Appendix D
Estimating Sediment Discharge
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ackers, P. (1993). “Sediment transport in open channels: Ackers and White update.” Proceedings of the Institute of Civil Engineers, Water, Maritime, and Energy, 101, 247–249.
Ackers, P., and White, W. R. (1973). “Sediment transport: New approach and analysis.” Journal of the Hydraulics Division, ASCE, 99(HY11), 2041–2060.
Alonso, C. V. (1980). “Chapter 5: Selecting a formula to estimate sediment transport capacity in nonvegetated channels.” CREAMS (A field scale model for chemicals, runoff, and erosion from agricultural management system), Knisel W.G., ed., Conservation Research Report 26, U.S. Department of Agriculture, Oxford, Miss., 426–439.
Alonso, C. V., Neibling, W. H., and Foster, G. R. (1982). “Estimating sediment transport capacity in watershed modeling.” Transactions of the ASAE, 25(5), 1211–1220 and 1226.
ASCE Task Committee on Relations between Morphology of Small Streams and Sediment Yield of the Committee on Sedimentation of the Hydraulics Division (ASCE). (1982). “Relationships between morphology of small streams and sediment yields.” Journal of the Hydraulics Division, ASCE, 108(HY11), 1328–1365.
Ashworth, P. J., and Ferguson, R. I. (1986). “Interrelationships of channel processes, changes and sediments in a proglacial braided river.” Geografiska Annaler, 68A(4), 361–371.
ASTM International. (1997). Standard test method for determining sediment concentration in water samples. ATM Designation D 3977-97, ASTM International, West Conshohocken, PA.
Bagnold, R. A. (1956). “The flow of cohesionless grains in fluids.” Philosophical Transactions of the Royal Society of London, Series A, 249(964), 235–297.
Bagnold, R. A. (1966). “An approach to the sediment transport problem from general physics.” Professional Paper 422-I, U.S. Geological Survey, Reston, Va.
Bagnold, R. A. (1980). “An empirical correlation of bed load transport rates in flumes and natural rivers.” Proceedings of the Royal Society of London, Series A, 372, 453–473.
Bakke, P. D., Basdekas, P. O., Dawdy, D. R., and Klingeman, P. C. (1999). “Calibrated Parker-Klingeman model for gravel transport.” Journal of Hydraulic Engineering, ASCE, 125(6), 657–660.
Bathurst, J. C., Graf, W. H., and Cao, H. H. (1987). “Bedload discharge equations for steep mountain rivers.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., John Wiley, Chichester, U.K., 453–477.
Bean, E. A., and Al-Nassri, S. (1988). “Uncertainty in suspended sediment transport curves.” Journal of Hydraulic Engineering, ASCE, 114(1), 63–73.
Bent, G. C., Gray, J. R., Smith, K. P., and Glysson, G. D. (2001). “A synopsis of technical issues for monitoring sediment in highway and urban runoff.” Open-File Report 00-497, U.S. Geological Survey, <http://ma.water.usgs.gov/FHWA/NDAMSP1.html> (Oct. 7, 2005).
Bogen, J., Fergus, T., and Walling, D. E. (2003). Erosion and sediment transport measurement in rivers: Technological and methodological advances. IAHS Publication 283, Wallingford, UK.
Bravo-Espinosa, M. (1999). “Prediction of bedload discharge for alluvial channels.” PhD dissertation, University of Arizona.
Bravo-Espinosa, M., Osterkamp, W. R., and Lopes, V. L. (2003). “Bedload transport in alluvial channels.” Journal of Hydraulic Engineering, ASCE, 129(10), 783–795.
Brown, C. B. (1950). “Sediment transportation.” Engineering hydraulics, Rouse H., ed., Wiley, New York.
Brownlie, W. R. (1981). “Prediction of flow depth and sediment discharge in open-channels.” Rep. KH-R-43A, W. M. Keck Laboratory, California Institute of Technology, Pasadena, Calif.
Buchanon, T. J., and Somers, W. P. (1969). “Book 3, Chapter 2: Discharge measurements at gaging stations.” Techniques of water-resources investigations, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/twri/twri03A8> (Oct. 6, 2005).
