Chapter 3
Transport of Gravel and Sediment Mixtures
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Aalto, R. (2002). “Geomorphic form and process of sediment flux within an active orogen: Denudation of the Bolivian Andes and sediment conveyance across the Beni foreland.” PhD thesis, University of Washington, Seattle.
Ackers, P., and White, W. R. (1973). “Sediment transport: A new approach and analysis.” Journal of Hydraulic Engineering, 99(11), 2041–2060.
Ackers, P., and White, W. R. (1980). “Bed material transport: A theory for total load and its verification.” Proceedings, International Symposium on River Sedimentation, International Research and Training Center on Erosion and Sedimentation, Beijing, China, 249–268.
Almedeij, J. H., and Diplas, P. (2003). “Bedload transport in gravel-bed streams with unimodal sediment.” Journal of Hydraulic Engineering, 129(11), 896–904.
Anderson, M. G., Walling, D. E., and Bates, P. D., eds. (1996) Floodplain Processes, Wiley, New York.
Andrews, E. D. (1983). “Entrainment of gravel from naturally sorted riverbed materials.” Geological Society of America Bulletin, 94, 1225–1231.
Andrews, E. D., and Erman, D. C. (1986). “Persistence in the size distribution of surficial bed material during an extreme snow-melt flood.” Water Resources Research, 22, 191–197.
Armanini, A. (1991/1992). “A new formulation for modeling the transport of non uniform sediment mixtures.” Excerpta, 6, 115–132.
Armanini, A. (1995). “Non-uniform sediment transport: dynamics of the active layer.” Journal of Hydraulic Research, 33(5), 611–622.
Ashida, K., Egashira, S., and Andou, N. (1984). “Origin and geometry of step-pool bed form.” Proceedings, 28th Annual Hydraulics Conference, Japan Society of Civil Engineering Tokyo, Japan, 743–749.
Ashida, K., Egashira, S., and Liu, B. (1991). “Numerical method on sediment sorting and bed variation in meander channels.” Proceedings, Annual Conference on Hydraulic Engineering, Japan Society for Civil Engineering Tokyo, Japan 35, 383–390.
Ashida, K., Egashira, S., and Takamura, Y. (1989). “Mechanism for grain sorting in movable beds.” Annuals, Disaster Prevention Research Institute, Kyoto University, Japan, 32(B-2), 517–526.
Ashida, K., and Michiue, M. (1971). “An investigation of river bed degradation downstream of a dam.” Proceedings, 14th Congress, International Association of Hydraulic Research, Société Hydrotechnique de France, Paris, Fornel, 3, 247–256.
Ashida, K., and Michiue, M. (1972). “Study on hydraulic resistance and bedload transport rate in alluvial streams.” Transactions, Japan Society of Civil Engineering, 206, 59–69 (in Japanese).
Ashworth, P. J., and Ferguson, R. I. (1989). “Size-selective entrainment of bed load in gravel bed streams.” Water Resources Research, 25, 627–634.
Ashworth, P. J., Ferguson, R. I., Ashmore, P. E., Paola, C., Powell, D. M., and Prestegaard, K. L. (1992). “Measurements in a braided river chute and lobe. 2: Sorting of bedload during entrainment, transport and deposition.” Water Resources Research, 28, 1887–1896.
Ashworth, P. J., Ferguson R. I., and Powell, M. D. (1991). “Bedload transport and sorting in braided channels.” Dynamics of gravel-bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, New York, 495–515.
Bakke, P. D., Baskedas, P. O., Dawdy, D. R., and Klingeman, P. C. (1999). “Calibrated Parker-Klingeman model for gravel transport.” Journal of Hydraulic Engineering, 125(6), 657–660.
Belleudy, Ph., and SOGREAH (2000). “Numerical simulation of sediment mixture deposition. 1: Analysis of a flume experiment.” Journal of Hydraulic Research, 38(6), 417–425.
Bezzola, G. R. (1992). “The effect of sediment transport during the 1987-flood in the Reuss River.” Proceedings, International Seminar on Grain Sorting, Ascona, Switzerland, Mitteilungen 117 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 331–344.
Blom, A. (2003). “A continuum vertical sorting model for rivers with non-uniform sediment and dunes.” Doctoral thesis, University of Twente, The Netherlands.
Blom, A., Kleinhans, M. (1999). “Non-uniform sediment in morphological equilibrium situations—Data report sand flume experiments 97/98.” Research Report CiT 99R-002/MICS-001, Civil Engineering and Management, Twente University, the Netherlands.
Blom, A., Parker, G., and Ribberink, J. S. (2001). “Vertical exchange of tracers and non-uniform sediment in dune situations.” Proceedings, 2nd IAHR Symposium on River, Coastal and Estuarine Morphodynamics, Ikeda S., ed., Hokkaido River Disaster Prevention Research Center, Sapporo, Japan.
Blom, A., and Ribberink, J. S. (1999). “Non-uniform sediment in rivers: Vertical sediment exchange between bed layers.” Proceedings, IAHR Symposium on River, Coastal and Estuarine Morphodynamics, Seminara G., ed., Università degli Studi di Genova, Italy, Springer, New York, 45–54.
Blom, A., Ribberink, J. S., and de Vriend, H. J. (2003). “Vertical sorting in bed forms: Flume experiments with a natural and a trimodal sediment mixture.” Water Resources Research, (39)2.
Borah, D. K., Alonso, C. V., and Prasad, S. N. (1982). “Routing graded sediment in streams: formulations.” Journal of Hydraulic Research, 108, 1486–1503.
Bradley, W. C. (1970). “Effect of weathering on abrasion of granitic gravel, Colorado River (Texas).” Geological Society of America Bulletin, 81, 61–80.
Bridge, J. S., and Bennett, S. J. (1992). “A model for the entrainment and transport of sediment grains of mixed sizes, shapes and densities.” Water Resources Research, 28(2), 337–363.
Bridge, J. S., and Jarvis, J. (1976). “Flow and sedimentary processes in the meandering river South Esk, Glen Cova, Scotland.” Earth Surface Processes, 1, 303–336.
Brownlie, W. R. (1981). “Prediction of flow depth and sediment discharge in open channels.” Report KH-R-43A, W. M. Keck Laboratory of Hydraulics and Water Resources, California Institute of Technology, Pasadena, Calif.
Brummer, C. J., and Montgomery, D. R. (2003). “Downstream coarsening in headwater channels.” Water Resources Research, 39(10), 1294–1307.
Buffington, J. M., and Montgomery, D. R. (1997). “A systematic analysis of eight decades of incipient motion studies, with specific reference to gravel-bedded rivers.” Water Resources Research, 33(8), 1993–2029.
Bunte, K., and Abt, S. T. (2001). “Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics and streambed monitoring.” General Technical Report RMRS-GTR-74, US Department of Agriculture, US Forest Service, Rocky Mountain Research Station, Fort Collins, Colo.
Bunte, K., Abt, S. R., and Potyondy, J. P. (2004). “Measurement of coarse gravel and cobble transport using portable bedload transport. Journal of Hydraulic Engineering, 130(9), 879–893.
Burrows, R. L., Emmett, W. W., and Parks, B. (1981). “Sediment transport in the Tanana River near Fairbanks, Alaska, 1977–1979.” Water Resources Investigation Report 81-20, U.S. Geological Survey, U.S. Government Printing Office, Washington, D.C.
