Back Matter
Publication: Numerical Methods in Structural Mechanics
Formats available
You can view the full content in the following formats:
Bibliography
1.
Allman, D. J.: A Compatible Triangular Element Including Vertex Rotations for Plane Elasticity Problems, Computers & Structures, 19, 1–8, 1984.
2.
Allman, D. J.: A Quadrilateral Finite Element Including Vertex Rotations for Plane Elasticity Problems, Int. J. Num. Meth. Engng., 26, 717–739, 1988.
3.
Altiero, N. J., Sikarskie, D. L.: A Boundary Integral Method Applied to Plates of Arbitrary Plan Form. Computers and Structures, 9, 1978.
4.
Babuška, I., Door, M. R.: Error Estimates for the Combined h and p-Version of the Finite Element Method, Numer. Math., 34, 41–62, 1980.
5.
Babuška, I., Miller, A.: The Post-Processing Approach in the Finite Element Method&Part 3: A Posteriori Error Estimate and Adaptive Mesh Selection, Int. J. Numer. Meth. Engng., 20, 2311–2324, 1984.
6.
Babuška, I., Rank, E.: An Expert-System Like Feedback Approach in the hp-Version of the Finite Element Method, FE Anal. Des., 3, 127–147, 1987.
7.
Bäcklund, J.: Finite Element Analysis of Nonlinear Structures (PhD Dissertation), Goteborg 1973.
8.
Baehmann, P. L., Shepard, M. S.: A Posteriori Error Estimation for Triangular and Tetrahedral Quadratic Elements Using Interior Residuals. SCOREC Report 14–1990, RPI, Troy, 1990.
9.
Baehmann, P. L., Wittchen, S. L., Shepard, M. S., Grice, K. R., Yerry, M. A.: Robust, Geometrically Based Two-Dimensional Mesh Generation, Int. J. Numer. Meth. Engng., 24, 1043–1078, 1987.
10.
Bakalíková, D.: Stability of Ribbed Shells, (PhD Dissertation), FSv TU, Bratislava, 1988.
11.
Banerjee, P. K., Butterfield, R.: Boundary Elements in Engineering Science. Mc-Graw Hill, London 1981.
12.
Bathe, K. J.: Finite Element Procedures in Engineering Analysis. Prentice-Hall, Englewood Cliffs, NJ, 1982.
13.
Bathe, K. J., Dvorkin, E. N.: On the Automatic Solution of Nonlinear Finite Element Equations, Computers & Structures, 17, 871–879, 1983.
14.
Bathe, K. J., Dvorkin, E. N.: A Formulation of General Shell Elements&the Use of Mixed Interpolation of Tensorial Components, Int. J. Num. Meth. in Engng., 22, 697–722, 1986.
15.
Bathe, K. J., Dvorkin, E. N.: A Four-Node Plate Bending Element Based on Mindlin-Reissner Plate Theory and a Mixed Interpolation, Int. J. Num. Meth. in Engng., 21, 367–3383, 1986.
16.
Bathe, K. J., Wilson, E. L.: Large Eigenvalue Problems in Dynamic Analysis, J. Engng. Mech. Div. ASCE, 1972.
17.
Bathe, K. J., Wilson, E. L.: Numerical Methods in Finite Element Analysis. Prentice-Hall, Englewood Cliffs, NJ, 1976.
18.
Batoz, J. L., Bathe, K. J., Ho, L. W.: A Study of Three-Node Triangular Plate Bending Elements, Int. J. Num. Meth. in Engng., 15, 1771–1812, 1986. 1980.
19.
Batoz, J. L., Dhatt, G.: Incremental Displacement Algorithmus for Non-linear Problems, Int. J. Num. Meth. Engng., 14, 1262–1266, 1979.
20.
Bažant, Z. P. ed.: Mathematical Modeling of Creep and Shrinkage of Concrete. John Wiley & Sons Ltd., New York, 1988.
21.
Bažant, Z.P., Cedolin, L.: Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories. Oxford University Press, New York, 1991.
22.
Bažant, Z. P., Lin, F. B.: Nonlocal Smeared Cracking Model for Concrete Fracture, J. Struct. Engng. (ASCE), 114 (11), (Sec. 3.10), 1988.
23.
