Chapter 15
Two- and Three-Dimensional Numerical Simulation of Mobile-Bed Hydrodynamics and Sedimentation
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ashida, K., and Okabe, T. (1982). “On the calculation method of the concentration of suspended sediment under non-equilibrium condition.” Proc. 26th Conference on Hydraulics, Japan Society of Civil Engineers, Tokyo, 153–158 (in Japanese).
Bennett, J. P., and Nordin, C. F. (1977). “Simulation of sediment transport and armoring.” Hydrological Sciences Bulletin, XXII, 4(12), 555–569.
Benqué, J. P., Cunge, J. A., Feuillet, A., Haguel, A., and Holly, F. M., Jr. (1982). “New method for computation of tidal currents.” Journal of the Waterways and Harbors Division, ASCE, 108(WW3), 396–417.
Borah, D. K., Alonso, C. V., and Prasad, S. H. (1982). “Routing graded sediments in streams: formulations.” Journal of the Hydraulics Division, ASCE, 108(HY12), 1486–1505.
Brors, B. (1999). “Numerical modeling of flow and scour at pipelines.” Journal of Hydraulic Engineering, ASCE, 125(5), 511–523.
Cao, Z. X., Wei, L. Y., and Xie, J. H. (1995). “Sediment-laden flow in open channels from two phase flow viewpoints.” Journal of Hydraulic Engineering, ASCE, 121(10), 725–735.
Catalyst-Old River Hydroelectric Limited Partnership d.b.a. Louisiana Hydroelectric Limited Partnership. (1999). Lower Mississippi River Sediment Study, Louisiana Hydroelectric Limited Partnership, Vidalia, La.
Celik, I., and Rodi, W. (1984). “A deposition-entrainment model for suspended sediment transport.” Report. SFB 210/T/6, University of Karlsruhe, Karlsruhe, Germany.
Celik, I., and Rodi, W. (1988). “Modeling suspended sediment transport in nonequilibrium situations.” Journal of Hydraulic Engineering, ASCE, 114(10), 1157–1191.
Chapman, R. S., and Johnson, B. H. (1996). User’s guide for the sigma stretched version of CH3D-WES—A three-dimensional hydrodynamic, salinity, and temperature model, Hydraulics Laboratory, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
Crowe, C. T., Troutt, T. R., and Chung, J. N. (1996). “Numerical models for two-phase turbulent flows.” Annual Review of Fluid Mechanics, 28, 11–43.
Damgaard, J. S., Whitehouse, R. J. S., and Soulsby, R. L. (1997). “Bed-load sediment transport on steep longitudinal slopes.” Journal of Hydraulic Engineering, ASCE, 123(12), 1130–1138.
Demuren, A. O. (1991). “Development of a mathematical model for sediment transport in meandering rivers.” Bericht No. 693, Institut fur Hydromechanik an der Universität Karlsruhe, Karlsruhe, Germany.
Drew, D. A. (1983). “Mathematical modeling of two-phase flow.” Annual Review of Fluid Mechanics, 15, 261–291.
Duan, J. G., Wang, S. S. Y., and Jia, Y. (2001). “The applications of the enhanced CCHE2D model to study the alluvial channel migration process.” Journal of Hydraulic Research, 39(5), 469–480.
Elghobashi, S. E. (1994). “On predicting particle-laden turbulent flows.” Applied Science Research, 52, 309–329.
Fagerburg, T. L. (1998). “Discharge and velocity measurements on the Mississippi River at the Old River Control Structure Complex.” Progress Report, Lower Mississippi River Sediment Study, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
Fang, H. W. (2000). “Three-dimensional calculations of flow and bed-load transport in the Elbe River.” Report No. 763, Institut fur Hydromechanik an der Universität Karlsruhe, Karlsruhe, Germany.
Fang, H. W., and Rodi, W. (2000). “Three-dimensional calculations of flow and suspended sediment transport in the neighborhood of the dam for the Three Gorges Project (TGP) Reservoir in the Yangtze River.” Report No. 762, Institut fur Hydromechanik an der Universität Karlsruhe, Karlsruhe, Germany.
Fennema, R. J., and Chaudhry, M. H. (1990). “Numerical solution of two-dimensional transient free-surface flows.” Journal of Hydraulic Engineering, ASCE, 116(8), 1013–1034.
Ferziger, J. H., and Peric, M. (2002). Computational methods for fluid dynamics, 3rd Ed., Springer, New York.
Fletcher, C. A. J. (1991). Computational techniques for fluid dynamics, Vol. I, Springer, Berlin.
