Chapter 23
Development and Application of Numerical Models of Sediment Transport Associated with Dam Removal
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Brownlie, W. R. (1982). “Prediction of flow depth and sediment discharge in open channels.” PhD thesis, California Institute of Technology, Pasadena, Calif.
Bureau of Reclamation. (1996a). “Removal of Elwha and Glines Canyon Dams.” Elwha Technical Series PN-95-7, Elwha River Ecosystem and Fisheries Restoration Project, Washington, Pacific Northwest Region, Boise, Idaho, <http://ww.nps.gov/olym/elwha/reclamation/removal.htm>(accessed on Sept. 26, 2005).
Bureau of Reclamation. (1996b). “Sediment analysis and modeling of the river erosion alternative.” Elwha Technical Series PN-95-9, Elwha River Ecosystem and Fisheries Restoration Project, Washington, Pacific Northwest Region, Boise, Idaho, <http://ww.nps.gov/olym/elwha/reclamation/sediment.tm>(accessed on Sept. 26, 2005).
Chaudhry, M. H. (1993). Open-channel flow. Prentice-Hall, Englewood Cliffs, N.J.
Childers, D., Kresch, D. L., Gustafson, S. A., Randle, T. J., Melena, J. T., and Cluer, B. (2000). “Hydrologic data collected during the 1994 Lake Mills drawdown experiment, Elwha River, Washington.” Water-Resources Investigations Report 99-4215, U.S. Geological Survey, Tacoma, Wash.
Collins, B. D., and Dunne, T. (1989). “Gravel transport, gravel harvesting, and channel-bed degradation in rivers draining the southern Olympic Mountains, Washington, USA.” Environmental Geology and Water Sciences, 13, 213–224.
Cui, Y., Braudrick, C., Dietrich, W. E., Cluer, B., and Parker, G. (2006a). “Dam Removal Express Assessment Models (DREAM). 2: Sample runs / sensitivity tests.” Journal of Hydraulic Research, 44 (3), 291–307.
Cui, Y., and Parker, G. (1997). “A quasi-normal simulation of aggradation and downstream fining with shock fitting.” International Journal of Sediment Research, 12(2), 68–82.
Cui, Y., and Parker, G. (1998). “The arrested gravel front: Stable gravel-sand transitions in rivers. II: General numerical solution.” Journal of Hydraulic Research 36(2), 159–182.
Cui, Y., and Parker, G. (2005). “Numerical model of sediment pulses and sediment supply disturbances in mountain rivers.” Journal of Hydraulic Engineering, 131(8), 646–656. (2005)131:8(646).
Cui, Y., Parker, G., Braudrick, C., Dietrich, W. E., and Cluer, B. (2006b). “Dam Removal Express Assessment Models (DREAM). 1: Model development and validation.” Journal of Hydraulic Research, 44 (3), 308–323.
Cui, Y., Parker, G., Pizzuto, J., and Lisle, T. E. (2003). “Sediment pulses in mountain rivers. 2: Comparison between experiments and numerical predictions.” Water Resources Research, 39(9), 1240.
Curtiss, D. A. (1975). “Sediment yields of streams in the Umpqua River basin, Oregon.” Open-File Report, U.S. Geological Survey, Portland, Ore.
Dietrich, W. E. (1982). “Settling velocities of natural particles.” Water Resources Research, 18(6), 1615–1626.
Dietrich, W. E., Day, G., and Parker, G. (1999). “The Fly River, Papua New Guinea: Inferences about river dynamics, floodplain sedimentation and fate of sediment.” Varieties of fluvial form, Miller A.J. and Gupta A., eds., Wiley, New York.
Doyle, M. W., Stanley, E. H., and Harbor, J. M. (2003). “Channel adjustments following two dam removals in Wisconsin.” Water Resources Research, 39(1), 1011.
Graf, W. L. (1996). “Geomorphology and policy for restoration of impounded American rivers: What is natural?” The scientific nature of geomorphology: Proceedings of the 27th Binghamton symposium in geomorphology, Rhoads B.L. and Thorn C.E., eds., Wiley,New York, 443–473.