Bunte, K. (1996). “Analysis of temporal variation of coarse bedload transport and its grain size distribution, Squaw Creek, Montana, USA.” General Technical Report RM-GTR-288, U.S. Forest Service, Fort Collins, Colo., <http://stream.fs.fed.us/news/streamnt/pdf/SN_4-97.pdf> (Oct. 7, 2005).
Bunte, K., and Abt, S. R. (2001). “Sampling surface and subsur-face particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring.” General Technical Report RMRS-GTR-74, U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station, Fort Collins, Colo., <http://www.fs.fed.us/rm/pubs/rmrs_gtr74.html> (Oct. 7, 2005).
Childers, D. (1999). “Field comparisons of six pressure-difference bedload samplers in high-energy flow.” Water-Resources Investigations Report 92-4068, U.S. Geological Survey, Vancouver, Wash., <http://pubs.er.usgs.gov/pubs/wri/wri924068> (Oct. 5, 2005).
Cohn, T. A., DeLong, L. L., Gilroy, E. J., Hirsch, R. M., and Wells, D. K. (1989). “Estimating constituent loads.” Water Resources Research, 25(5), 937–942.
Colby, B. R. (1956). “Relationship of sediment discharge to stream-flow.” Open-File Report, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/ofr/ofr5627> (Oct. 6, 2005).
Colby, B. R. (1964). “Practical computations of bed material discharge.” Journal of Hydraulic Engineering, ASCE, 90(HY2), 217–246, <http://pubs.er.usgs.gov/pubs/wsp/wsp1357> (Oct. 6, 2005).
Colby, B. R., and Hembree, C. H. (1955). “Computations of total sediment discharge, Niobrara River near Cody, Nebraska.” Water-Supply Paper 1357, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/wsp/wsp1357> (Oct. 6, 2005).
Crawford, C. G. (1991). “Estimation of suspended-sediment rating curves and mean suspended-sediment loads.” Journal of Hydrology, 129, 331–348.
Damgaard, J. S., Whitehouse, R. J., and Soulsby, R. L. (1997). “Bed-load sediment transport on steep longitudinal slopes.” Journal of Hydraulic Engineering, ASCE, 123(12), 1130–1138.
Davis, B. E., and the Federal Interagency Sedimentation Project. (2005). “A guide to the proper selection and use of federally approved sediment and water-quality samplers.” Open-File Report 2005-1087, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/ofr/ofr20051087> (Oct. 7, 2005).
Diplas, P. (1987). “Bedload transport in gravel-bed streams.” Journal of Hydraulic Engineering, ASCE, 113(HY3), 277–292.
Dou, G. (1974). “Similarity theory and its application to the design of total sediment transport model.” Research Bulletin, Nanjing Hydraulic Research Institute, Nanjing, China (in Chinese).
Duan, N. (1983). “Smearing estimate: A nonparametric retransformation method.” Journal of the American Statistical Association, 78(383), 605–610.
DuBoys, M. P. (1879). “Le Rhône et les rivières à lit affouillable.” Annals de Ponts et Chaussées, Section 5, 18, 141–195. (In French.)
Edwards, T. E., and Glysson, G. D. (1999). “Book 3, Chapter C2: Field methods for measurement of fluvial sediment.” Techniques of Water-Resources Investigations, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/osw/techniques/Edwards-TWRI.pdf> (Oct. 5, 2005).
Einstein, H. A. (1942). “Formula for the transportation of bed-load.” Transactions of the ASCE 107, Washington, DC, 561–597.
Einstein, H. A. (1950). “The bed-load function for sediment transportation in open channel flows.” Technical Bulletin 1026, U.S. Department of Agriculture, Soil Conservation Service.
Emmett, W. W. (1979). “A field calibration of the sediment-trapping characteristics of the Helley-Smith bedload sampler.” Professional Paper 1139, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/pp/pp1139> (Oct. 6, 2005).
Engelund, F., and Fredsøe, J. (1976). “A sediment transport model for straight alluvial channels.” Nordic Hydrology, 7, 293–306.
Engelund, F., and Hansen, E. (1967). A monograph on sediment transport in alluvial streams, Teknisk Forlag, Copenhagen, Denmark.
Ferguson, R. I. (1986). “River loads underestimated by rating curves.” Water Resources Research, 22(1), 74–76.