Flokstra, C. (1977). “The closure problem for depth-averaged two-dimensional flow.” Publication No. 190, Waterloopkundig Laboratorium, Delft Hydraulics Laboratory, Delft, The Netherlands.
Gessler, D., Hall, B., Spasojevic, M., Holly, F. M., Pourtaheri, H., and Raphelt, N. K. (1999). “Application of 3-dimensional mobile bed, hydrodynamics model.” Journal of Hydraulic Engineering, ASCE, 125(7), 737–749.
Greimann, B. P., Muste, M., and Holly, F. M., Jr. (1999). “Two-phase formulation of suspended sediment transport.” Journal of Hydraulic Research, 37(4), 479–500.
Hervouet, J.-M., and Bates, P., eds. (2000). “The Telemac modelling system.” Special Issue, Hydrological Processes, 14(13).
Hirsch, C. (1991). Numerical computation of internal and external flows, Vols. I and II, Wiley, New York.
Holly, F. M., Jr., and Rahuel, J. L. (1990). “New numerical/physical framework for mobile-bed modelling. I: Numerical and physical principles.” Journal of Hydraulic Research, 27(4), 401–416.
Holly, F. M., Jr., and Spasojevic, M. (1999). “Three-dimensional mobile-bed modeling of the Old River Complex, Mississippi River,” Proc. XXVIIIth IAHR Congress, Graz, Austria.
Holly, F. M., Jr., and Usseglio-Polatera, J. M. (1984). “Dispersion simulation in two-dimensional tidal flow.” Journal of Hydraulic Engineering, ASCE, 110(7), 905–926.
Ishii, M. (1975). Thermo-fluid dynamic theory of two-phase flow. Eyrolles, Paris.
Jankowski, J. A., Malcherek, A., and Zielke, W. (1994) “Numerical modeling of sediment transport processes caused by deep sea mining discharges.” Proceedings of the OCEANS 94 Conference, Brest, Vol. III, IEEE/SEE, Piscataway, N.J., 269–276.
Jia, Y., Kitamura, T., and Wang, S. S. Y. (2001). “Simulation of scour process in plunging pool of loose bed-material.” Journal of Hydraulic Engineering, ASCE, 127(3), 219–229.
Jia, Y., and Wang, S. S. Y. (1999). “Numerical model for channel flow and morphological change studies.” Journal of Hydraulic Engineering, ASCE, 125(9), 737–749.
Jin, Y. C., and Steffler, P. M. (1993). “Predicting flow in curved channels by depth-averaged method.” Journal of Hydraulic Engineering, ASCE, 119(1), 109–124.
Jobson, H. E., and Sayre, W. W. (1970). “Vertical transfer in open channel flow.” Journal of Hydraulic Engineering, ASCE, 96(HY3), 703–724.
Karim, F., and Kennedy, J. F. (1982). “IALLUVIAL: A computer-based flow and sediment-routing model for alluvial streams and its application to the Missouri River.” Technical Report No. 250, Iowa Institute of Hydraulic Research, University of Iowa, Iowa City, Iowa.
Kitamura, T., Jia, Y., Tsujimoto, T., and Wang, S. S. Y. (1998). “Sediment transport capability in channels with vegetation zone.” Advances in Hydro-Science and Engineering (CR-ROM), Vol. III, Holz K.P., Bechteler W., Wang S.S.Y., and Kawahara M., eds., Center for Computational Hydroscience and Engineering, University of Mississippi, University, Miss.
Kovacs, A., and Parker, G. (1994). “A new vectorial bedload formulation and its application to the time evolution of straight river channels.” Journal of Fluid Mechanics, 267, 153–183.
Lau, Y. L., and Engel, P. (1999). “Inception of sediment transport on steep slopes.” Journal of Hydraulic Engineering, ASCE, 125(5), 544–547.
Leonard, B. P. (1979). “A stable and accurate convective modelling procedure based on quadratic upstream interpolation.” Computer Methods in Applied Mechanics and Engineering, 19, 59–98.
Lin, B., and Falconer R. A. (1996). “Numerical modeling of three-dimensional suspended sediment for estuarine and coastal waters.” Journal of Hydraulic Research, 34(4), 435–456.
Liu, Q., Chen, L., and Liu, D. (1997). “Effects of existence of sediment particles on the energy loss of flow.” International Journal of Sediment Research, 11(3), 18–24.
Minh Duc, B., Wenka, Th., and Rodi, W. (1998). “Depth-average numerical modeling of flow and sediment transport in the Elbe River.” Proc. 3rd Int. Conf. on Hydroscience and Engineering, Brandenburg University of Technology, Cottbus, Germany.