Hansler, M. E. (1999). “Sediment wave evolution and analysis of a one-dimensional sediment routing model, Navarro River, Northwestern California.” MS thesis, Humboldt State University, Arcata, Calif.
Keulegan, G. H. (1938). “Laws of turbulent flow in open channels.” Journal of the National Bureau of Standards, 21, Research Paper 1151, 707–741.
Larsen, K. R., and Sidle, R. C. (1980). “Erosion and sedimentation data catalog of the Pacific Northwest.” Rep. R6-WM-050-1981, U.S. Forest Service, Pacific Northwest Region, Portland, Ore.
McBain and Trush. (1998). “Tuolumne River corridor restoration plan, Stanislaus County, CA.” Draft report prepared for Tuolumne River Technical Advisory Committee (Don Pedro Project, FERC License No. 2299), McBain and Trush, Arcata, Calif.
Parker, G. (1990). “Surface-based bedload transport relation for gravel rivers.” Journal of Hydraulic Research, 28(4), 417–436.
Parker, G. (1991a). “Selective sorting and abrasion of river gravel. I: Theory.” Journal of Hydraulic Engineering, 117(2), 131–149.
Parker, G. (1991b). “Selective sorting and abrasion of river gravel. II: Application.” Journal of Hydraulic Engineering, 117(2), 150–171.
Pizzuto, J. (2002). “Effects of dam removal on river form and process.” BioScience, 52(8), 683–691.
Randle, T. (2003). “Dam removal and sediment management.” Dam removal research: Status and prospects, Graf W.L., ed., Heinz H.J. III Center for Science, Economics and the Environment, pp. 81–104.
Squier Associates. (2000). “Sandy River sediment study, Bull Run Hydroelectric Project.” Draft report prepared for Portland General Electric, Squier Associates, Lake Oswego, Ore.
Sternberg, H. (1875). Untersuchungen über Langen-und Querprofil geschiebeführende Flüsse. Zietschrift für Bauwesen, 25, 483–506.
Stillwater Sciences. (2000). “Evaluation of geomorphic effects of removal of Marmot and Little Sandy dams and potential impacts on anadromous salmonids.” Technical report prepared for Portland General Electric, Stillwater Sciences, Portland, Ore., <http://www.stillwatersci.com/whatwedo/sedtranspubs>(accessed on Sept. 26, 2005).
Stillwater Sciences. (2002). “Sediment transport modeling following the removal of Marmot Dam with 125,000 and 300,000 cubic yards of dredging prior to dam removal.” Technical Memorandum to Portland General Electric, Stillwater Science, Portland, Ore., <http://www.stillwatersci.com/whatwedo/sedtranspubs>(accessed on Sept. 26, 2005).
Swanson, F. J., and Dyrness, C. T. (1975). “Impact of clear-cutting and road construction on soil erosion by landslides in the western Cascade Range, Oregon.” Geology, 1, 393–396.
Swanson, F. J., Janda, R. J., and Dunne, T. (1982). “Summary: sediment budget and routing studies.” Workshop on sediment budgets and routing in forested drainage basins: Proceedings, Swanson F.J., Janda R.J., Dunne T., and Swanston D.N., eds., General Technical Report PNW-141, U.S. Forest Service, Pacific Northwest Forest and Range Experiment Station, Portland, Ore., pp. 157–165.
Toro-Escobar, C. M., Parker, G., and Paola, C. (1996). “Transfer function for the deposition of poorly sorted gravel in response to streambed aggradation.” Journal of Hydraulic Research, 34(1), 35–54.
U.S. Army Corps of Engineers (USACE). (1993). “HEC-6: Scour and deposition in rivers and reservoirs.” User’s Manual, Hydrologic Engineering Center, <http://www.hec.usace.army.mil/software/legacysoftware/hec6/hec6-documentation.htm>(Sept. 26, 2005).
Van Rijn, L. C. (1984). “Sediment transport. II: Suspended load transport.” Journal of Hydraulic Engineering, 110(11), 1613–1641.
Wilcock, P. R., and Crowe, J. C. (2003). “A surface-based transport model for sand and gravel.” Journal of Hydraulic Engineering, 129(2), 120–128.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 995 - 1020
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.