Bažant, Z. P., Liu, K. L.: Random Creep and Shrinkage in Structures: Sampling, J. Struct. Engng., 5, 1113–1134, 1985.
24.
Bažant, Z. P., Wu, S. T.: Dirichlet Series Creep Function for Aging Concrete, J. Engng. Mech. Div., ASCE, 99 (EM2), 1973.
25.
Bellini, P. X., Chulya, A.: An Improved Automatic Incremental Algorithm for the Efficient Solution of Nonlinear Finite Element Equations, Computers & Structures, 26, 99–110, 1987.
26.
Belytschko, T., Fish, J., Engelmann, B. E.: A Finite Element with Embedded Localization Zones. In: Computer Methods in Applied Mechanics and Engineering 70, North-Holland, Amsterdam, 1988.
27.
Belytschko, T., Lasry, D.: Nonmonotonic Stress-Strain Laws: Bizarre Behavior and its Repercussions on Numerical Solutions. Transactions of the Sixth Army Conference on Applied Mathematics and Computing, ARD Report 89-1.
28.
Belytschko, T., Lasry, D.: A Fractal Patch Test, Int. J. Num. Meth. Engng., 26, 2199–2210, 1988.
29.
Bergan, P. G.: Solution Algorithms for Non-linear Structural Problems, Computers & Structures, 12, 497–509, 1980.
30.
Bergan, P. G., Felippa, C. A.: A triangular membrane element with rotational degrees of freedom, Comp. Methods Appl. Mech. Engng., 50, 25–69, 1985.
31.
Bittnar, Z., Patzák, B.: Dynamic Analysis of Curved Folded Plates using Finite Strip with Independent Rotation Fields. In: Structural Dynamics&Eurodyn’93, eds. Moanet al., Rotterdam, 569–572, 1990.
32.
Bittnar, Z., Řeřicha, P.: Finite Element Method in Structural Dynamics (in Czech). SNTL, Praha, 1981.
33.
Bittnarová, J.: State of Stress in Shear-Wall Structural Systems and Their Interaction with Subgrade (in Czech). Report Faculty of CE, CTU, Praha 1979.
34.
de Borst, R.: Non-linear Analysis of Frictional Materials (PhD Dissertation), Delft University of Technology, Delft, 1986.
35.
de Borst, R.: A Generalization of J2-Flow Theory for Polar Continua, Comp. Meth. Appl. Mech. Eng, 103, 347–362, 1993.
36.
de Borst, R., Mühlhaus, H. B.: Gradient-Dependent Plasticity. Formulation and Algorithmic Aspects, Int. J. Num. Meth. Eng., 35, 521–539, 1992.
37.
Brebbia, C. A.: The Boundary Element Method for Engineers. Pentech Press, London, 1978.
38.
Brebbia, C. A., Nardini, D.: Dynamic Analysis in Solid Mechanics by Alternative Boundary Element Approach, Int. J. Soil Dynamics and Earthquake Engng., 2, 1983.
39.
Brebbia, C. A., Telles, J. C. F., Wrobel, L. C.: Boundary Element Techniques. Springer, Berlin, 1984.
40.
Brož, P., Procházka, P.: Boundary Element Method in Engineering Practice (in Czech). SNTL, Praha, 1987.
41.
Brož, P., Procházka, P.: Solution of Nonlinear Problems of Mechanics Using the Boundary Element Method (in Czech). Grada Publishing, Praha, 1995.
42.
Carlslaw, H. S., Jaeger, J. C.: Conduction of Heat in Solids, 2nd ed. Oxford University Press, London, 1959.
43.
Chen, W. F.: Plasticity in Reinforced Concrete. McGraw-Hill, New York, 1982.
44.
Chen, H. C., Taylor, R. Z.: Solution of Viscously Damped Linear Systems Using a Set of Load-Dependent Vectors, Earthquake Engng. Struct. Dyn., 19, 653–665, 1990.
45.
Cheung, Y. K.: Finite Strip Method Analysis of Elastic Slabs, Proc. A.S.C.E., 94, 1365–1378, 1968.
46.
Cheung, Y. K.: Folded Plate Structures by Finite Strip Method, Proc. A.S.C.E., 96, 2963–2979, 1969.
47.
