References

American Concrete Institute (ACI). 233R-95. (2003). “Slag cement in concrete and mortar.” ACI, Farmington Hills, Mich.

ACI. (2009). “ACI concrete terminology,” <http://terminology.concrete.org> accessed Feb. 12, 2010.

American Petroleum Institute (API). 13 B-1. (2003). “Recommended practice for field testing water-based drilling fluids.” API, Washington, D.C.

API. 13 B-2. (2005). “Recommended practice for field testing oil-based drilling fluids.” API, Washington, D.C.

API 1991. (1991). “Bleed under pressure.” API, Washington, D.C.

ASTM International (ASTM). C 94/C94M-09. (2009). “Standard specification for ready-mixed concrete.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. C 39/C39M-09. (2009). “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. C 109/C109M-08. (2008). “Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens).” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-01.

ASTM. C 114-09b/C114-09. (2009). “Standard test methods for chemical analysis for hydraulic cement.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-01.

ASTM. C 128-07a. (2007). “Standard test method for density, relative density (specific gravity), and absorption of fine aggregate.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. C 143/C143M-09. (2009). “Standard test method for slump of hydraulic-cement concrete.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. C 150/C150M-09. (2009). “Standard specification for portland cement.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-01.

ASTM. C191-08. (2008). “Standard test method for time of setting of hydraulic cement by Vicat needle.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-01.

ASTM. C204-07. (2007). “Standard test method for fineness of hydraulic cement by air permeability apparatus.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-01.

ASTM. C 939-02. (2002). “Standard test method for flow of grout for preplaced-aggregate concrete (flow cone method).” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. C 940-98a. (2003). “Standard test method for expansion and bleeding of freshly mixed grouts for preplaced-aggregate concrete in the laboratory.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04-02.

ASTM. D6556-09. (2009). “Standard test method for carbon black-total and external surface area by nitrogen adsorption.” ASTM, West Conshohocken, Penn., Book of Standards vol. 09-01.

ASTM. D 6910-04. (2004). “Standard test method for Marsh funnel viscosity of clay construction slurries.” ASTM, West Conshohocken, Penn., Book of Standards vol. 04–09.

ASTM. UOP856-07. (2007). “Particle size distribution of powders by laser light scattering.” ASTM, West Conshohocken, Penn.

Clarke, W. J.(1984). “Performance characteristics of microfine cement.” Preprint 84-023, ASCE Geotechnical Conference, Atlanta, Ga., May 14–18, ASCE, Reston, Va., 1–14.

Clarke, W. J., Boyd, M. D., and Helal, M. (1992). “Ultrafine cement test and dam grouting.” Grouting, soil improvement and geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 626–638.

Clarke, W. J., Schwarz, L. D., Moreno, P. O., and Borja, R. C. (1997). “Ultrafine cement-based grouting of dry joints in Huites Dam, Choix, Mexico.” Proc., Geo-Logan Conference on Grouting: Compaction, Remediation, and Testing, Utah, July 16–18, ASCE Geotechnical Special Publication 66, Vipulanandan C., ed., ASCE, Reston, Va., 133–146.

De Paoli, B., Bosco, B., Granata, R., and Bruce, D. (1992). “Fundamental observations on cement based grouts. 2: Microfine cements and the CEMILL process.” Proc., Grouting, Soil Improvement and Geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 474–485.

Engineering News Record (ENR). (2009). “Asphalt, cement, aggregate, concrete, brick, block, lime,” Sept. 7, pp. 19–20.

Federal Highway Administration (FHWA). (2006). “Blast furnace slag: Material description.” Turner-Fairbank Highway Research Center, <http://www.tfhrc.gov/hnr20/recycle/waste/bfs1.htm> accessed September 2, 2008.

Gallagher, P. M. (2000). “Passive site remediation for mitigation of liquefaction risk.” Ph.D. dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Va.

Garshol, K. F. (2007). Pre-excavation grouting in rock tunneling, UGC International, Division of BASF Construction Chemicals, Zürich, Switzerland.

Håkansson, U., Hässler, L., and Stille, H. (1992). “Rheological properties of microfine cement-based grouts with additives.” Proc., Grouting, Soil Improvement and Geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 551–563.

Henn, R. W. (1996). Practical guide to grouting of underground structures, ASCE Press, Reston, Va.

Henn, R. W., Davenport, J. C., Tzobery, S., and Bandimere, S. (2005). “Additional test results for comparison of penetration of grout made with various ultra-fine cement products.” Proc., Rapid Excavation and Tunneling Conference, Seattle, June 26–30, Society of Mining, Metallury and Exploration.

Henn, R. W., and Davenport, J. C. (2005). “Ultrafine cement: A critical component of a grouting program.” Tunnels & Tunneling Int., 37(4), 27–29.

Henn, R. W., ed. (2003). AUA guidelines for backfilling and contact grouting of tunnels and shafts, ASCE Press, Reston, Va.