Frijlink, H. C. (1952). “Discussion des formulas de debit solide de Kalinske, Einstein et Meyer-Peter et Mueller compte tenue des measures récentes de transport dans les rivières Néerlandaises.” 2me Journal Hydraulique, Sec. Hydraulique de France, Grenoble, 98–103 (in French).
Frost, L. R., and Mansue, L. J. (1984). “Evaluation of a hydrograph-shifting method for estimating suspended-sediment loads in Illinois streams.” Water-Resources Investigations Report 84-4037, U.S. Geological Survey, Urbana, Ill., <http://pubs.er.usgs.gov/pubs/wri/wri844037> (Oct. 6, 2005).
Garde, R. J., and Ranga Raju, K. G. (1977). Mechanics of sediment transportation and alluvial stream problems, Wiley, New Delhi, India.
Glysson, G. D. (1987). “Sediment-transport curves.” Open-File Report 87-218, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/ofr/ofr87201> (Oct. 6, 2005).
Glysson, G. D., Gray, J. R., and Conge, L. M. (2000). “Adjustment of total suspended solids data for use in sediment studies.” Proc., ASCE’s 2000 Joint Conference on Water Resources Engineering and Water Resources Planning and Management, ASCE, Reston, Va. <http://water.usgs.gov/osw/techniques/sedimentpubs.html> (Oct. 6, 2005).
Glysson, G. D., Gray, J. R., and Schwarz, G. E. (2001). “Comparison of load estimates using total suspended solids and suspended-sediment concentration data.” Proc., ASCE World Water & Environmental Resources Congress, ASCE, Reston, Va. <http://water.usgs.gov/osw/techniques/sedimentpubs.html> (Oct. 6, 2005).
Gomez, B., and Church, M. (1989). “An assessment of bed load sediment transport formulae for gravel bed rivers.” Water Resources Research, 25(6), 1161–1186.
Graf, W. H. (1984). Hydraulics of sediment transport, Water Resources Publications, Littleton, Colo.
Graf, W. H., and Acaroglu, E. R. (1968). “Sediment transport in conveyance systems. 1.” Bulletin of the International Association for the Science of Hydraulics, 13(2), 20–39.
Graf, W. H., and Suszka, L. (1987). “Sediment transport in steep channels.” Journal of Hydrosciences and Hydraulic Engineering, ASCE, 5(1), 11–26.
Gray, J. R. (2003). “The need for surrogate technologies to monitor fluvial sediment transport.” Proc., Subcommittee on Sedimentation’s Turbidity and Other Sediment Surrogates Workshop, Circular 1250, U.S. Geological Survey, Reston Va., <http://water.usgs.gov/osw/techniques/turbidity.html> (Oct. 7, 2005).
Gray, J. R., ed. (2005). Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop. Circular 1276, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/pubs/circ/2005/circ1276/> (Oct. 6, 2005); Appendix 4 is available only online, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate2003workshop/listofpapers.html> (Oct. 6, 2005).
Gray, J. R., and Glysson, G. D. (2003). Proc. of the Federal Interagency Sedimentation Workshop on Turbidity and Other Sediment Surrogates. Circular 1250, U.S. Geological Survey, Reston, Va., <http://pubs.usgs.gov/circ/2003/circ1250/> (Oct. 6, 2005); Appendix 2 contains 29 extended abstracts that are available only online, <http://water.usgs.gov/osw/techniques/TSS/listofabstracts.htm> (Oct. 6, 2005).
Gray, J. R., Glysson, G. D., Turcios, L. M., and Schwarz, G. E. (2000). “Comparability of suspended-sediment concentration and total suspended solids data.” Water-Resources Investigations Report 00-4191, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/osw/techniques/sedimentpubs.html> (Oct. 6, 2005).
Gray, J. R., Webb, R. H., and Hyndman, D. W. (1991). “Low-flow sediment transport in the Colorado River.” Proc., 5th Federal Interagency Sedimentation Conference, Vol. I, U.S. Geological Survey, Reston, Va., 4-63–4-71, <http://water.usgs.gov/pubs/misc_reports/FISC_1947-2001/> (Oct. 6, 2005).