Burrows, R. L., and Harrold, P. E. (1983). “Sediment transport in the Tanana River near Fairbanks, Alaska, 1980–1981.” Water Resources Investigation Report 83-4064, U.S. Geological Survey, U.S. Government Printing office, Washington, D.C.
Carling, P. A. (1989). “Bedload transport in two gravel-bedded streams.” Earth Surface Processes and Landforms, 14, 27–39.
Carling, P. A., and Reader, N. A. (1982). “Structure, composition and bulk properties of upland stream gravels.” Earth Surface Processes and Landforms, 7, 349–386.
Carson, M. A., and Griffiths, G. A. (1987). “Bedload transport in gravel channels.” Journal of Hydrology New Zealand, 26(1), 1–151.
Church, M., and Hassan, M. A. (1992). “Size and distance of travel of unconstrained clasts on a streambed.” Water Resources Research, 28, 299–303.
Church, M., Hassan, M. A., and Wolcott, J. F. (1998). “Stabilizing self-organized structures in gravel-bed stream channels: Field and experimental observations.” Water Resources Research, 34(11), 3169–3179.
Church, M., and Rood, K. (1983). “Catalogue of alluvial river data.” Report, Department of Geography, University of British Columbia, Vancouver, B. C., Canada.
Church, M., Wolcott, J. F., and Fletcher, W. K. (1991). “A test of equal mobility in fluvial sediment transport: Behavior of the sand fraction.” Water Resources Research, 27(11): 2941–2951.
Church, M. A., McLean, D. G., and Wolcott, J. F. (1987). “River bed gravels: Sampling and analysis.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, New York, 43–79.
Colombini, M., and Parker, G. (1995). “Longitudinal streaks.” Journal of Fluid Mechanics, 304, 161–183.
Copeland, R. R., and Thomas, W. A. (1992). “Dynamic sorting and armoring algorithm in tabs-1 numerical sedimentation model.” Proceedings, International Seminar on Grain Sorting, Ascona, Switzerland, Mitteilungen 117 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 359–368.
Cui, Y., et al. (2003a). “Sediment pulses in mountain rivers. 1: Experiments.” Water Resources Research, 39(9), 1239.
Cui, Y., and Parker, G. (1997). “A quasi-normal simulation of aggradation and downstream fining with shock fitting.” International Journal of Sediment Research, 12(2), 68–82.
Cui, Y., and Parker, G. (1998). “The arrested gravel front: Stable gravel-sand transitions in rivers. 2: General numerical solution.” Journal of Hydraulic Research, 36(2), 159–182.
Cui, Y., and Parker, G. (1999). “Sediment transport and deposition in the Ok Tedi-Fly River system, Papua New Guinea: Modeling of 1998–1999.” Report 7, Environment Department, Ok Tedi Mining Ltd., >http://cee.uiuc.edu/people/parkerg/_private/Reports/> (Aug. 13, 2005).
Cui, Y., and Parker, G. (in press). “Numerical model of sediment pulses and sediment supply disturbances in mountain rivers.” Journal of Hydraulic Engineering.
Cui, Y., Parker, G., and Paola, C. (1996). “Numerical simulation of aggradation and downstream fining.” Journal of Hydraulic Research, 34(2), 184–204.
Cui, Y., Parker, G., Pizzuto, J. E., and Lisle, T. E. (2003b). “Sediment pulses in mountain rivers. 2: Comparison between experiments and numerical predictions,” Water Resources Research, 39(9), 1240.
Cui, Y., and Wilcox, A. (in press). “Development and application of numerical modeling of sediment transport associated with dam removal.” ASCE Manual No. 54, Sedimentation Engineering, Appendix A.
Day, T. J. (1980). “A study of the transport of graded sediments.” Report IT 190, HRS Wallingford, Wallingford, U. K.
Deigaard, R. (1980). “Longitudinal and transverse sorting of grain sizes in alluvial rivers.” Series Paper 26, Institute of Hydrodynamics and Hydraulic Engineering, Technical University of Denmark, Lyngby, Denmark.
De Vries, M. (1965). “Considerations about non-steady bed-load transport in open channels.” Proceedings, 11th Congress, International Association for Hydraulic Research, Leningrad, International Association of Hydraulic Engineering and Research, Madrid Spain, 381–388.
Di Silvio, G. (1991). “Sediment exchange between stream and bottom: a four layer model.” Proceedings, International Seminar on Grain Sorting, Ascona, Switzerland, Mitteilungen Nr. 117 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 163–192.
Dietrich, W. E., Day, G., and Parker, G. (1999). “The Fly River, Papua New Guinea: Inferences about river dynamics, flood-plain sedimentation and fate of sediment.” Varieties of fluvial form, Miller A.J. and Gupta A., eds., Wiley, New York, 345–376.
Dietrich, W. E., Kirchner, J. W., Ikeda, H., and Iseya, F. (1989). “Sediment supply and the development of the coarse surface layer in gravel-bedded rivers.” Nature, 340, 215–217.
Dietrich, W. E., and Smith, J. D. (1984). “Bedload transport in a river meander.” Water Resources Research, 20(10), 1355–1380.
Dietrich, W. E., and Whiting, P. J. (1989). “Boundary shear stress and sediment transport in river meanders of sand and gravel.” Water Resources Monograph 12, River Meandering, American Geophysical Union, Washington, D.C., 1–50.
Dinehart, R. L. (1992). “Evolution of coarse-gravel bedforms, field measurements at flood stage.” Water Resources Research, 28(10), 2667–2689.
Diplas, P. (1987). “Bedload transport in gravel-bed streams.” Journal of Hydraulic Engineering, 113, 277–292.
Diplas, P., and Parker, G. (1992). “Deposition and removal of fines in gravel-bed streams.” Dynamics of gravel-bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, New York, 314–326.
Diplas, P., and Sutherland, A. J. (1988). “Sampling techniques for gravel sized sediments.” Journal of Hydraulic Engineering, 114(5), 484–501.
Duan, J. G., and Chen, L. (2003). “Sediment transport study in the Las Vegas Wash.” Technical Report, Division of Hydrologic Sciences, Desert Research Institute, Las Vegas, Nev.
Egashira, S., and Ashida, K. (1990). “Mechanism of armoring phenomena.” International Journal of Sediment Research, 5(1), 49–55.
Egiazaroff, I. V. (1965). “Calculation of non-uniform sediment concentrations.” Journal of Hydraulic Engineering, 91(4), 225–248.
Einstein, H. A. (1950). “The bed-load function for sediment transportation in open channel flows.” Technical Bulletin 1026, U.S. Dept. of the Army, Soil Conservation Service, U.S. Department of Agriculture, Washington, D.C.
Emmett, W. W. (1976). “Bedload transport in two large, gravel-bed rivers, Idaho and Washington.” Proceedings, Third Federal Inter-Agency Sedimentation Conference, Denver, Colorado, March 22–26. U.S. Government Printing Office, Washington, D.C.
Emmett, W. W., Myrick, R. H., and Meade, R. H. (1980). “Field data describing the movement and storage of sediment in the East Fork River, Wyoming. 1: River hydraulics and sediment transport.” Open-File Report 80-1189, U. S. Geological Survey, U.S. Government Printing Office, Washington, D.C.
Engelund, F., and Hansen, E. (1967). A monograph or sediment transport in alluvial streams. Teknisk Vorlag, Copenhagen.