Červenka, V., Eligehausen, R., Pukl, R.: SBETA, Computer Program for Nonlinear Finite Element Analysis of Reinforced Concrete Structures. Mitteilungen IWB, Stuttgart, 1990/1.
48.
Collatz, L.: Eigenvalue Problems with Technical Applications (Czech edition). SNTL, Praha, 1965.
49.
Crisfield, M. A.: Accelerating and Damping the Modified Newton-Raphson method, Compters & Structures, 18, 395–407, 1984.
50.
Crisfield, M. A.: Non-linear Finite Element Analysis of Solids and Structures. John Wiley & Sons, London, 1991.
51.
Crisfield, M. A., Wills, J.: Solution Strategies and Softening Materials, Comp. Meth. Appl. Mech. & Engng., 66, 267–289, 1988.
52.
Darwin, D., Pecknold, D. A. W.: Analysis of Cyclic Loading of Plane RIC Structures, Computers & Structures, 7, 137–147, 1977.
53.
Decker, D. W., Keller, H. B.: Solution Branching&A Constructive Technique. In: New Approaches to Nonlinear Problems in Dynamics (ed. Holmes P. J.), SIAM, Philadelphia, PA, 1980.
54.
Delpak, R., Peshkam, V.: A Study of the Influence of Hierarchical Modes on the Performance of Selected Parametric Elements, Int. J. Num. Meth. Engng., 22, 153–171, 1986.
55.
Demidovich, B. P., Maron, I. A.: Osnovy Vycislitelnoi Matematiki, Moskva, 1963.
56.
Dhatt, G.: Numerical Analysis of Thin Shells by Curved Triangular Elements Based on Discrete Kirchhoff Hypothesis. Proc. ASCE, Symp. on Applications of FEM in Civil Engineering, Vanderbilt Univ., Nashville, Tenn., 13–14, 1969.
57.
Dvorak, G. J.: Transformation Field Analysis of Inelastic Composite Materials. Proc. R. Soc. Lond., A 437, 311–327, 1992.
58.
Dvorak, G. J., Procházka, P.: Thick-Walled Composite Cylinders With Optimal Fiber Prestress. Submitted to Composite Engineering.
59.
Eringen A. C.: Nonlinear Theory of Continuous Media. McGraw-Hill, New York, 1962.
60.
Eshelby, J. D.: The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems. J. Mech. Phys. Solids, A 241, 376–396, 1957.
61.
Fadeev, D. K., Fadeeva, V. N.: Vycislitelnye Metody Lineinoi Algebry. Fizmatgiz, Moskva, 1960.
62.
Feda, J.: Mechanics of the Particulate Materials, Elsevier-Academia, Amsterdam, 1982.
63.
Florián, A.: Statistical Dependence between Input Quantities in Statistical Analysis of Computational Models (in Czech). Building J., 37, 12, 895–906, 1989.
64.
Gospodinov, G., Ljutskanov, D.: The Boundary Element Method Applied to Plates. Appl. Math. Modelling, Vol. 6, August 1982.
65.
Grafton, P. E., Strome, D. R.: Analysis of Axisymmetric Shells by the Direct Stiffness Method, J.A.I.A.A., 2342–2347, 1963.
66.
Green A. E., Zerna W.: Theoretical Elasticity. Oxford University Press, London, 1968.
67.
Gui, W., Babuška, I.: The h, p and h – p Versions of the Finite Element Method in 1 Dimension: Part 1: The Error Analysis of the p-Version, Numer. Math., 49, 577–612, 1986.
68.
Gui, W., Babuška, I.: The h, p and h – p Versions of the Finite Element Method in 1 Dimension: Part 2: The Error Analysis of the h and h – p Versions, Numer. Math., 49, 659–683, 1986.
69.
Hanuška, A.: On the Westergaard Theory of Reinforced Subgrade (in Czech), Building J., 39, 2, 1989.
70.
Hashin, Z., Shtrikman, S.: On Some Variational Principles in Anisotropic and Non-homogeneous Elasticity, J. Mech. Phys. Solids, 10, 335–342, 1963.
71.
Hashin, Z., Shtrikman, S.: A Variational Approach to the Theory of the Elastic Behavior of Multi-phase Materials, J. Mech. Phys. Solids, 11, 127–140, 1963.