Guy, H. P. (1970). “Book 3, Chapter C1: Fluvial sediment concepts.” Techniques of Water-Resources Investigations, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/twri/twri03C1> (Oct. 6, 2005).
Holmes, R. R., Jr. (1993). “Sediment transport in the lower Missouri and the central Mississippi Rivers, June 26 through September 14, 1993.” Circular 1120-I, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/cir/cir1120I> (Oct. 6, 2005).
Holmquist-Johnson, C. (2004). Bureau of Reclamation Automated Modified Einstein Procedure (BORAMEP) for computing total sediment discharge. Bureau of Reclamation Technical Service Center, Denver, Colo.
Hubbell, D. W., and Matejka, D. Q. (1959). “Investigations of sediment transportation Middle Loup River at Dunning, Nebraska.” Water-Supply Paper 1476, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/wsp/wsp1476> (Oct. 6, 2005).
Kalinske, A. A. (1947). “Movement of sediment as bed-load in rivers.” Transactions of the American Geophysical Union, 28(4), 310–317.
Karim, F. (1998). “Bed material discharge prediction for nonuniform bed sediments.” Journal of Hydraulic Engineering, ASCE, 124(6), 597–604.
Karim, M. F., and Kennedy, J. F. (1990). “Menu of coupled velocity and sediment-discharge relations for rivers.” Journal of Hydraulic Engineering, ASCE, 116(8), 978–996.
Koltun, G. F., Gray, J. R., and McElhone, T. J. (1994). “User’s manual for SEDCALC, a computer program for computation of suspended-sediment discharge.” Open-File Report 94-459, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/ofr/ofr94459> (Oct. 6, 2005).
Kuhnle, R. A., and Wren, D. G. (2005). “Breakout session I, Suspended-sediment measurement: Data needs, uncertainty, and new technologies.” Proc. of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop, Gray J.R., ed., Circular 1276, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/pubs/circ/2005/circ1276/> (Oct. 6, 2005); Appendix 4 is available only online, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate2003workshop/listofpapers.html> (Oct. 6, 2005).
Landers, M. N., and Freeman, L. A. (2005). Breakout session IV, Sediment data: Management, sediment–flux computations, and estimates from new technologies.” Proc. of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop, Gray J.R., ed., Circular 1276, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/pubs/circ/2005/circ1276/> (Oct. 6, 2005); Appendix 4 is available only online, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate2003workshop/listofpapers.html> (Oct. 6, 2005).
Laursen, E. M. (1958). “The total sediment load of streams.” Journal of the Hydraulics Division, ASCE, 84(HY1), 1530–1 to 1530–36.
Leopold, L. B., and Emmett, W. W. (1997). “Bedload and river hydraulics—Inferences from the East Fork River, Wyoming.” Professional Paper 1583, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/pp/pp1583> (Oct. 6, 2005).
Livesey, R. H. (1975). “Corps of Engineers method for predicting sediment yields.” Present and prospective technology for predicting sediment yields and sources: Proceedings of the Sediment-Yield Workshop, USDA Sedimentation Laboratory, Oxford, Miss., ARS-S-40, 16–32.
Lopes, V. L., Osterkamp, W. R., and Bravo-Espinosa, M. (2001). “Evaluation of selected bedload equations under transport- and supply-limited conditions.” Proceedings of the 7th Federal Interagency Sedimentation Conference, Vol. I, U.S. Geological Survey, Reston, Va., I-192 to I-195.
Madden, E. B. (1993). “Modified Laursen method for estimating bed-material sediment load.” Contract Report HL-93-3, U.S. Army Corps of Engineers, Waterways Experiment Station, Vicksburg, Miss.
McKallip, T. E., Koltun, G. F., Gray, J. R., and Glysson, G. D. (2001). “GCLAS—A graphical constituent loading analysis system.” Proceedings of the 7th Federal Interagency Sedimentation Conference, Vol. II, U.S. Geological Survey, Reston, Va., VI-49 to VI-52, <http://water.usgs.gov/pubs/misc_reports/FISC_1947-2001/> (Oct. 6, 2005).