Everts, C. H. (1973). “Particle overpassing on flat granular boundaries.” Journal of the Waterways and Harbors Division, 99, 425–438.
Ferguson, R., and Ashworth, P. (1991). “Slope-induced changes in the channel character along a gravel-bed stream: The Allt Dubhaig, Scotland.” Earth Surface Processes and Landforms, 16, 65–82.
Ferguson, R. I., Church, M., and Weatherley, H. (2001). “Fluvial aggradation in the Vedder River: Testing a one-dimensional sedimentation model,” Water Resources Research, 37(12), 3331–3348.
Ferguson, R., Hoey, T., Wathen, S., and Werrity, A. (1996). “Field evidence for rapid downstream fining of river gravels through selective transport.” Geology, 24(2), 179–182.
Ferguson, R. I., and Wathen, S. J. (1998). “Tracer-pebble movement along a concave river profile: Virtual velocity in relation to grain size and shear stress.” Water Resources Research, 34(8), 2031–2038.
Fernandez Luque, R., and van Beek, R. (1976). “Erosion and transport of bedload sediment.” Journal of Hydraulic Research, 14(2), 127–144.
Fripp, J. B., and Diplas, P. (1993). “Surface sampling in gravel streams.” Journal of Hydraulic Engineering, 119(4), 473–490.
Fujita, K., Yamamoto, K., and Akabori, Y. (1998). “Evolution mechanisms of the longitudinal bed profiles of major alluvial rivers in Japan and their implications for profile change prediction.” Transactions, Japan Society of Civil Engineering, 600(II-44), 37–50 (in Japanese).
Galay, V. J. (1983). “Causes of river bed degradation.” Water Resources Research, 19, 1057–1090.
García, M., and Parker, G. (1991). “Entrainment of bed sediment into suspension.” Journal of Hydraulic Engineering, 117(4), 414–435.
Gomez, B. (1983). “Temporal variations in bedload transport rates: The effect of progressive bed armoring.” Earth Surface Processes and Landforms, 8, 41–54.
Gomez, B., and Church, M. (1989). “An assessment of bed load sediment transport formulae for gravel bed rivers.” Water Resources Research, 25(6), 1161–1186.
Gomez, B., Naff, R. L., and Hubbell, D. W. (1989). “Temporal variations in bedload transport rates associated with the migration of bedforms.” Earth Surface Processes and Landforms, 14, 135–156.
Gomez, B., Rosser, B. J., Peacock, D. H., Hicks, D. M., and Palmer, J. A. (2001). “Downstream fining in a rapidly aggrading gravel bed river.” Water Resources Research, 37(6), 1813–1824.
Grant, G. E., Swanson, F. J., and Wolman, M. G. (1990). “Pattern and origin of stepped-bed morphology in high-gradient streams, Western Cascades, Oregon.” Geological Society of America Bulletin, 102, 340–352.
Günter, A. (1971). “Die kritische mittlere Sohlenschubspannung bei Gescheibemischungen unter Berücksichtigung der Deckschichtbildung und der turbulenzbedingten Sohlensc hubspannungsschwankungen,” Mitt. 3, Versuchsanstalt für Wasserbau, ETH Zurich, Zurich, Switzerland.
Hamamori, A. (1962). “A theoretical investigation on the fluctuations of bedload transport.” Report R4, Delft Hydraulics Laboratory, Delft, The Netherlands.
Haschenburger, J. K. (1999). “A probability model of scour and fill depths in gravel-bed channels.” Water Resources Research, 35(9), 2857–2869.
Haschenburger, J. K., and Church, M. (1998). “Bed material transport estimated from the virtual velocity of sediment.” Earth Surface Processes and Landforms, 23, 791–808.
Hasegawa, K, Fujita, T., Meguro, H., and Tatuzawa, H. (2000). “Bed forms in steep channels with heterogeneous bed materials induced by bottom elevation instability and sorting instability.” Suikougaku Ronbunshuu, 44, 659–664 (in Japanese).
Hassan, M. A. (1990). “Scour, fill and burial depth of coarse material in gravel bed streams.” Earth Surface Processes and Landforms, 15, 341–356.
Hassan, M. A., and Church, M. (1994). “Vertical mixing of coarse particles in gravel bed rivers: A kinematic model.” Water Resources Research, 30, 1173–1185.
Hassan, M. A., and Church, M. (2000). “Experiments on surface structure and partial sediment transport on a gravel bed.” Water Resources Research, 36(7), 1885–1985.
Hassan, M. A., and Church, M. (2001). “Sensitivity of bed load transport in Harris Creek: Seasonal and spatial variation over a cobble-gravel bar.” Water Resources Research, 37, 813–825.
Hassan, M. A., Church, M., and Ashworth, P. J. (1992). “Virtual rate and mean distance of travel of individual clasts in gravel-bed channels.” Earth Surface Processes and Landforms, 17, 617–627.
Hassan. M. A., and Egozi, R. (2001). “Impact of wastewater on the channel morphology of ephemeral streams.” Earth Surface Processes and Landforms, 26(12), 1285–1302.
Hay, D. F., ed. (1998). Wetlands engineering river restoration conference 1998, engineering approaches to ecosystem restoration (CD-ROM), ASCE, Reston, Va.
Hayward, J. A. (1980). “Hydrology and stream sediment From Torlesse stream catchment.” Special Publication 17, Tussock Grasslands and Mountain Lands Institute, Lincoln College, Canterbury, New Zealand.
Hey, R. (1989). “Bar form resistance in gravel-bed rivers.” Journal of Hydraulic Engineering, 114(12), 1498–1508.
Hey, R. D. (1979). “Flow resistance in gravel-bed rivers.” Journal of Hydraulic Engineering, 105(4), 365–380.
Hirano, M. (1971). “On riverbed variation with armoring.” Proceedings, Japan Society of Civil Engineering, 195, 55–65 (in Japanese).
Hoey, T. B., and Ferguson, R. (1997). “Controls of strength and rate of downstream fining about a river base level.” Water Resources Research, 33(11), 2601–2608.
Hoey, T. B., and Ferguson, R. I. (1994). “Numerical simulation of downstream fining by selective transport in gravel bed rivers: Model development and illustration.” Water Resources Research, 30, 2251–2260.
Hollingshead, A. B. (1971). “Sediment transport measurements in a gravel river.” Journal of Hydraulic Engineering, 97(11), 1817–1834.
Holly, F. M., and Rahuel, J. L. (1990). “New numerical/physical framework for mobile-bed modeling.” Journal of Hydraulic Research, 28(5), 545–564.
Hooke, R. LeB. (1968). “Laboratory study of the influence of granules on flow over a sand bed.” Geological Society of America Bulletin, 79, 495–500.
Hotchkiss, R. H., and Glade, M., eds. (2000). “Symposium on river restoration,” Proceedings, 2000 Joint Conference on Water Resources Engineering and Water Resources Planning and Management (CD-ROM), ASCE.
Huang, X., and García, M. H. (2000). “Pollution of gravel spawning grounds by deposition of suspended sediment.” Journal of Environmental Engineering, 126(10), 963–965.
Hubbell, D. W. (1987). “Bedload sampling and analysis.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, New York, 89–106.
Hunziker, R., and Jaeggi, M. N. R. (2002). “Grain sorting processes.” Journal of Hydraulic Engineering, 128(12), 1060–1068.