72.
Herrmann, L. R.: Finite Element Bending Analysis for Plates, J. Engng. Mech. Div. ASCE, EM5, 1967.
73.
Hill, R.: The Mathematical Theory of Plasticity, Oxford University Press, New York, 1950.
74.
Hill, R.: A General Theory of Uniqueness and Stability in Elastic-Plastic Solids, J. Meth. Phys. Solids, 6, 236–249, 1958.
75.
Hinton, E., Owen, D. R. J.: Finite Element Software for Plates and Shells. Pineridge Press, Swansea, 1984.
76.
Hinton, E., Rock, T., Zienkiewicz, O. C.: A Note on Mass Lumping and Related Processes in the Finite Element Method, Int. J. Earthq. Engng. Struct. Dyn., 4, 245–249, 1976.
77.
Holický, M.: Fuzzy Concept of Serviceability Limit States. In: Symp. Workshop on Serviceability of Buildings, Canada-Ottawa, 19–31, 1988.
78.
Holzer, S., Rank, E., Werner, H.: An Implementation of the hp-Version of the Finite Element Method for Reissner-Mindlin Plate Problems, Int. J. Num. Meth. Engng., 30, 459–471, 1990.
79.
Huang, H. C.: Elastic and Elasto-Plastic Analysis of Shell Structures Using the Assumed Strain Elements, Computers & Structures, 33, 327–335, 1989.
80.
Hughes, T. J. R.: The Finite Element Method. Prentice-Hall, Englewood Cliffs, NJ, 1987.
81.
Hughes, T. J. R., Brezzi, F.: On Drilling Degrees of Freedom, Comp. Methods Appl. Mech. Engng., 72, 105–121, 1989.
82.
Hughes, T. J. R., Tezduyar, T. E.: Finite Elements Based Upon Mindlin Plate Theory with Particular Reference to the Four-Node Bilinear Isoparametric Element, J. Appl. Mech. ASME, 46, 587–596, 1981.
83.
Hurty, W., Rubinstein, M. F.: Dynamics of Structures. Prentice-Hall, Englewood Cliffs, NJ, 1964.
84.
Huseyin, K.: Nonlinear Theory of Elastic Stability. Noordhoff, Leyden, 1975.
85.
Ibrahimbegovic, A., Chen, H. C., Taylor, L. R., Wilson, E. L.: Ritz Method for Dynamic Analysis of Large Discrete Linear Systems with Non-proportional Damping, Earthquake Engng. Struct. Dyn., 19, 877–889, 1990.
86.
Ibrahimbegovic, A., Taylor, R. L., Wilson, E. L.: A Robust Membrane Quadrilateral Element with Drilling Degrees of Freedom, Int. J. Num. Meth. Engng., 30, 445–457, 1990.
87.
Ibrahimbegovic, A., Wilson, E. L.: A Methodology for Dynamic Analysis of Linear Structure-Foundation Systems with Local Non-linearities, Earthquake Engng. Struct. Dyn., 19, 1197–1208, 1990.
88.
Ibrahimbegovic, A., Wilson, E. L.: Thick Shell and Solid Finite Elements with Independent Rotation Fields, Int. J. Num. Meth. Engng., 31, 1393–1414, 1991.
89.
Irons, B. M.: Quadrature Rules for Brick Based Finite Elements, Int. J. Num. Meth. Engng., 3, 293–294, 1971.
90.
Irons, B. M., Razzaque, A.: Experience with the Patch Test for Convergence of Finite Element Methods, In: Mathematical Foundations of the Finite Element Method (ed. Aziz A. K.), Academic Press, New York, 1982.
91.
Ishlinskii, I. U.: General Theory of Plasticity with Linear Strain Hardening (in Russian), Ukr. Mat. Z., 6, 1954.
92.
Jawson, M. A., Maiti, M.: An Integral Wquation Formulation of Plate Bending Problems. Journal of Engng. Meth., 2, 1968.
93.
Jendele, L.: Nonlinear Analysis of Reinforced Concrete Structures (in Czech, PhD Dissertation), KI CTU, Praha, 1989.
94.
Jennings, A.: Matrix Computations for Engineers and Scientists. John Wiley, London, 1977.