Meade, R. H., Yuzyk, T. R., and Day, T. J. (1990). “Movement and storage of sediment in rivers of the United States and Canada.” The geology of North America. Vol. 0-1: Surface water hydrology, Wolman M.G. and Griggs H.C., eds., The Geological Society of America, Boulder, Colo., 255–280.
Meyer-Peter, E., Favre, H., and Einstein, A. (1934). “Neuere Versuchsresultate uber den Geschiebertrieb.” Schweiz Bauzeitung, 103(13), 89–91 (in German).
Meyer-Peter, E., and Müller, R. (1948). “Formula for bedload transport.” Proceedings of the 2nd Meeting of the IAHR, Stockholm, 39–64.
National Council for Air and Stream Improvement (NCASI). (1999). “Scale considerations and the detectability of sedimentary cumulative watershed effects.” Technical Bulletin 776, National Council for Air and Stream Improvement, Research Triangle Park, NC.
O’Brien, P. S., and McCorquodale, A. (2001). “Application of Modified Einstein method using increment channel geometry.” Proc., 7th Federal Interagency Sedimentation Conference, Vol. I, U. S. Geological Survey, Reston, Va., I-184 to I-191, <http://water.usgs.gov/pubs/misc_reports/FISC_1947-2001/> (Oct. 6, 2005).
Paintal, A. S. (1971). “A stochastic model of bed load transport.” Journal of Hydraulic Research, 9(4), 527–554.
Parker, G. (1990). “Surface-based bedload transport relation for gravel rivers.” Journal of Hydraulic Research, 28(4), 417–436.
Parker, G., Klingeman, P. C., and McLean, D. G. (1982). “Bedload and size distribution in paved gravel-bed streams.” Journal of the Hydraulics Division, ASCE, 108(HY4), 544–571.
Pemberton, E. L. (1972). “Chapter 16: Einstein’s bedload function applied to channel design and degradation.” Sedimentation: Symposium to honor Prof. H.A. Einstein, Shen H.W., ed., H.W. Shen, Fort Collins, Colo.
Porterfield, G. (1972). “Book 3, Chapter C3: Computation of fluvial-sediment discharge.” Techniques of Water-Resources Investigations Report, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/twri/twri03C3> (Oct. 6, 2005).
Porterfield, G., Busch, R. D., and Waananen, A. O. (1978). “Sediment transport in the Feather River, Lake Oroville to Yuba City, California.” Water-Resources Investigations Report 78–20, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/wri/wri7820> (Oct. 7, 2005).
Rantz, S. E. (1982). “Measurement and computation of streamflow.” Water-Supply Paper 2175, Vols. 1 and 2, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/pubs/wsp/wsp2175/> (Oct. 6, 2005).
Rubin, D. M., and Topping, D. J. (2001). “What regulates suspended-sediment transport in a given setting? Grain size of bed sediment or flow?” Proceedings of the 7th Federal Interagency Sedimentation Conference, Vol. I, U.S. Geological Survey, Reston, Va., I-199 to I-205, <http://water.usgs.gov/pubs/misc_reports/FISC_1947-2001/> (Oct. 6, 2005).
Ryan, S. E., Bunte, K., and Potyondy, J. P. (2005). “Breakout session II, Bedload-transport measurement: Data needs, uncertainty, and new technologies.” Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop, Gray J.R., ed., Circular 1276, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/pubs/circ/2005/circ1276/> (Oct. 6, 2005); Appendix 4 is available only online, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate2003workshop/listofpapers.html> (Oct. 6, 2005).
Schoklitsch, A. (1934). “Der Geschiebetrieb und die Geschie-befracht.” Wasserkraft und Wasserwirtschaft, 29(4), 37–43 (in German).
Schoklitsch, A. (1962). Handbuch des wasserbaues, Springer, Vienna, Vol. 1, 173–177.
Shen, H. W., and Hung, C. S. (1972). “Chapter 14: An engineering approach to total bed material load by regression analysis.” Proc., Sedimentation Symposium, Shen H.W. (ed.), Water Resources Publications, Highlands Ranch, CO, 14-1 – 14-17.
Shields, A. (1936). “Anwendung der Ahnlichkeitsmechanik und Turbulenz forschung auf die Geschiebebewegung.” Mitteil. Preuss. Versuchsanst. Wasser, Erd, Schiffsbau, No. 26, Berlin (in German).