Ikeda, H. (2001). An eye for seeing landforms, Kokon Shoin, Tokyo, Japan (in Japanese).
Ikeda, S. (1982). “Incipient motion of sand particles on side slopes.” Journal of Hydraulic Engineering, 108, 95–114.
Ikeda, S. (1989). “Sediment transport and sorting at bends.” Water Resources Monograph 12, River Meandering, American Geophysical Union, Washington, D.C., 103–126.
Ikeda, S., Yamasaka, M., and Chiyoda, M. (1987). “Bed topography and sorting in bends.” Journal of Hydraulic Engineering, 113(2), 190–205.
Iseya, F., and Ikeda, H. (1987). “Pulsations in bedload transport induced by a longitudinal sediment sorting: A flume study using sand gravel mixtures.” Geografiska Annaler, 69, 15–27.
Kamphuis, J. W. (1974). “Determination of sand roughness for fixed beds.” Journal of Hydraulic Research, 12(2), 193–202.
Keulegan, G. H. (1938). “Laws of turbulent flow in open channels.” Research Paper RP 1151, National Bureau of Standards, Washington, D.C.
Karim, F. (1998). “Bed material discharge prediction for nonuniform bed sediments.” Journal of Hydraulic Engineering, 124(6), 597–604.
Karim, F., and Kennedy, J. F. (1981). “Computer-based predictors for sediment discharge and friction factor of alluvial streams.” Report 242, Iowa Institute of Hydraulic Research, University of Iowa, Iowa City, Iowa.
Kellerhals, R., and Bray, D. I. (1971). “Sampling procedures for coarse fluvial sediments.” Journal of Hydraulic Engineering, 98(8), 1165–1180.
Kellerhals, T., and Gill, D. (1973). “Observed and potential downstream effects of large storage projects in northern Canada.” Proceedings, 12th Congress, International Commission on Large Dams, Madrid, 731–754.
Kellerhals, R., Neill, C. R., and Bray, D. I. (1972). “Hydraulic and geomorphic characteristics of rivers in Alberta.” River Engineering and Surface Hydrology Report 72-1, Research Council of Alberta, Edmonton, Alta., Canada.
Kelsey, A. R. (1996). “Modelling the sediment transport process.” Advances in fluvial dynamics and stratigraphy, Carling P.A. and Dawson M.R., eds., Wiley, New York, 229–262.
Kleinhans, M. G. (2002). “Sorting out sand and gravel: Sediment transport and deposition in sand-gravel bed rivers.” Doctoral thesis, Netherlands Geographical Studies 293, Faculty of Geographical Sciences, Utrecht, University, the Netherlands.
Kleinhans, M. G., and van Rijn, L. C. (2002). “Stochastic prediction of sediment transport in sand-gravel bed rivers.” Journal of Hydraulic Engineering, Special Issue on Stochastic Sediment Transport and Hydraulics, 128(4), 412–425.
Klingeman, P. C., Chaquette, C. J., and Hammond, S. B. (1979). “Bed material characteristics near Oak Creek Sediment Transport Research Facilities, 1978–1979.” Oak Creek Sediment Transport Report BM3, Water Resources Research Institute, Oregon State University, Corvallis, Ore., June.
Kodama, Y. (1994a). “Experimental study of abrasion and its role in producing downstream fining in gravel-bed rivers.” Journal of Sedimentary Research, A64(1), 76–85.
Kodama, Y. (1994b). “Downstream changes in the lithology and grain size of fluvial gravels, the Watarase River, Japan: Evidence of the role of abrasion in downstream fining.” Journal of Sedimentary Research, A64(1), 68–75.
Kodama, Y., Ikeda, H., and Iijima, H. (1992). “Longitudinal sediment sorting along a concave upward stream profile in a large flume.” Report, Hydraulic Experimental Center, Tsukuba University, 16, 119–123 (in Japanese).
Komar, P. D. (1987). “Selective gravel entrainment and the empirical evaluation of flow competence.” Sedimentology, 34, 1165–117.
Komar, P. D. (1987). “Selective grain entrainment by a current from a bed of mixed sizes: A reanalysis.” Journal of Sedimentary Research, 57, 203–211.
Komar, P. D., and Carling, P. A. (1991). “Grain sorting in gravel-bed streams and the choice of particle sizes for flow competence evaluations.” Sedimentology, 38, 489–502.
Kondolf, G. M., and Wilcock, P. R. (1996). “The flushing flow problem: Defining and evaluating objectives.” Water Resources Research, 32(8), 2589–2599.
Kostic, S., and Parker, G. (2003). “Progradational sand-mud deltas in lakes and reservoirs. 1: Theory and numerical model.” Journal of Hydraulic Research, 41(2), 127–140.
Kovacs, A., and Parker, G. (1994). “A new vectorial bedload formulation and its application to the time evolution of straight river channels.” Journal of Fluid Mechanics, 267, 153–183.
Kuhnle, R. A. (1992). “Fractional transport rates of bedload on Goodwin Creek.” Dynamics of gravel-bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, New York, 141–155.
Kuhnle, R. A. (1993). “Fluvial transport of sand and gravel mixtures with bimodal size distributions.” Journal of Sedimentary Geology, 85,17–24.
Kuhnle, R. A. (1996). “Unsteady transport of sand and gravel mixtures.” Advances in fluvial dynamics and stratigraphy, Carling P.A. and Dawson M.R., eds., Wiley, New York, 184–201.
Kuhnle, R. A., and Southard, J. B. (1988). “Bedload transport fluctuations in a gravel bed laboratory channel.” Water Resources Research, 24, 247–260.
Kuhnle, R. A., Willis, J. C., and Bowie, A. J. (1989). “Variations in the transport of bed load sediment in a gravel-bed stream, Goodwin Creek, Mississippi, USA.” Proceedings, 4th International Symposium on River Sedimentation, International Research and Training Center on Erosion and Sedimentation, Beijing, China, 539–546.
Lanzoni, S., and Tubino, M. (1999). “Grain sorting and bar instability.” Journal of Fluid Mechanics, 393, 149–174.
Laronne, J., Reid, I., Yitshak, Y., and Frostick, L. E. (1994). “The non-layering of gravel streambeds under ephemeral flood regimes.” Journal of Hydrology, 159, 353–363.
Lenzi, M. A., D’Agostino, V., Comiti, F., Scussel, G. R., De Col, U., and Asti, G. (2000). “Bedload transport data from Rio Cordon torrent: Comparison with sediment transport equations and field data from other Alpine streams.” Quaderni di idronomia montana, special issue, Dynamics of water and sediments in mountain basins, Editoriale Bios, Italy.
Leopold, L. B. (1994). A view of the river. Harvard University Press, Cambridge, Mass.
Leopold, L. B., Emmett W. W., and Myrick, R. H. (1966). “Channel and hillslope processes in a semiarid area, New Mexico.” Professional Paper 352G, U.S. Geological Survey, U.S. Government Printing Office, Washington, D.C.
Leopold, L. B., Wolman, M. G., and Miller, J. P. (1964). Fluvial processes in geomorphology. Freeman, New York, San Francisco.
Liu, X. L. (1986). “Nonuniform bed load transport rate and coarsening stabilization.” MS thesis, Chengdu University, China (in Chinese).
Lisle, T. E. (1989). “Sediment transport and resulting deposition in spawning gravels, north coastal California.” Water Resources Research, 25(6), 1303–1319.