95.
Jeusette, J.-P., Laschet, G., Idelsohn, S.: An Effective Automatic Incremental/Iterative Method for Static Nonlinear Structural Analysis, Computers & Structures, 32, 125–135, 1989.
96.
Kafka, V.: Inelastic Mezomechanics. World Scientific Publishing, Volume 5, Singapore, 1987.
97.
Kelly, D. W., Gago, R., Zienkiewicz, O. C., Babuška, I.: A-posteriori Error Analysis and Adaptive Processes in the Finite Element Method. Part 1: Error Analysis, Int. J. Numer. Meth. Engng., 19, 1593–1619, 1983.
98.
Kohout, M., Bílek, Z., Hřebíček, J., Polcar, P.: Application of Damage Mechanics to Numerical Fracture Simulation. Acta Technica, 34, 5, 1989.
99.
Koiter, W. T.: On the Stability of Elastic Equilibrium (Engl. transl). AFFDL, 1970.
100.
Kolář, V.et al: Berechnung von Flächen- und Raumtragwerken nach der Methode der finiten Elemente. Springer Verlag, New York, 1975.
101.
Kolář, V., Němec, I.: Modelling of Soil-Structure Interaction. Academia, Elsevier, Amsterdam, 1990.
102.
Kolář, V., Němec, I.: Contact Stress and Settlement in the Structure-Soil Interface. Academia Praha, 1991.
103.
Křístek, V.: Theory of Box Girders. John Wiley & Sons., Chichester, 1979.
104.
Krohn, R.: Berechnung Statisch Unbestimmter Fachwerktraeger, Zeitschrift Arch. und Ing. Ver., Hannover, 1984.
105.
Kuklík, P.: A Contribution to the Solution of a Layered Subgrade (in Czech), Pozemní stavby, 7, 1984.
106.
Lee, S. H.: Rudimentary Considerations for Effective Quasi-Newton Updates in Nonlinear Finite Element Analysis, Computers & Structures, 33, 463–476, 1989.
107.
Lekhnitski, S. G.: Theory of Elasticity of an Anisotropic Elastic Body. Holden Day, San Francisco, 1963.
108.
Lekhnitski, S. G.: Anisotropic Plates. Gordon and Breach Science Publishers, New York, 1968.
109.
Levin, I. M.: Determination of Composite Material Elastic and Thermoelastic Constants, Izd. AN SSSR, Mekhanika Tverdogo Tela, 11, 6, 137–145, 1976.
110.
Liu, W. K., Belytschko, T., Mani, A.: Random Field Finite Elements, Int. J. Num. Meth. Engng., 23, 1831–1845, 1986.
111.
Liu, W. K., Besterfield, G. H., Belytschko, T.: Variational Approach to Probabilistic Finite Elements, J. Engng. Mech., Vol.114, 12, 2115–2133, 1988.
112.
MacNeal, R. H., Harder, R. L.: A Refined Four-Noded Membrane Element with Rotational Degrees of Freedom, Computers & Structures, 18, 75–84, 1988.
113.
Maier, G., Novati, G., Sirtori, S.: Symmetric Formulation of an Indirect Boundary Element Method for Elastic-plastic Analysis and Relevant Extremum Properties. Pergamon Press, Toronto, 1988.
114.
Malone, J. G., Plunkett, R., Hodge, P. G. Jr.: An Elastic-Plastic Finite Element Solution for a Cracked Plate. In: Finite Elements in Analysis and Design 2, Elsevier Science Publishers B.V., North-Holland, Amsterdam, 1986.
115.
Malvern, L. E.: Introduction to the Mechanics of Continuous Medium. Prentice-Hall, Englewood Cliffs, NJ, 1969.
116.
Marquis, D.: Modélisation et Identification de l’Écrouissage Anisotrope des Métaux, Thèse, Université Paris, 1979.
117.
Matsumoto, T., Yuuki, R.: Accurate Boundary Element Analysis of Two-dimensional Elasto-plastic Problems. In: Boundary Element Methods in Applied Mechanics. Pergamon Press, Toronto, 1988.
118.
Melosh R. J.: Structural Engineering Analysis by Finite Elements. Prentice-Hall, London, 1990.
119.
