Lucas, J. (2015). “Virtual reality simulation for construction safety promotion.” International Journal Of Injury Control And Safety Promotion, 22(1), 57–67.
Information & Authors
Information
Published In
Construction Research Congress 2020: Safety, Workforce, and Education
Pages: 405 - 413
Editors: Mounir El Asmar, Ph.D., Arizona State University, David Grau, Ph.D., Arizona State University, and Pingbo Tang, Ph.D., Arizona State University
ISBN (Online): 978-0-7844-8287-2
Copyright
© 2020 American Society of Civil Engineers.
History
Published online: Nov 9, 2020
Published in print: Nov 9, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.