Lisle, T. E. (1995). “Particle size variations between bed load and bed material in natural gravel bed channels.” Water Resources Research, 31(4), 1107–1118.
Lisle, T. E., Cui, Y., Parker, G., Pizzuto, J. E., and Dodd, A. M. (2001). “The dominance of dispersion in the evolution of bed material waves in gravel-bed rivers.” Earth Surface Processes and Landforms, 26, 1409–1420.
Lisle, T. E., and Madej, M. A. (1992). “Spatial variation in armoring in a channel with high sediment supply.” Dynamics of gravel-bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, New York, 277–296.
Lisle, T. E., Pizzuto, J. E., Ikeda, H., Iseya, F., and Kodama, Y. (1997). “Evolution of a sediment wave in an experimental channel.” Water Resources Research, 33(8), 1971–1981.
Marion, A., and Fraccarollo, L. (1997). “Experimental investigation of mobile armoring development.” Water Resources Research, 33(6), 1447–1453.
Marion, A., McEwan, I., and Tait, S. (1997). “On the competitive effects of particle re-arrangement and vertical sorting.” Proceedings, 27th Congress of the International Association for Hydraulic Research, Vol. 2, International Association of Hydraulic Engineering and Research, Madrid, Spain, 1493–1498.
Maunsell and et al. (1982). “Waste rock and sedimentation methodology.” Ok Tedi environmental study, Ok Tedi Mining Ltd., Tabubil, Papua New Guinea.
McLean, S. R. (1991). “Depth-integrated suspended–load calculations.” Journal of Hydraulic Engineering, 117(11), 1440–1458.
McLean, S. R. (1992). “On the calculation of suspended load for non-cohesive sediments.” Journal of Geophysical Research, 97(C4), 1–14.
Mellor, G. L., and Yamada, T. (1974). “A hierarchy of turbulence closure models for planetary boundary layers.” Journal of Atmospheric Science, 31, 1791–1806.
Meyer-Peter, E., and Müller R. (1948). “Formulas for bed-load transport.” Proceedings, 2nd Congress International Association for Hydraulic Research, Stockholm, Sweden, International Association of Hydraulic Engineering and Research, Madrid, Spain, 39–64.
Mikoš, M. (1993). “Fluvial abrasion of gravel sediments.” Mitteilungen 123 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland.
Mikoš, M. (1994). “The downstream fining of gravel-bed sediments in the alpine Rhine River.” Dynamics and geomorphology of mountain rivers, Ergenzinger P. and Schmidt K-H, eds., Springer, New York, Berlin, 93–108.
Mikoš, M. (1995). “Fluvial abrasion: Converting size reduction coefficients to weight reduction coefficients.” Journal of Sedimentary Research, A65(3), 472–476.
Milhous, R. T. (1973). “Sediment transport in a gravel-bottomed stream.” PhD thesis, Oregon State University, Corvallis, Ore.
Milhous, R. T. (1998). “Numerical modeling of flushing flows in gravel-bed rivers.” Gravel-bed rivers in the environment, Klingeman P.C., Beschta R.L., Komar P.D., and Bradley J.B., eds., Water Resources Publications, Highlands Ranch, Colo., 579–602.
Millar, R. G. (1999). “Grain and form resistance in gravel-bed rivers.” Journal of Hydraulic Research, 37(3), 303–312.
Misri, R. L, Garde, R. J., and Ranga Raju, K. G. (1984). “Bed load transport of nonuniform sediments.” Journal of Hydraulic Engineering, 110(3), 312–328.
Nakagawa, H., Tsujimoto, T., and Nakano, S. (1982). “Characteristics of sediment motion for respective grain sizes of sand mixture.” Bulletin, Disaster Prevention Research Institute, Kyoto University, 32, 1–32.
Narinesingh, P. (1995). “Nature restoration and floodplain sedimentation.” MS thesis HH 218, IHE Delft, the Netherlands.
Narinesingh, P., Klaasen, G. J., and Ludikhuize, D. (1999). “Floodplain sedimentation along extended river reaches.” Journal of Hydraulic Research, 37(6), 827–846.
Neill, C. R. (1968). “A reexamination of the beginning of movement for coarse granular bed materials.” Report INT 68, Hydraulics Research Station, Wallingford, UK.
Niño, T., and Aracena, D. (1999). “Experimental observations of ripple growth in non-uniform sediment.” Proceedings, IAHR Symposium on River, Coastal and Estuarine Morphodynamics, Seminara G., ed., Università degli Studi di Genova, Genoa, Italy, 241–150.
Olesen, K. W. (1987). “Bed topography in shallow river bends.” Ph.D. thesis, University of Delft, Delft, The Netherlands.
Onishi, Y., Jain, S. C., and Kennedy, J. F. (1972). “Effects of meandering on sediment discharges and friction factors of alluvial streams.” Report 141, Iowa Institute of Hydraulic Research, University of Iowa, Iowa City, Iowa.
Paintal, A. S. (1971). “Concept of critical shear stress in loose boundary open channels.” Journal of Hydraulic Research, 9, 91–113.
Paola, C. (1996). “Incoherent structure: turbulence as a metaphor for stream braiding.” Coherent flow structures in open channels, Ashworth P.J., Bennett S.J., Best J.L., and McLelland S.J., eds., Wiley, New York, 705–724.
Paola, C. (2000). “Quantitative models of sedimentary basin filling.” Sedimentology, 47(Supplement 1), 121–178.
Paola, C., et al. (2001). “Experimental stratigraphy.” GSA Today, 11(7), 2–9.
Paola, C., Heller, P. L., and Angevine, C. L. (1992a), “The large-scale dynamics of grain-size variation in alluvial basins. I: Theory.” Basin Research, 4, 73–90.
Paola, C., Parker, G., Mohrig, D. C., and Whipple, K. X. (1999). “The influence of transport fluctuations on spatially averaged topography on a sandy, braided fluvial plain.” Numerical Experiments in Stratigraphy, SEPM Special Publication 62, 211–218.
Paola, C., Parker, G., Seal, R., Sinha, S. K., Southard, J. B., and Wilcock, P. R. (1992b). “Downstream fining by selective deposition in a laboratory flume.” Science, 258, 1757–1760.
Paola, C., and Seal, R. (1995). “Grain size patchiness as a cause of selective deposition and downstream fining.” Water Resources Research, 31(5), 1395–1407.
Park, I., and Jain, S. C. (1987). “Numerical simulation of degradation of alluvial channel beds.” Journal of Hydraulic Engineering, 113(7), 845–859.
Parker, G. (1978a). “Self-formed rivers with stable banks and mobile bed. I: The sand-silt river,” Journal of Fluid Mechanics, 89(1), 109–126.
Parker, G. (1978b). “Self-formed rivers with equilibrium banks and mobile bed. II: The gravel river.” Journal of Fluid Mechanics, 89(1), 127–148.
Parker, G. (1979). “Hydraulic geometry of active gravel rivers.” Journal of Hydraulic Engineering, 105(9), 1185–1201.
Parker, G. (1984). “Discussion of ‘Lateral bed load transport on side slopes.’” Journal of Hydraulic Research, 110(2), 197–199.
Parker, G. (1990a). “Surface-based bedload transport relation for gravel rivers.” Journal of Hydraulic Research, 28(4), 417–436.
