Closure to “Out-Plane Elastic-Plastic Buckling Strength of High-Strength Steel Arches” by Mark Andrew Bradford, Yong-Lin Pi, and Airong Liu
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Structural Engineering
Volume 146, Issue 2
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been supported by research grants from the Australian Research Council through Discovery Project No. DP150100446 and from the National Natural Science Foundation of China (No. 51678169) and the Technology Planning Project of Guangdong Province (Grant No. 2016B050501004).
References
AISC. 2015. Specification for structural steel buildings. ANSI/AISC 360-10. Chicago: AISC/AISC.
Ban, H. Y., G. Shi, Y. Bai, Y. Shi, and Y. Wang. 2013a. “Residual stress of 460 MPa high strength steel welded I-section: Experimental investigation and modeling.” Int. J. Steel Struct. 13 (4): 691–705. https://doi.org/10.1007/s13296-013-4010-1.
Ban, H. Y., G. Shi, Y. Shi, and M. A. Bradford. 2013b. “Experimental investigation of the overall buckling behaviour of 960 MPa high strength steel columns.” J. Constr. Steel Res. 88 (Sep): 256–266. https://doi.org/10.1016/j.jcsr.2013.05.015.
Bradford, M. A., and Y.-L. Pi. 2012. “A new analytical solution for lateral-torsional buckling of arches under axial uniform compression.” Eng. Struct. 41 (Aug): 14–23. https://doi.org/10.1016/j.engstruct.2012.03.022.
CEN (European Committee for Standardization). 2005. Design of steel structures, Part 1-1: General rules and rules for buildings. Eurocode 3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2007. Design of steel structures: Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700. Eurocode 3. Brussels, Belgium: CEN.
Pi, Y. L., and N. S. Trahair. 1992a. “Prebuckling deflections and lateral buckling. I: Theory.” J. Struct. Eng. 118 (11): 2949–2966. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(2949).
Pi, Y. L., and N. S. Trahair. 1992b. “Prebuckling deflections and lateral buckling. II: Applications.” J. Struct. Eng. 118 (11): 2967–2985. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:11(2967).
Pi, Y. L., and N. S. Trahair. 1994. “Nonlinear inelastic analysis of steel beam-columns. II: Applications.” J. Struct. Eng. 120 (7): 2062–2085. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:7(2062).
Pi, Y.-L., M. A. Bradford, and B. Uy. 2007. “A rational elasto-plastic spatially curved thin-walled beam element.” Int. J. Numer. Methods Eng. 70 (3): 253–290. https://doi.org/10.1002/nme.1873.
Pi, Y.-L., J. P. Papangelis, and N. S. Trahair. 1995. “Prebuckling deformations and flexural-torsional buckling of arches.” J. Struct. Eng. 121 (9): 1313–1322. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:9(1313).
Pi, Y.-L., and N. S. Trahair. 1998. “Out-of-plane inelastic buckling and strength of steel arches.” J. Struct. Eng. 124 (2): 174–183. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(174).
SIMULIA. 2013. Abaqus analysis user’s guide 6.13. Providence, RI: SIMULIA.
Trahair, N. S., M. A. Bradford, D. A. Nethercot, and L. Gardner. 2007. The behaviour and design of steel structures to EC3. 4th ed. Boca Raton, FL: CRC Press.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 5, 2019
Accepted: Jun 7, 2019
Published online: Dec 11, 2019
Published in print: Feb 1, 2020
Discussion open until: May 11, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.