Henn, R. W., Ganse, P., Bandimere, S., Smoak, G., and Warner, J. (2001). “Comparison of penetration test results of grouts made with various ultrafine cement products.” Proc., Rapid Excavation and Tunneling Conference, San Diego, June 10–14, Society of Mining, Metallurgy, and Exploration.

Houlsby, A. C. (1990). Construction and design of cement grouting, John Wiley & Sons, Inc., Hoboken, N.J.

International Society for Rock Mechanics (ISRM). (1995). Final report of the commission on rock grouting. ISRM, Lisbon, Portugal.

Kaufman, J., Winnefield, F., and Hesselbarth, D. (2004). “Effect of the additions of ultrafine cement and short fiber reinforcement on shrinkage, rheological and mechanical properties of portland cement,” Cement and Concrete Composites,26(5), 541–549.

Khayat, K. H., and Yahia, A. (1998). “Simple field tests to characterize fluidity and washout resistance of structural cement-based grout.” Cement, Concrete, and Aggregates, 20(1), 145–156.

Kosmatka, S. H., Kerhoff, B., and Panarese, W. C. (2002). “Design and control of concrete mixtures, EB001, 14th ed., Portland Cement Association, Skokie, Ill.

Krizek, R. J., Liao, H., and Borden R. H. (1992). “Mechanical properties of microfine cement/sodium silicate grouted sand.” Proc., Grouting, Soil Improvement and Geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 688–699.

Kumar, S., Singh, C. J., and Kachari, J. (2002). “Microfine cement: special superfine portland cement.” Oil and Natural Gas Corp., Ltd., <http://www.ongcindia.com/pring.asp?d=techpaper&cat=techpaper1.txt> accessed April 2, 2007.

Liao, H., Borden, R. H., and Krizek, R. J. (1992). “Microfine cement/sodium silicate grout.” Proc., Grouting, Soil Improvement and Geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 676–687.

Lombardi, G. (1985). “The role of cohesion in cement-based grouting of rock.” Proc., Fifteenth Congress on Large Dams, International Commission on Large Dams, Paris, 3(Q58, R13), Compania Anonima de Administracion y Fomento (CADAFE), Caracas, Venezuela, 235–261.

Naudts, A., and Landry, E. (2001). “New on-site wet milling technology for the preparation of ultrafine cement-based grouts,” <http://www.ecogrout.com/wetmilling.pdf> accessed Feb. 2010.

Perret, S., Khayat, K. H., Gangnon, E., and Rhazi, J. (2002). “Repair of 130-year-old masonry bridge using high-performance cement-based grout,” Journal of Bridge Engineering,7(1), 31–38.

Powers, J. P., Corwin, A. B., Schmall, P. C., and Kaeck, W. E. (2007). Construction dewatering and groundwater control: New methods and applications, 3rd ed., John Wiley & Sons, Inc., Hoboken, N.J.

Risk and Policy Analysts Limited. (2000). “Risk reduction strategy and analysis of advantages and drawbacks for acrylamide.” Prepared for the Department of the Environment, Transport and the Regions, Stage 4 Report, March, 2000, Contract No. CDEP 1/41/17.

Sarkar, S. L., and Wheeler, J. (2001a). “Important properties of an ultrafine cement: Part 1.” Cement and Concrete Res., 31(2), 119–123.

Sarkar, S. L., and Wheeler, J. (2001b). “Microstructural development in an ultra-fine cement: Part 2.” Cement and Concrete Res., 31(2), 125–128.

Schwarz, L. G., and Krizek, R. J. (1992). “Effects of mixing on rheological properties of microfine cement-based grout.” Proc., Grouting, Soil Improvement and Geosynthetics, New Orleans, La., February 25–28, ASCE Geotechnical Special Publication 30, Borden R. H., Holtz R. D., and Juran I., eds., ASCE, Reston, Va., 512–525.

Schwarz, L. G., and Krizek, R. J. (2000). “Evolving morphology of early age microfine cement-based grout.” Advances in Grouting and Ground Modification, Proc., Sessions of Geo-Denver 2000, Denver, Colo., August 5–8. ASCE Geotechnical Special Publication 104, Krizek R. J. and Sharp K., eds., ASCE, Reston, Va., 181–199.

Shuguang, H., Guan, X., and Ding, Q. (2002). “Research on optimizing components of microfine high-performance composite cementitious materials,” Cement and Concrete Research,32(12), 1871–1875.

Sottili, L., and Padovani, D. (2002). “Effect of grinding aids in the cement industry.” Petrochem, St. Petersburg, Russia, April 14–16.

Sutch, P., and Dirth, L. (2006). Geology study manual, 2006 review for the National (ASBOG) Geology Licensing Exam, REG Review, Inc., Bedford, N.H.

Warner, J. (2007). “Types of grout and grout rheology.” Proc., Grouting Fundamentals and Current Practice, Colorado School of Mines, April 30–May 4, Colorado School of Mines, Golden, Colo.

Warner, J. (2004). Practical handbook of grouting, soil, rock, and structures, John Wiley & Sons, Inc., Hoboken, N.J.

Weaver, K. D., and Bruce, D. A. (2007). Dam foundation grouting, ASCE Press, Reston, Va.