Morlock, S. E., Nguyen, H. T., and Ross, J. H. (2002). “Feasibility of acoustic Doppler Velocity meters for the production of discharge records from U.S. Geological Survey streamflow-gaging stations.” Water-Resources Investigations Report 01-4157, U.S. Geological Survey, Indianapolis, Ind.
Muste, M., Yu, K., and Spasojevic, M. (2004a). “Practical aspects of ADCP data use for quantification of mean river flow characteristics. Part I: Moving-vessel measurements.” Flow Measurements and Instrumentation, 15(1), 1–16.
Muste, M., Yu, K., Pratt, T., and Abraham, D. (2004b). “Practical aspects of ADCP data use for quantification of mean river flow characteristics. Part II: Fixed-vessel measurements.” Flow Measurements and Instrumentation, 15(1), 17–28.
Nagata, N., Hosoda, T., and Muramoto, Y. (2000). “Numerical analysis of river channel processes with bank erosion.” Journal of Hydraulic Engineering, ASCE, 126(4), 243–252.
Nakagawa, H., and Tsujimoto, T. (1980). “Sand bed instability due to bed load motion.” Journal of the Hydraulics Division, ASCE, 106(HY12), 2029–2951.
Ni, H. Q., Huang, Z. C., Zhou, L. X., and Zhou, J. Y. (1996). “Numerical simulation of sedimentation using a two-fluid model of turbulent liquid solid flows.” Flow Modeling and Turbulence Measurements VI, Balkema, Rotterdam, The Netherlands, 781–788.
Nordin, C. F., and Queen, B. S. (1989). “Particle size distributions of bed sediment along the thalweg of the Mississippi River, Cairo, Illinois to Head of Passes, September 1989.” Report 7, Potamology Program (P-1), submitted to U.S. Army Corps of Engineers, Lower Mississippi Valley Division, Vicksburg, Miss.
Olsen, N. R. B. (1999). “Two-dimensional numerical modeling of flushing processes in water reservoirs.” Journal of Hydraulic Research, 37(1), 3–16.
Olsen, N. R. B., Jimenez, O., Lovoll, A., and Abrahamsen, L. (1999). “3D CFD modeling of water and sediment flow in hydropower reservoir.” International Journal of Sediment Research, 14(1), 16–24.
Olsen, N. R. B., and Kjellesvig, H. M. (1998). “Three-dimensional numerical flow modeling for maximum local scour depth.” Journal of Hydraulic Research, 36(4), 579–597.
Olsen, N. R. B., and Melaaen, M. C. (1993). “Three-dimensional calculation of scour around cylinders.” Journal of Hydraulic Engineering, ASCE, 119(9), 1048–1054.
Olsen, N. R. B., and Skoglund, M. (1994). “Three-dimensional numerical modeling of water and sediment flow in a sand trap,” Journal of Hydraulic Research, IAHR, 32(6), 833–844.
Onishi, Y., and Thompson, F. L. (1984). “Mathematical simulation of sediment and radionuclide transport in coastal waters.” Report No. 5088-1, Vol. 1, Pacific Northwest Laboratory (PNL), Richland, Wash.
Onishi, Y., and Trent, D. S. (1982). “Mathematical simulation of sediment and radionuclide transport in estuaries.” Report No. 4109, Pacific Northwest Laboratory (PNL), Richland, Wash.
Onishi, Y., and Trent, D. S. (1985). “Three-dimensional simulation of flow, salinity, sediment, and radionuclide movement in the Hudson River estuary.” Proceedings, Specialty Conference: Hydraulics and Hydrology in Small Computer Age, ASCE, New York, 1095–1100.
Phillips, B. C., and Sutherland, A. J. (1989). “Spatial lag effects in bed load sediment transport.” Journal of Hydraulic Research, IAHR, 27(1), 115–133.
Rodi, W. (1993). Turbulence models and their application in hydraulics, 3rd Ed., Balkema, Rotterdam, The Netherlands.
Rodi, W. (2000). “Numerical calculation of flow and sediment transport in rivers.” Proc. Eighth Int. Symp. on Stochastic Hydraulics, Wang Z.-Y. and Hu S.-X., eds., A. A. Balkeema, Rotterdam, The Netherlands, 15–30.
Savic, Lj., and Holly, F. M., Jr. (1993). “Numerical modeling of reservoir sedimentation. MOBED2 program. Programmer’s and user’s manual.” Limited Distribution Report No. 204, Iowa Institute of Hydraulic Research, Univ. of Iowa, Iowa City, Iowa.