Parker, G. (1990b). “The ACRONYM series of PASCAL programs for computing bedload transport in gravel rivers.” External Memorandum M-200, St. Anthony Falls Laboratory, University of Minnesota, Minneapolis, Minn.
Parker, G. (1991a). “Selective sorting and abrasion of river gravel. I: Theory.” Journal of Hydraulic Engineering, 117(2), 131–149.
Parker, G. (1991b). “Selective sorting and abrasion of river gravel. II: Application.” Journal of Hydraulic Engineering, 117(2), 150–171.
Parker, G. (1992). “Some random notes on grain sorting.” Proceedings, International Seminar on Grain Sorting, Ascona, Switzerland, Mitteilungen 117 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 19–76.
Parker, G., and Anderson, A. G. (1977). “Basic principles of river hydraulics.” Journal of Hydraulic Engineering, 103(9), 1077–1087.
Parker, G., and Andrews, E. D. (1985). “Sorting of bed load sediment by flow in meander bends.” Water Resources Research, 21(9), 1361–1373.
Parker, G., and Cui, Y. (1998). “The arrested gravel front: Stable gravel-sand transitions in rivers. 1: Simplified analytical solution.” Journal of Hydraulic Research, 36(1), 75–100.
Parker, G., Cui, Y., Imran, J., and Dietrich, W. (1996). “Flooding in the lower Ok Tedi, Papua New Guinea due to the disposal of mine tailings and its amelioration.” Proceedings International Seminar on Recent Trends of Floods and their Preventive Measures, Hokkaido River Disaster Prevention Research Center, Sapporo, Japan, 21–48.
Parker, G., Dhamotharan, S., and Stefan, S. (1982b). “Model experiments on mobile, paved gravel bed streams.” Water Resources Research, 18(5), 1395–1408.
Parker, G., and Klingeman, P. C. (1982). “On why gravel bed streams are paved.” Water Resources Research, 18(5), 1409–1423.
Parker, G., Klingeman, P. C., and McLean, D. G. (1982a). “Bedload and size distribution in paved gravel–bed streams,” Journal of Hydraulic Engineering, 108(4), 544–571.
Parker, G., Paola, C., and Leclair, S. (2000). “Probabilistic form of Exner equation of sediment continuity for mixtures with no active layer.” Journal of Hydraulic Engineering, 126(11), 818–826.
Parker, G., and Peterson, A. W. (1980). “Bar resistance of gravel- bed streams.” Journal of Hydraulic Engineering, 106(10), 1559–1575.
Parker, G., and Sutherland, A. J. (1990). “Fluvial armor.” Journal of Hydraulic Research, 28(5), 529–544.
Parker, G., and Toro-Escobar, C. M. (2002). “Equal mobility of gravel in streams: The remains of the day.” Water Resources Research, 38(11), 1264.
Parker, G., Toro-Escobar, C. M., Ramey, M., and Beck, S. (2003). “The effect of floodwater extraction on the morphology of mountain streams.” Journal of Hydraulic Engineering, 129(11), 885–895.
Pickup, G., Higgins, R. J., and Warner, R. F. (1979). “Impact of waste rock disposal from the proposed Ok Tedi mine on sedimentation processes in the Fly River and its tributaries, Papua New Guinea.” Report, Dept. of Minerals and Energy and Office of Environment and Conservation, Port Moresby, Papua New Guinea.
Pizzuto, J. E. (1995). “Downstream fining in a network of gravel-bedded rivers.” Water Resources Research, 31, 753–759.
Powell, D. M. (1998). “Patterns and processes of sediment sorting in gravel-bed rivers.” Progress in Physical Geography, 22(1), 1–32.
Powell, D. M., Laronne, J. B., and Reid, I. (2003). “The dynamics of bedload sediment transport in low-order, upland, ephemeral gravel-bed rivers.” Advances in Environmental Monitoring and Modelling, 1(2), <http://www.kcl.ac.uk/advances>.
Powell, D. M., Reid, I., and Laronne, J. B. (2001). “Evolution of bedload grain-size distribution with increasing flow strength and the effect of flow duration on the caliber of bedload sediment yield in ephemeral gravel-bed rivers.” Water Resources Research, 37(5), 1463–1474.
Profitt, G. T. (1980). “Selective transport and armoring of non- uniform alluvial sediments.” Research Report 80/22, Department of Civil Engineering, University of Canterbury, New Zealand.
Proffitt, G. T., and Sutherland, A. J. (1983). “Transport of nonuniform sediments.” Journal of Hydraulic Research, 21(1), 33–43.
Rahuel, J. L., Holly, F. M., Chollet, J. P., Belleudy, P. J., and Yang, G. (1989). “Modeling of riverbed evolution for bedload sediment mixtures.” Journal of Hydraulic Engineering, 115(11), 1521–1542.
Rana, S. A., Simons, D. B., and Mahmood, K. (1973). “Analysis of sediment sorting in alluvial channels.” Journal of Hydraulic Engineering, 99(11), 1967–1980.
Reid, I., and Frostick, L. E. (1986). “Dynamics of bed load transport in Turkey Brook, a coarse-grained alluvial channel.” Earth Surface Processes and Landforms, 11, 143–155.
Reid, I., Frostick, L. E., and Layman, J. T. (1985). “The incidence and nature of bedload transport during flood flows in coarse-grained alluvial channels.” Earth Surface Processes and Landforms, 10, 33–44.
Reid, I., Laronne, J. B., and Powell, D. M. (1995). “The Nahal Yatir bedload database: Sediment dynamics in a gravel-bed ephemeral stream.” Earth Surface Processes and Landforms, 20, 845–857.
Reiser, D. W. (1998). “Sediment in gravel bed rivers: Ecological and biological considerations.” Gravel-Bed Rivers in the Environment, Klingeman P.C., Beschta R.L., Komar P.D., and Bradley J.B., eds., Water Resources Publications, Highlands Ranch, Colo., 199–225.
Ribberink, J. S. (1987). “Mathematical modeling of one-dimensional morphological changes in rivers with non-uniform sediment.” PhD thesis, Delft University of Technology, Delft, The Netherlands.
Rice, S. (1998). “Which tributaries disrupt fining along gravel-bed rivers?” Geomorphology, 22: 39–56.
Rice, S. (1999). “The nature and controls on downstream fining within sedimentary links.” Journal of Sedimentary Research, 69(1), 32–39.
Robinson, R. A. J., and Slingerland, R. L. (1998). “Origin of fluvial grain-size trends in a foreland basin: The Pocono formation on the Central Appalachian Basin.” Journal of Sedimentary Research 68(3), 473–486.
Rodi, W. (1993). Turbulence models and their application in hydraulics: A state of the art review, 3rd ed. Balkema, Delft, the Netherlands.
Rood, K., and Church, M. (1994). “Modified freeze-core technique for sampling the permanently wetted streambed.” North American Journal of Fisheries Management, 14, 852–861.
Rouse, H. (1939). “Experiments on the mechanics of sediment suspension.” Proceedings 5th International Congress on Applied Mechanics, Cambridge, Mass., 550–554.
Samaga, B. R., Ranga Raju, K. E., and Garde, R. J. (1986). “Suspended load transport of sediment mixtures.” Journal of Hydraulic Engineering, 112(11), 1019–1035.
Sambrook Smith, G. H., and Ferguson, R. (1995). “The gravel-sand transition along river channels.” Journal of Sedimentary Research, A65(2), 423–430.