Shulits, S., and Hill, R. D., Jr. (1968). Bedload formulas, The Pennsylvania State University, University Park, Pa.
Smart, G. M. (1984). “Sediment transport formula for steep channels.” Journal of Hydraulic Engineering, ASCE, 110(3), 267–276.
Stelczer, K. (1981). Bed-load transport theory and practice, Water Resources Publications, Littleton, Colo.
Stevens, H. H., Jr. (1985). “Computer program for the computation of total sediment discharge by the modified Einstein procedure.” Water-Resources Investigations Report 85-4047, plus 10 appendices, U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/software/modein.html> (Oct. 5, 2005).
Stevens, H. H., Jr., and Yang, C. T. (1989). “Summary and use of selected fluvial sediment-discharge formulas.” Water-Resources Investigations Report 89-4026, plus 7 appendices, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/wri/wri894026> (Oct. 6, 2005), <http://water.usgs.gov/software/seddisch.html> (Oct. 6, 2005).
Suszka, L. (1991). “Modification of transport rate formula for steep channels.” Fluvial hydraulics of mountain regions, Armanini A. and DiSilvio G., eds., Springer, New York, 59–70.
Toffaleti, F. B. (1968). “A procedure for computation of the total river sand discharge and detailed distribution, bed to surface.” Technical Rep. 5, Committee on Channel Stabilization, Army Corps of Engineers, Vicksburg, Miss.
Toffaleti, F. B. (1969). “Definitive computations of sand discharge in rivers.” Proc. Paper 6350, Journal of the Hydraulics Division, ASCE, 95(HY1), 225–248.
Turcios, L. M., and Gray, J. R. (2001). “U.S. Geological Survey sediment and ancillary data on the World Wide Web.” Proc., 7th Federal Interagency Sedimentation Conference, Vol. 1, U.S. Geological Survey, Reston, Va., Poster 31–36, <http://water.usgs.gov/pubs/misc_reports/FISC_1947-2001/> (Oct. 6, 2005).
Turcios, L. M., Gray, J. R., and Ledford, A. L. (2000). “Summary of U.S. Geological Survey on-line instantaneous fluvial sediment and ancillary data.” U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/osw/sediment> (June 26, 2001).
U.S. Geological Survey (USGS). (2000a). “MODEIN, computation of total sediment discharge by the modified Einstein procedure.” U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/software/modein.html> (June 28, 2000).
U.S. Geological Survey (USGS) (2000b). “SEDDISCH, computation of fluvial sediment discharge.” U.S. Geological Survey, Reston, Va., <http://water.usgs.gov/software/seddisch.html> (June 28, 2000).
U.S. Geological Survey (USGS). (2001). “Office of Surface Water acoustic Doppler current profiler support page.” U.S. Geological Survey, Reston, Va., <http://www-il.usgs.gov/adcp/> (May 22, 2001).
U.S. Geological Survey (USGS). (2005). “NWISWeb data for the nation.” <http://waterdata.usgs.gov/nwis/> (Oct. 6, 2005).
Van Rijn, L. C. (1984a). “Sediment transport. I: Bed load transport.” Journal of Hydraulic Engineering, ASCE, 110(10), 1431–1456.
Van Rijn, L. C. (1984b). “Sediment transport. II: Suspended load transport.” Journal of Hydraulic Engineering, ASCE, 110(11), 1613–1641.
Van Rijn, L. C. (1987). “Mathematical modeling of morphological processes in the case of suspended sediment transport.” PhD dissertation, Delft University of Technology, Delft, The Netherlands.
Velikanov, M. A. (1954). “Principle of the gravitational theory of the movement of sediments.” Academy of Science Bulletin, USSR, Geophysics Series, (4), 349–359 (GTS Translation 62-15004).
Vetter, M. (1987). “Der Transport suspendierter Feststoffe in offenen Gerinnen.” Mitteilungen Institut für Wasserwesen, Rep. 19, University of the German Federal Army, Munich (in German).
Vetter, M. (1988). “Gesamttransport von Sedimenten in offenen Gerinnen.” Mitteilungen Institut für Wasserwesen, Rep. 26, U.S. Bureau of Reclamation, translator, University of the German Federal Army, Munich (in German).