Mittelman, H. D., Weber, H.: Numerical Methods for Bifurcation Problems-a Survey and Classification. In: Bifurcation Problems and Their Numerical Solution (eds. Mittelman H. D. and Weber H.), Birkhauser, Basel, 1980.
120.
Moreau, J. J., Panagiotopoulos, P. D., Strang, G.: Topics in Nonsmooth Mechanics. Birhäuser Verlag, Berlin, 1988.
121.
Mühlhaus, H. B., Aifantis, E. C.: A Variational Principle for Gradient Plasticity, Int. J. Solids Structures, 28, 845–857, 1991.
122.
Muskhelishvili, N. I.: Some Basic Problems of the Mathematical Theory of Elasticity. Noordhoff, Croningen, 1963.
123.
Newmark, N. M.: A Method of Computation for Structural Dynamics, J. Engng. Mech. Div. ASCE, 85, 67–94, 1959.
124.
Nour-Omid, B., Clough, R. W.: Dynamic Analysis of Structures Using Lanczos Coordinates, Earthquake Engng. Struct. Dyn., 12, 566–577, 1984.
125.
Novák, D., Teplý, B. Estimation of Structural Failure Probability. In: European Conference on New Advances in Computational Structural Mechanics. France-Giens (Var), 1991.
126.
Oden, J. T., Reddy, J. N.: Variational Methods in Theoretical Mechanics. Springer Verlag, Berlin, 1976.
127.
Onate, E., Suarez, B.: A Unified Approach for the Analysis of Bridges, Plates and Axisymmetric Shells Using the Linear Mindlin Strip Elements, Computers & Structures, 17, 407–426, 1983.
128.
Onate, E., Suarez, B.: A Comparison of the Linear Quadratic and Cubic Mindlin Strip Elements for the Analysis of Thick and Thin Plates, Computers & Structures, 17, 427–439, 1983.
129.
Ondráček, E., Valentík, V.: Dynamical States in Complicated Bodies, Colloquium on Solid States Properties at High Loading Rates, Brno, 1978.
130.
Pamin, J. K.: Gradient-dependent Plasticity in Numerical Simulation of Localization Phenomena, PhD Thesis, Delft University Press, 1994.
131.
Park, K. C.: A Family of Solution Algoritms for Nonlinear Structural Analysis Based on the Relaxation Equations, Int. J. Num. Meth. Engng., 18, 1337–1347, 1982.
132.
Parlett, B. N.: The Symmetric Eigenvalue Problem, Prentice-Hall, Englewood, Cliffs, NJ, 1980.
133.
Pian, T. H. H.: Finite Element Methods bz Variational Principles with Relaxed Continuity Requirements. In: Variational Methods in Engineering, Vol.1, 3/1–3/24, Southampton University Press, 1973.
134.
Pluhař, M.: Nonlinear Analysis of Slender Structures Using Perturbation Method (in Czech), Building J., 38, 12, 1990.
135.
Polizzotto, C., Zito, M.: A Variational Approach to Boundary Element Methods. In: Boundary Element Methods in Applied Mechanics, Pergamon Press, Toronto, 1988.
136.
Prager, W.: Recent Developments in the Mathematical Theory of Plasticity, J. Appl. Mech., 20, 1949.
137.
Prager, W.: The Theory of Plasticity: A Survey of Recent Achievements, Proc. Instn. Mech. Engrs. 169, 1955.
138.
Procházka, P., Šejnoha, J.: Behavior of Composites on Bounded Domain (to be published in Boundary Element Communication).
139.
Procházka, P., Šejnoha, J.: Optimization of Structures Using Transformation Field Analysis. Structural Optimization (Opti’ 95), eds. Hernandez, El-Sayed, Brebbia. Comp. Mech. Publ., Southampton, Boston, 27–34, 1995.
140.
Ramm, E.: The Riks/Wempner Approach&an Extension of the Displacement Control Method in Non-linear analysis. In: Non-linear Computational Mechanics (ed. Hinton E.et al.), Pineridge Press, Swansea, 1982.
141.
Rank, E., Babuška, I.: An Expert System for the Optimal Mesh Design in the hp-Version of the Finite Element Method, Int. J. Num. Meth. Engng., 24, 2087–2106, 1987.
142.