Schick, A. P., Lekach, J., and Hassan, M. A. (1987). “Vertical exchange of coarse bedload in desert streams.” Desert sediments: Ancient and modern, Frostick L.E. and Reid I., eds., Geological Society of London Special Publication No. 25, Blackwell Science, Oxford, U.K., 7–16.
Seal, R., and Paola, C. (1995). “Observations of downstream fining on the North Fork Toutle River near Mount St. Helens, Washington.” Water Resources Research, 31(5), 1409–1419.
Seal, R., Paola, C., Parker, G., Southard, J. B., and Wilcock, P. R., (1997). “Experiments on downstream fining of gravel. I: Narrow-channel runs.” Journal of Hydraulic Engineering, 123(10), 874–888.
Seminara, G. (1998). “Stability and morphodynamics.” Meccanica, 33, 59–99.
Seminara, G., Colombini, M., and Parker, G. (1996). “Nearly pure sorting waves and formation of bedload sheets.” Journal of Fluid Mechanics, 312, 253–278.
Seminara, G., Solari, L., and Tubino, M. (1997). “Finite amplitude scour and grain sorting in wide channel bends.” Proceedings, 27th Congress, International Association for Hydraulic Research, San Francisco, Vol. 2, 1445–1450.
Shaw, J., and Kellerhals, R. (1982). “The composition of recent alluvial gravels in Alberta river beds.” Bulletin 41, Alberta Research Council, Edmonton, Alta., Canada.
Shields, I. A. (1936). “Anwendung der ahnlichkeitmechanik und der turbulenzforschung auf die gescheibebewegung.” Mitteilungen Preussischen Versuchsanstalt für Wasserbau und Schiffbau, 26, Berlin, Germany.
Shih, S.-H., and Komar, P. D. (1990). “Differential bedload transport rates in a gravel-bed stream: a grain-size distribution approach.” Earth Surface Processes and Landforms, 15, 539–552.
Sidle, R. C. (1988). “Bed load transport regime of a small forest stream.” Water Resources Research, 24(2), 207–218.
Simons, D. (1971). “River and canal morphology.” River Mechanics, Shen H.W., ed., Water Resources Publications, Highlands Ranch, Colo., 20-1–20-60.
Smart, G. M. (1984). “Sediment transport formula for steep channels.” Journal of Hydraulic Engineering, 110(3), 267–276.
Smart, G. M., and Jaeggi, M. N. R. (1983). “Sediment transport on steep slopes.” Mitteilungen 64 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 19–76.
Smith, J. D., and McLean, S. R. (1977). “Spatially averaged flow over a wavy surface.” Journal of Geophysical Research, 82(12), 1735–1746.
Smith, R. D. (1990). “Streamflow and bedload transport in an obstruction-affected, gravel-bed stream.” PhD thesis, Oregon State University, Corvallis.
Smith, R. D., Sidle, R. C., and Porter, P. E. (1993). “Effects on bedload transport of experimental removal of woody debris from a forest gravel-bed stream.” Earth Surface Processes and Landforms, 18, 455–468.
Solari, L., and Parker, G. 2000. “The curious case of mobility reversal in sediment mixtures.” Journal of Hydraulic Engineering, 126(3), 198–208.
Speziale, C. G. (1987). “On nonlinear k-l and k-ε models of turbulence.” Journal of Fluid Mechanics, 178, 459–475.
Straub, L. G. (1935). “Some observations of sorting of river sediments.” Transactions, American Geophysical Union Annual Meeting, 16, 463–467.
Sutherland, A. J. (1987). “Static armor layers by selective erosion.” Sediment transport in gravel-bed rivers, Thorne C.R. et al., eds., Wiley, New York, 343–267.
Sutherland, D. G., Ball, M. H., Hilton, S. J., and Lisle, T. E. (2002). “Evolution of a landslide-induced sediment wave in the Navarro River, California.” Bulletin of the Geological Society of America, 114(8), 1036–1048.
Suzuki, K., and Hano, A. (1992). “Grain size change of bed surface layer and sediment discharge of an equilibrium river bed.” Proceedings, International Seminar on Grain Sorting, Ascona, Switzerland, Mitteilungen 117 der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie, ETH Zurich, Zurich, Switzerland, 151–156.
Suzuki, K., and Kato, K. (1991). “Mobile bed armoring of bed surface in a steep slope river with gravel and sand mixture.” Proceedings, International Workshop on Fluvial Hydraulics of Mountain Regions, Trento, Università degli Studi di Trento, Italy, 393–404.
Suzuki, K., and Michiue, M. (1979). “On the dune height and the influence of sand mixture on its characteristics.” Proceedings, 23rd Annual Conference on Hydraulic Engineering, Japan Society for Civil Engineering, Tokyo, Japan, 151–156.
Swenson, J. B., Voller, V. R., Paola, C., Parker, G., and Marr, J. (2000). “Fluvio-deltaic sedimentation: A generalized Stefan problem.” European Journal of Applied Mathematics, 11, 433–452.
Tacconi, P., and Billi, P. (1987). “Bed load transport measurements by vortex-tube trap on Virginio Creek, Italy.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, New York, 583–606.
Tait, S. J., Willetts, B. B., and Maizels, J. K. (1992). “Laboratory observations of bed armoring and changes in bedload composition.” Dynamics of gravel bed rivers, Billi P. et al., eds., Wiley, New York, 205–225.
Tatsuzawa, H., Hayashi, H., and Hasegawa, K. (1999a). “Role of heterogeneous property of bed materials in the formation of step-pool systems in mountain rivers.” Journal of Hydroscience and Hydraulic Engineering, 17(1), 37–45.
Tatsuzawa, H., Hayashi, H., and Hasegawa, K. (1999b). “A study on small-scale bed topography in mountain streams.” Proceedings, Japan Society for Civil Engineering,, 656(II-52), 83–101 (in Japanese).
Thompson, S. M. (1985). “Transport of gravel by flows up to 500 m3/s, Ohau River, Otago, N. Z.” New Zealand Journal of Hydraulic Research, 23(3), 285–303.
Toro-Escobar, C. M., Paola, C., Parker, G., Wilcock, P. R., and Southard, J. B. (2000). “Experiments on downstream fining of gravel. II: Wide and sandy runs.” Journal of Hydraulic Engineering, 126(3): 198–208.
Toro-Escobar, C. M., Parker, G., and Paola, C. (1996). “Transfer function for the deposition of poorly sorted gravel in response to streambed aggradation.” Journal of Hydraulic Research, 34(1), 35–53.
Tsujimoto, T. (1991). “Mechanics of sediment transport of graded materials and fluvial sorting.” Report, Project 01550401, Kanazawa University, Japan.
Tsujimoto, T. (1999). “Sediment transport processes and channel incision: mixed size sediment transport, degradation and armoring,” Incised River Channels, Darby, S. E. and Simon A., eds., John Wiley & Sons.
Tsujimoto, T., and Motohashi, K. (1990). “Static armoring and dynamic pavement.” Journal of Hydroscience and Hydraulic Engineering, 8(1), 55–67.
Van Niekerk, A., Vogel, K. R., Slingerland, R. L., and Bridge, J. S. (1992). “Routing of heterogeneous sediments over mobile bed: Model development.” Journal of Hydraulic Engineering, 118(2), 246–252.