Walling, D. E. (1977). “Assessing the accuracy of suspended sediment rating curves for a small basin.” Water Resources Research, 13(3), 531–538.
White, W. R., and Day, T. J. (1982). “Transport of graded gravel bed materials.” Gravel-bed rivers, Hey R.D. et al., eds., Wiley Interscience, New York.
White, W. R., Milli, H., and Crabbe, A. D. (1975). “Sediment transport theories: A review.” Proceedings of the Institute of Civil Engineers, London, Part 2 (59), 265–292.
Wilcock, P. R. (1997). “A method for predicting sediment transport in gravel-bed rivers.” Report to the U.S. Forest Service, Rocky Mountain Forest and Range Experiment Station, Stream Systems Technology Center, Fort Collins, Colo.
Wilcock, P. R. (1998). “Two-fraction model of initial sediment motion in gravel-bed rivers.” Science, 280, 410–412.
Wilcock, P. R. (2001. “Toward a practical method for estimating sediment transport rates in gravel-bed rivers.” Earth Surface Processes and Landforms, 26, 1395–1408.
Williams, G. P., and Rosgen, D. L. (1989). “Measured total sediment loads (suspended loads plus bedloads) for 93 United States streams.” Open-File Report 89-67, U.S. Geological Survey, Reston, Va., <http://pubs.er.usgs.gov/pubs/ofr/ofr8967> (Oct. 6, 2005).
Wren, D. G., and Kuhnle, R. A. (2003). “Surrogate techniques for suspended-sediment measurements.” Proc., Subcommittee on Sedimentation’s Turbidity and Other Sediment Surrogates Workshop, <http://water.usgs.gov/osw/techniques/turbidity.html> (Oct. 6, 2005).
Wuhan Institute of Hydraulic and Electric Engineering (WIHEE). (1961). River dynamics, Wuhan Institute of Hydraulic and Electric Engineering, China Industrial Press, 60–63 (in Chinese).
Yalin, M. S. (1963). “An expression for bed-load transportation.” Journal of the Hydraulics Division, ASCE, 89(HY3), 221–250.
Yalin, M. S. (1972). Mechanics of sediment transport, Pergamon, Tarrytown, N.Y.
Yang, C. T. (1973). “Incipient motion and sediment transport.” Journal of the Hydraulics Division, ASCE, 99 (HY10), 1670–1704.
Yang, C. T. (1979). “Unit stream power equations for total load.” Journal of Hydrology, 40, 123–138.
Yang, C. T. (1984). “Unit stream power equation for gravel.” Journal of Hydraulic Engineering, ASCE, 110(HY12), 1783–1797.
Yang, C. T. (1996). Sediment transport: Theory and practice, McGraw-Hill, New York.
Yang, C. T. (2005). “Sediment transport and stream power.” International Journal of Sediment Research, 17(1), 31–18.
Yang, C. T., and Huang, C. (2001). “Applicability of sediment transport formulas.” International Journal of Sediment Research, 16(3), 335–343.
Yang, C. T., Molinas, A., and Wu, B. (1996). “Sediment transport in the Yellow River.” Journal of Hydraulic Engineering, ASCE, 122(5), 237–244.
Yang, C. T., and Simões, F. J. M. (2005). “Wash load and bed-material load transport in the Yellow River.” Journal of Hydraulic Engineering, ASCE, 131(5), 413–418.
Yang, C. T., and Wan, S. (1991). “Comparisons of selected bed material load formulas.” Journal of Hydraulic Engineering, ASCE, 117(8), 973–989.
Young, C. A., and Tidwell, V. C. (2005). “Breakout session III, Bed-material and bed-topography measurement: Data needs, uncertainty, and new technologies.” Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop, Gray J.R., ed., Circular 1276, U.S. Geological Survey, Reston, Va., 29–35, <http://water.usgs.gov/pubs/circ/2005/circ1276/> (Oct. 6, 2005); Appendix 4 is available only online, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate2003workshop/listofpapers.html> (Oct. 6, 2005).
Zhang, R. (1959). “A study of the sediment transport capacity of the Middle and Lower Yangtze River.” Journal of Sediment Research, Beijing, 4(2) (in Chinese).
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 1067 - 1088
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.