Shen, H. W., and Lu, J. Y. (1983). “Development and prediction of bed armoring.” Journal of Hydraulic Engineering, ASCE, 109(4), 611–629.
Sheng, Y. P. (1983). “Mathematical modeling of three-dimensional coastal currents and sediment dispersion: Model development and application.” A.R.A.P. Report No. 485; also as Technical Report CERC-83-2, Waterways Experimental Station, Vicksburg, Miss.
Shimizu, Y., Yamaguchi, H., and Itakura, T. (1990). “Three-dimensional computation of flow and bed deformation.” Journal of Hydraulic Engineering, ASCE, 116(9), 1090–1108.
Simmonds, J. G. (1994). A brief on tensor analysis. Springer, New York.
Spasojevic, M. (1988). “Numerical simulation of two-dimensional (plan-view) unsteady water and sediment movement in natural watercourses.” Ph.D. thesis, University of Iowa, Iowa City, Iowa.
Spasojevic, M., and Holly, F. M., Jr. (1990a). “MOBED2— Numerical simulation of two-dimensional mobile-bed processes.” Technical Report No. 344, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.
Spasojevic, M., and Holly, F. M., Jr. (1990b). “2-D bed evolution in natural watercourses—New simulation approach.” Journal of Waterway, Port, Coastal, and Ocean Engineering, ASCE, 116(4), 425–443.
Spasojevic, M., and Holly, F. M., Jr. (1993). “Three-dimensional numerical simulation of mobile-bed hydrodynamics.” Technical Report No. 367, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa; also as Contract Report HL- 94-2, Waterways Experimental Station, Vicksburg, Miss., 1994.
Spasojevic, M., and Muste, M. (2002). “Numerical model study of Berwick Harbor, Morgan City, Louisiana.” Technical Report No. 422, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.
Spasojevic, M., Muste, M., and Holly, F. M., Jr. (2001). “3-D modeling of the Missouri River at Leavenworth Bend.” Limited Distribution Report No. 298, Iowa Institute of Hydraulic Research, The University of Iowa, Iowa City, Iowa.
Thomas, W. A., and McAnally, W. H., Jr. (1985). “User’s manual for the generalized computer program system open-channel flow and sedimentation—TABS-2, main text.” Instruction Report HL-85-1, Waterways Experiment Station, U.S. Army Corps of Engineers, Vicksburg, Miss.
Thuc, T. (1991). “Two-dimensional morphological computations near hydraulic structures.” Ph.D. dissertation, Asian Institute of Technology, Bangkok, Thailand.
Usseglio-Polatera, J. M., and Cunge, J. A. (1985). “Modelling of pollutant and suspended-sediment transport with Argos Modelling System.” Proc. International Conference on Numerical and Hydraulic Modelling of Ports and Harbors, BHRA, Fluid Engineering Centre, Cranfield, U.K., 83–92.
van Rijn, L. C. (1984a). “Sediment transport. I: Bed load transport.” Journal of Hydraulic Engineering, ASCE, 110(10), 1431–1456.
van Rijn, L. C. (1984b). “Sediment transport. II: Suspended load transport.” Journal of Hydraulic Engineering, ASCE, 110(11), 1613–1641.
van Rijn, L. C. (1986). “Mathematical modeling of suspended sediment in nonuniform flow.” Journal of Hydraulic Engineering, ASCE, 112(6), 433–455.
van Rijn, L. C. (1987). “Mathematical modeling of morphological processes in the case of suspended sediment transport.” Delft Hydraulics Communication No. 382, Delft Hydraulics, Delft, The Netherlands.
Villaret, C., and Davies, A. C. (1995). “Modeling sediment-turbulent flow interactions.” Applied Mechanics Research, 48(9), 601–609.
Wang, S. S. Y., and Adeff, S. E. (1986). “Three-dimensional modeling of river sedimentation processes.” Proc., Third International Symposium on River Sedimentation, IRTCES, IWHR, Beijing, China.
Wellington, N. W. (1978). “A sediment-routing model for alluvial streams.” MEngSc dissertation, University of Melbourne, Australia.
Wu, W., Rodi, W., and Wenka, T. (2000). “3D numerical modeling of flow and sediment transport in open channels.” Journal of Hydraulic Engineering, ASCE, 126(1), 4–15.
Zaghloul, N. A., and McCorquodale, J. A. (1975). “A stable numerical model for local scour.” Journal of Hydraulic Engineering, ASCE, 13(4), 425–444.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 683 - 761
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.