References

American Society of Civil Engineers (ASCE). (1975). Sedimentation engineering, ASCE Manuals and Reports on Engineering Practice No. 54, ASCE, New York, N.Y.

Barkdoll, B. D., Ettema, R., and Odgaard, A. J. (1999). “Sediment control at lateral diversions: Limits and enhancements to vane use,” J. Hydraul. Eng., 125(8), 862–870.

Biedenham, D. S., Elliot, C. M., and Watson, C. C. (1997). “The WES stream investigation and streambank stabilization handbook,” U.S. Army Corps of Engineers, Vicksburg, Miss.

Bledsoe, B. P., and Watson, C. C. (2001). “Logistic analysis of channel pattern thresholds: Meandering, braiding, and incising,” Geomorphology, 38, 281–300.

Chabert, J., Remillieux, M., and Spitz, I. (1961). “Application de la circulation transversale a la correction des rivieres et a la protection des prises d’eauProc., Ninth Conv., IAHR, Dubrovnik, Yugoslavia, 1216–1223 (in French).

Chang, H. H. (1988). Fluvial processes in river engineering, John Wiley & Sons, New York, N.Y.

Dahm, J., and Hume, T. M. (1989). “An investigation of sediment intake problems at Huntly Power Station,” Electricity Corporation of New Zealand, Production Division, Huntly Power Station, Huntly, New Zealand.

DeWitt, R. J., and Odgaard, A. J. (1991). “Submerged vane projects for bank stabilization and sedimentation management,” Proc. National Conf. on Hydraulic Engineering, ASCE, Nashville, Tennessee, July 29–August 2.

Doyle, M. W., Shields, D., Boyd, K. F., Skidmore, P. B., and DeWitt, D. (2007). “Channel-forming discharge selection in river restoration design,” J. Hydraul. Eng., 133(7), 831–837.

Eibeck, P. A., and Eaton, J. K. (1987). “Heat transfer effect of a longitudinal vortex embedded in a turbulent boundary layer,” J. Heat Transf., Transaction of the ASME, 109(1), 16–24.

Electric Power Research Institute (EPRI). (1995). “Review of river-bed sediment problems at intakes,” EPRI Report No. TR-105201, EPRI, Palo Alto, Calif.

EPRI. (1997). “A laboratory study of sediment control at riverside water intakes,” EPRI Report No. TR-108621, EPRI, Palo Alto, Calif.

EPRI. (1998). “Bed-sediment control at riverside water intakes: A guide for utility engineers,” EPRI Report No. TR-110551, EPRI, Palo Alto, Calif.

Ettema, R. (1990). “Bathymetric survey of the Cedar River at the Duane Arnold Energy Center,” IIHR LD Report No. 166, The University of Iowa, Iowa City, Iowa.

Fitzpatrick, F. A., Peppler, M. C., Schwar, H. E., Hoopes, J. A., and Diebel, M. W. (2005). “Monitoring channel morphology and bluff erosion at two installations of flow-deflecting vanes, North Fish Creek, Wisconsin, 2000–03,” Scientific Investigations Report 2004-5272, U.S. Department of the Interior, U.S. Geological Survey, Reston, Va.

Flokstra, C. (2006). “Modeling of submerged vanes,” J. Hydraul. Res., 44(5), 591–602.

Fukuoka, S. (1989). “Groins and vanes developed basing upon a new concept of bank protection,” Proc., Natl. Conf. on Hydraulic Engineering, ASCE, New Orleans, La., 224–229.

Fukuoka, S., and Watanabe, A. (1989). “New bank protection methods against erosion in the river,” Proc., Japan–China Joint Sem. on Natural Hazard Mitigation, Kyoto, Japan, 439–448.

Henderson, F. M. (1963). “Stability of alluvial channels,” Trans. Am. Soc. Civ. Eng., 128(Part I), 657.

Ikeda, S., and Nishimura, T. (1985). “Bed topography in bends of sand-silt rivers,” J. Hydraul. Eng., 111(11), 1397–1411.

Jain, S. C., Kundert, M., and Goss, J. (1994). “Field survey of the Rock River. Commonwealth Edison Byron Nuclear Power Station,” IIHR LD Report No. 225, The University of Iowa, Iowa City, Iowa.

Jansen, P. Ph., van Bendegom, L., van den Berg, J., de Vries, M., and Zanen, A. (1979). Principles of river engineering, Pitman Publishing Ltd., London, U.K.