Van Rijn, L. C. (1984). “Sediment transport. I: Bedload transport.” Journal of Hydraulic Engineering, 110(10), 1613–1641.
Van der Scheer, P., Blom, A., and Ribberink, J. S. (2001). “Transport formulas for graded sediment. Behavior of transport formulas and verification with experimental data.” Research Report 2001-R-004/MICS-023, University of Twente, the Netherlands.
Vogel, K. R., van Niekerk, A., Slingerland, R., and Bridge, J. S. (1992). “Routing of heterogeneous sediments over movable bed: Model verification.” Journal of Hydraulic Engineering, 118(2), 263–279.
Waterways Experiment Station (1935). “Analysis of Mississippi River bed materials.” Paper 17, Waterways Experiment Station, U. S. Army Corps of Engineers, Vicksburg, Miss.
Wathen, S. J., Ferguson, R. I., Hoey, T. B., and Werrity, A. (1995). “Unequal mobility of gravel and sand in weakly bimodal river sediments.” Water Resources Research, 31(8), 2087–2096.
White, W. R., and Day, T. J. (1982). “Transport of graded gravel bed material.” Gravel-bed rivers, Hey R.D., Thorne C., and Bathurst J., eds., Wiley, New York, 181–223.
White, W. R., Paris, E., and Bettess, R. (1980). “The frictional characteristics of alluvial streams: A new approach.” Proceedings of the Institution of Civil Engineers, Part 2, 69, 737–750.
Whiting, P. J. (1996). “Sediment sorting over bed topography.” Advances in fluvial dynamics and stratigraphy, Carling P.A. and Dawson M.R., eds., Wiley, New York, 203–228.
Whiting, P. J., Dietrich, W. E., Leopold, L. B., Drake, T. G., and Shreve, R. L. (1988). “Bedload sheets in heterogeneous sediment.” Geology, 16(2), 105–108.
Whittaker, J. G., and Jaeggi, M. N. R. (1982). Origin of step-pool systems in mountain streams. Journal of Hydraulic Engineering, 108(6), 758–773.
Wiberg, P. L., and Smith, J. D. (1987). “Calculations of the critical shear stress for motion of uniform and heterogeneous sediments.” Water Resources Research, 23(8), 1471–1480.
Wilcock, P. R. (1988). “Methods for estimating the critical shear stress of individual fractions in mixed-size sediment.” Water Resources Research, 24(7), 1127–1135.
Wilcock, P. R. (1997a). “The components of fractional transport rate.” Water Resources Research, 33(1), 247–258.
Wilcock, P. R. (1997b). “Entrainment, displacement and transport of tracer gravels.” Earth Surface Processes and Landforms, 22, 1125–1138.
Wilcock, P. R. (1998a). “Two-fraction model of initial sediment motion in gravel-bed rivers.” Science, 280, 410–412.
Wilcock, P. R. (1998b). “Sediment maintenance flows: Feasibility and basis for prescription.” Gravel-bed rivers in the environment, Klingeman P.C., Beschta R.L., Komar P.D., and Bradley J.B., eds., Water Resources Publications, Highlands Ranch, Colo., 609–633.
Wilcock, P. R. (2000). “The flow, the bed, and the transport: Interaction in flume and field.” Gravel-Bed Rivers V, Mosley M.P., ed., Water Resources Publications, Highlands Ranch, Colo., 183–219.
Wilcock, P. R. (2001). “Toward a practical method for estimating sediment-transport rates in gravel-bed rivers.” Earth Surface Processes and Landforms, 26, 1395–1408.
Wilcock, P. R., and Crowe, J. C. (2003). “Surface-based transport model for mixed-size sediment.” Journal of Hydraulic Engineering, 129(2), 120–128.
Wilcock, P. R., and Kenworthy S.T. (2002). “A two fraction model for the transport of sand-gravel mixtures.” Water Resources Research, 38(10), 1194–2003.
Wilcock, P. R., Kenworthy, S. T., and Crowe, J. C. (2001). “Experimental study of the transport of mixed sand and gravel.” Water Resources Research, 37(12), 3349–3358.
Wilcock, P. R., Kondolf, G. M., Mathews, W. V. G., and Barta, A. F. (1996). “Specification of sediment maintenance flows for a large gravel-bed river.” Water Resources Research, 32(9), 2911–2921.
Wilcock, P. R., Kondolf, G. M., Mathews, W. V. G., and Barta, A. F. (1996). “Specification of sediment maintenance flows for a large gravel-bed river.” Water Resources Research, 32(9), 2911–2921.
Wilcock, P. R., and McArdell, B. W. (1993). “Surface based fractional rates: Mobilization thresholds and partial transport of a sand-gravel sediment.” Water Resources Research, 25(7), 1629–1641.
Wilcock, P. R., and McArdell, B. W. (1997). “Partial transport of a sand/gravel sediment.” Water Resources Research, 33(1), 235–245.
Wilcock, P. R., and Southard, J. B. (1988). “Experimental study of incipient motion in mixed-size sediment.” Water Resources Research, 24(7), 1137–1151.
Willetts, B. B., Pender, G., and McEwan, I. K. (1998) “Experiments on the transport of graded sediment.” Proceedings Institution of Civil Engineers Waterways, Maritime and Energy, 130, 217–225.
Williams, G. P., and Rosgen, D. L. (1989). “Measured total sediment load (suspended load and bed load) for 93 United States streams.” Open-File Report 89-67, U.S. Geological Survey, U.S. Government Printing Office, Washington, D.C.
Williams, G. P., and Wolman, M. G. (1984). “Downstream effects of dams on alluvial rivers.” Professional Paper 1286, U.S. Geological Survey, U.S. Government Printing Office, Washington, D.C.
Wolman, M. G. (1954). “A method of sampling coarse riverbed material.” Eos Transactions American Geophysical Union, 35, 951–956.
Wright, S., and Parker, G. (2004a). “Density stratification effects in sand-bed rivers.” Journal of Hydraulic Engineering, 130(8), 783–795.
Wright, S., and Parker, G. (2004b). “Flow resistance and suspended load in sand-bed rivers: Simplified stratification model.” Journal of Hydraulic Engineering, 130(8), 796–805.
Wu, W., Wang, S. S. Y., and Jia, Y. (2000). “Nonuniform sediment transport in alluvial rivers.” Journal of Hydraulic Research, 38(6), 427–434.
Yamasaka, M., Ikeda, S., and Kizaki, S. (1987). “Lateral sediment transport of heterogeneous bed materials.” Proceedings, Japan Society of Civil Engineering, 387(II-8), 105–114 (in Japanese).
Yamamoto, K. (1994). The study of alluvial rivers, Sankaidou, Tokyo, Japan (in Japanese).
Yang, C. T. (1973). “Incipient motion and sediment transport.” Journal of Hydraulic Engineering, 99(10), 1679–1704.
Yang, C. T. (1984). “Unit stream power equation for gravel.” Journal of Hydraulic Engineering, 110(12), 1783–1797.
Yang, C. T. (1996). Sediment transport theory and practice, McGraw-Hill, New York.
Yang, C. T., and Wan, S. (1991). “Comparisons of selected bed-material load formulas.” Journal of Hydraulic Engineering, 117(8), 973–990.
Yatsu, E. (1955). “On the longitudinal profile of the graded river.” Transactions, American Geophysical Union, 36, 655–663.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 165 - 251
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.