Rees, D. W. A.: On Isotropy and Anisotropy in the Theory of Plasticity, Proc. R. Soc. Lond., A383, 1982.
143.
Reissner, E.: A Note on Variational Principles in Elasticity, Int. J. Solids Struct., 1, 93–95, 1965.
144.
Rice, J. R.: A Path-Independent Integral and the Appropriate Analysis of Strain Concentration by Notches and Cracks, J. Appl. Mech., 35, 1968.
145.
Rice, J. R.: The Localization of Plastic Deformation in Theoretical and Applied Mechanics. In: 14th Congr. Theoret. Appl. Mech. (ed. Koiter W. T.), North-Holland, Amsterdam, 1977.
146.
Riks, E.: The Application of Newton’s Method to the Problem of Elastic Stability, J. Appl. Mech., 39, 1060–1066, 1972.
147.
Řeřicha, P.: A Shell Element for Transient Dynamic Loading (in Czech). Report Klokner’s Institute CTU 314/75, Praha, 1975.
148.
Rudnicki, J. W., Rice, J. R.: Conditions for the Localization of Deformation in Pressure-Sensitive Dilatant Materials, J. Mech. Phys. Solids, 13, 371–394, 1975.
149.
Scheaffer, R. L., McClave, J. T.: Probability and Statistics for Engineers, 2nd ed., Duxbury Press, Boston, 1986.
150.
Schueller, G. I., Bucher, C. G., Bourgund, U., Quypornprasert, W.: On Efficient Computational Schemes to Calculate Structural Failure Probabilities, Probabilistic Engineering Mechanics, 4(1), 10–18, 1989.
151.
Shen, C. H., Roeck, G., Laethem, M., Geyskens, P.: Multi-level Substructuring and an Experimental Self-adaptive Newton-Raphson Method for Two-dimensional Nonlinear Analysis, Computers & Structures, 33, 489–497, 1989.
152.
Shield, R. T., Ziegler, H.: On Prager’s Hardening Rule, Z. Ang. Math, and Phys., 9a, 1958.
153.
Simo, J. C.: A Framework for Finite Strain Elastoplasticity Based on the Multiplicative Decomposition and Hyperelastic Relations; Part I: Formulation, Comp. Methods Appl. Mech. Engng., 66, 199–219, 1988.
154.
Simo, J. C.: A Framework for Finite Strain Elastoplasticity Based on the Multiplicative Decomposition and Hyperelastic Relations; Part II: Computational Aspects, Comp. Methods Appl. Mech. Engng., 66, 1–31, 1988.
155.
Simo, J. C., Wriggers, P., Schweizerhof, K. H., Taylor, R. L.: Finite Deformation Postbuckling Analysis Involving Inelasticity and Contact Constraints. In: Innovative Methods for Nonlinear Problems (ed. Liu W. K.et al.), Pineridge Press, Swansea, 365–388, 1984.
156.
Simon, H. D.: The Lanczos Algorithm with Partial Reorthogonalization, Math. Comput. 42, 115–142, 1984.
157.
Sirtori, S.: General Stress Analysis Methods by Means of Integral Equations and Boundary Elements, Meccanica, 14, 210–218, 1979.
158.
Sládek, V., Sládek, J.: Two Approaches to Solution of Elastodynamic Problems Using Boundary Element Formulations, Acta Technica SAV, 32, 1, 1987.
159.
Spence, A., Jepson, A. D.: Folds in the Solution of Two Parameter Systems and Their Calculation. Part I, SIAM, J. Numer. Anal., 22, 347–368, 1985.
160.
Stolarski, H., Belytschko, T., Carpenter, N., Kennedy, J. M.: A Simple Triangular Curved Shell Element, Eng. Comput., Vol. 1, September 1985.
161.
Šejnoha, J.: Vibration of Box Structures (in Czech), Building J., 6, 1970.
162.
Šejnoha, J.: A Stochastic Model of Shear-Wall Systems (in Czech), Acta Polytechnica CTU, 18, 7, 35–41, 1982.
163.
Šejnoha, J., Bittnarová, J., Blažek, V., Kalousková, M.: Mathematical Models for a Dynamic Analysis of Tall Buildings, Building Journal, 38, 2, 1990.
164.