Keller, R. J. (1993). “Huntly heat rejection project. Stabilization of river bed,” Electricity Corporation of New Zealand, Ltd., Huntly Power Station, Huntly Thermal Group, Huntly, New Zealand.

Lamb, H. (1932). Hydrodynamics, 6th ed., Cambridge University Press, Cambridge, U.K.

Lane, E. W. (1957). “A study of the shape of channels formed by natural streams flowing in erodible material,” M.R.D. Sediment Series Report No. 9, U.S. Army Engineer Division, Missouri River, Corps of Engineers, Omaha, Nebraska.

Leopold, L. B., and Wolman, M. G. (1957). “River channel patterns—braided, meandering and straight,” U.S. Geological Survey Professional Paper 282B, U.S. Geological Survey, Washington, D.C.

Leopold, L. B., and Wolman, M. G. (1960). “River meanders,” Bull. Geolog. Soc. Am., 71, 769–794.

Marelius, F. (2001). “Vane applications and vane induced flow,” thesis presented to the Royal Institute of Technology, at Stockholm, Sweden, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.

Melville, B. W., Odgaard, A. J., Wang, Y., and Sinha, S. K. (1992). “Hydraulic model study of sediment management alternatives. Commonwealth Edison Byron Station River Water Intake Structure,” IIHR Limited Distribution Report No. 198, The University of Iowa, Iowa City, Iowa.

Michell, F., Ettema, R., and Muste, M. (2006). “Case study: Sediment control at water intake for large thermal-power station on a small river,” J. Hydraul. Eng., 132(5), 440–449.

Milne-Thomson, L. M. (1966). Theoretical aerodynamics, Dover Publications, Inc., New York, N.Y.

Muste, M., and Ettema, R. (2000). “River-sediment control at Conesville Power Station, on the Muskingum River, Ohio,” Report No. 410, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.

Nakato, T., Kennedy, J. F., and Bauerly, D. (1990). “Pump-station intake-shoaling control with submerged vanes,” J. Hydraul. Eng., 116(1), 110–128.

Nakato, T., and Ogden, F. L. (1998). “Sediment control at water intakes along sand-bed rivers,” J. Hydraul. Eng., 124(6), 589–596.

Neary, V. S., Sotiropoulos, F., and Odgaard, A. J. (1999). “Three-dimensional numerical model of lateral-intake flows,” J. Hydraul. Eng., 125(2), 126–140.

Odgaard, A. J. (1987). “Streambank erosion along two rivers in Iowa,” Water Resour. Res., 23(7), 1225–1236.

Odgaard, A. J. (1989a). “River-meander model. I: Development,” J. Hydraul. Eng., 115(11), 1433–1450.

Odgaard, A. J. (1989b). “River-meander model. II: Applications,” J. Hydraul. Eng., 115(11), 1451–1464.

Odgaard, A. J. (2008). “Stability analysis in stream restoration,” World Environmental and Water Resources Congress 2008 Ahupua’a, ASCE/EWRI, Honolulu, Hawaii, May 12–16.

Odgaard, A. J., and Abad, J. D. (2007). “River meandering and channel stability.” Sedimentation engineering: Processes, measurements, modeling, and practice,” Garcia M., ed., ASCE Manuals and Reports on Engineering Practice No. 110, ASCE, Reston, Va.

Odgaard, A. J., and DeWitt, R. J. (1989). “Sediment control by submerged vanes,” Proc., 20th Annual Conf., Intl. Erosion Control Assoc., Vancouver, British Columbia, Canada.

Odgaard, A. J., and Kennedy, J. F. (1983). “River-bend bank protection by submerged vanes,” J. Hydraul. Eng., 109(8), 1161–1173.

Odgaard, A. J., and Lee, H. Y. E. (1984). “Submerged vanes for flow control and bank protection in streams,” IIHR Report No. 279, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.

Odgaard, A. J., and Mosconi, C. E. (1987). “Streambank protection by submerged vanes,” J. Hydraul. Eng., 113(4), 520–536.

Odgaard, A. J., and Spoljaric, A. (1986). “Sediment control by submerged vanes,” J. Hydraul. Eng., 112(12), 1164–1181.

Odgaard, A. J., and Spoljaric, A. (1989). “Sediment control by submerged vanes. Design basis,” in “River meandering,” Ikeda S. and Parker G., eds., Water Resources Monograph No. 12, American Geophysical Union, Washington, D.C., 127–151.

Odgaard, A. J., and Wang, Y. (1990). “Sediment control in bridge waterways,” Report No. 336, Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.