Šejnoha, J., Jirásek, M.: Generalized Theory of Thin-Walled Beams. Proc. of the International Conference on Lightweight Structures in CE, 414–420, Warsaw, 1995.
165.
Šejnoha, J., Procházka, P., Feraidon, A.: Reliability-based Design of Composite Cylinders and Plates. Int. Conf. on Lightweight Structures in Civil Engng., Warsaw, 1995.
166.
Taylor, R., Simo, J. C., Zienkiewicz, O. C., Chan, A.: The Patch Test&a Condition for Assessing FEM Convergence, Int. J. Num. Meth. Engng., 22, 39–62, 1986.
167.
Telles, J. C. F., Brebbia, C. A.: Elastoplastic Boundary Element Analysis in Structural Mechanics, Ruhr-Universitat Bochum, 1980.
168.
Telles, J. C. F., Brebbia, C. A. On the Application of the Boundary Element Method to Plasticity, appl. Math. Modelling, 3, 466–470, 1981.
169.
Timoshenko, S., Goodier, J. N.: Theory of Elasticity (2nd ed.). McGraw-Hill, New York, 1959.
170.
Tottenham, H.: The Boundary Method for Plates and Shells. In: Developments in BEM. Red. Banerjee P. K., Butterfield R. London, Applied Science Publishers Ltd. 1979.
171.
Truesdell, C.: The Mathematical Foundations of Elasticity and Fluid Dynamics, J. Rational Mech. and Analysis, 1, 3, 1952.
172.
Truesdell, C.: The Mathematical Foundations of Elasticity and Fluid Mechanics. Gordon and Breach Science Publishers, Inc., New York, 1966.
173.
Turner, M. J., Clough, R. W., Martin, H.C., Topp, L. J.: Stiffness and Deflection Analysis of Complex Structures, J. Aeronaut. Sci, 23, 1956.
174.
Washizu, K.: Variational Methods in Elasticity and Plasticity. Pergamon Press, New York, 1975.
175.
Wempner, G. A.: Discrete Approximations Related to Nonlinear Theories of Solids, Int. J. Solids & Structs., 7, 1581–1599, 1971.
176.
Willam, K. J., Etse, G.: Failure Assessment of the Extended Leon Model for Plain Concrete, Proc. Second Int. Conf. Computer Aided Analysis and Design of Concrete Structures, Eds. Bićanićet al., Pineridge Press, Swansea, 851–870, 1990.
177.
Willis, J. R.: Bounds and Self-consistent Estimates for the Overall Properties of Anisotropic Composites. J. Mech. Phys. Solids, 25, 185–202, 1977.
178.
Wilson, E. L.: Structural Analysis of Axisymmetric Solids, J.A.I.A.A., 3, 2269–2274, 1965.
179.
Wriggers, P., Simo, J. C.: A General Procedure for the Direct Computation of Turning and Bifurcation Points, Int. J. for Numer. Meth. Engng., 30, 155–176, 1990.
180.
Zareckijlu, K.: Teoria uprugosti gruntov. Nauka, Moskva, 1967.
181.
Zienkiewicz, O. C.: Basic Formulation of Static and Dynamic Behaviour of Soil and Other Porous Media. Institute for Numerical Methods in Engineering, University College of Swansea, 1983.
182.
Zienkiewicz, O. C., Taylor, R. L.: The Finite Element Method-4th ed. Vol. 1: Basic Formulation and Linear Problems. McGraw-Hill, London, 1994.
183.
Zienkiewicz, O. C., Taylor, R. L.: The finite element method-4th ed. Vol. 2: Solid and fluid mechanics. Dynamics and non-linearity. McGraw-Hill, London, 1994.
184.
Zienkiewicz, O. C., Zhu, J. Z.: A Simple Error Estimator and Adaptive Procedure for Practical Engineering Analysis, Int. J. Numer. Meth. Engng., 24, 337–357, 1987.
185.
Zienkiewicz, O. C., Zhu, J. Z.: Error Estimates and Adaptive Refinement for Plate Bending Problems, Int. J. Numer. Meth. Engng., 28, 2839–2853, 1989.
Information & Authors
Information
Published In
Numerical Methods in Structural Mechanics
Pages: 397 - 407
History
Published online: Mar 21, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.