Odgaard, A. J., and Wang, Y. (1991). “Sediment management with submerged vanes. I: Theory,” J. Hydraul. Eng., 117(3), 267–283.

Odgaard, A. J., and Wang, Y. (1991). “Sediment management with submerged vanes. II: Applications,” J. Hydraul. Eng., 117(3), 284–302.

Odgaard, A. J., Wang, Y., and Neary, V. S. (1990). “Hydraulic-laboratory model study of river intake at Duane Arnold Energy Center,” IIHR Limited Distribution Report No. 177, The University of Iowa, Iowa City, Iowa.

Odgaard, A. J., Abdel-Fattah, S., Ali, A. M., El Ghorab, E. A. S., and Alsaffar, A. (2006). “Sediment management at a water intake on the Nile River, Egypt,” Conf. Proc., An International Perspective on Environmental and Water Resources, ASCE/EWRI, New Delhi, India, December 18–20.

Ouyang, H., Weber, L., and Odgaard, A. J. (2006). “Design optimization of a two-dimensional hydrofoil by applying a genetic algorithm,” Eng. Optimization, 38(5), 529–540.

Pauley, W. R., and Eaton, J. K. (1987). “Experiments on the development of longitudinal vortex pairs in a turbulent boundary layer,” AIAA J., 26(7), 816–823.

Petersen, M. S. (1986). River engineering, Prentice-Hall, Englewood Cliffs, N.J.

Potapov, M. V., and Pyshkin, B. A. (1947). “Metod poperechnoy tsirkulyatsii i ego prime-nenie v gidrotekhnike” [“The regulation of water streams with the method of artificial cross circulation”], Izd. Ak. Nayk. SSSR, Publishing House of the Academy of Sciences of the USSR, Moscow, Leningrad, the Soviet Union (in Russian).

Raudkivi, A. J., and Ettema, R. (1985). “Scour at cylindrical bridge piers in armored beds,” J. Hydraul. Eng., 111(4), 713–731.

Sabersky, R. H., and Acosta, A. J. (1964). “Fluid flow,” MacMillan Publishing Co., New York, N.Y.

Spoljaric, A. (1988). “Mechanics of submerged vanes on flat boundaries,” thesis presented to the University of Iowa, at Iowa City, Iowa, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.

U.S. Army Corps of Engineers. (1979). “Des Moines river bank erosion study, Iowa and Missouri, Stage 2,” Final Feasibility Report, Rock Island District, U.S. Corps of Engineers, Rock Island, Ill.

U.S. Army Corps of Engineers. (2008). “River engineering basics”, St. Louis District Applied River Engineering Center, <http://www.mvs.usace.army.mil/engcon/expertise/arec/basics_elements.html>

U.S. Department of the Interior. (1995–2000). “Water resources data for Iowa,” U.S. Geological Survey Water Data Reports, Water Resources Division, U.S. Geological Survey, U.S. Department of the Interior, Washington, D.C.

van Zwol, J. A. (2004). “Design aspects of submerged vanes,” thesis presented to Delft University of Technology, at Delft, The Netherlands, in partial fulfillment of the requirements for the degree of Master of Science.

Voisin, A., and Townsend, R. D. (2002). “Model testing of submerged vanes in strongly curved narrow channel bends,” Can. J. Civ. Eng., 29, 37–49.

Wang, Y. (1989). “Bank protection with submerged vanes,” Proc., XXIII Cong., Intl. Assoc. for Hydraulic Research, Vol. S, 17–23.

Wang, Y. (1990). “Sediment control with submerged vanes,” thesis presented to the University of Iowa, at Iowa City, Iowa, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.

Wang, Y., and Odgaard, A. J. (1993). “Flow control with vorticity,” J. Hydraul. Res., 31(4), 549–562.

Wang, Y., Odgaard, A. J., Melville, B. W., and Jain, S. C. (1996). “Sediment control at water intakes,” J. Hydraul. Eng., 122(6), 353–356.

Ward, J. V., Tockner, K., Uehlinger, U., and Malard, F. (2001). “Understanding natural patterns and processes in river corridors as the basis for effective river restoration,” Regulated Rivers: Research & Management, 17(4–5), 311–323.

Zeller, J. (1967). “Meandering channels in Switzerland,” Proc. Symp. on River Morphology, Intl. Assoc. of Scientific Hydrology, Bern, Switzerland, 75, 174–186.

Zimmermann, C., and Kennedy, J. F. (1978). “Transverse bed slopes in curved alluvial streams,” J. Hydr. Div., 104(1), 33–48.