Discussion of “Out-Plane Elastic-Plastic Buckling Strength of High-Strength Steel Arches” by Mark Andrew Bradford, Yong-Lin Pi, and Airong Liu
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Structural Engineering
Volume 146, Issue 2
ST.1943-541X.0002495/asset/0f3e7221-f0ce-4eff-9ac2-5dbbd054862b/assets/(asce)st.1943-541x.0002495.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is supported by the National Natural Science Foundation of China (51578120 and 51178087) and the Scientific Research Foundation of the Nanjing Institute of Technology (YKJ201617).
References
Agüero, A., L. Pallares, and F. J. Pallares. 2015. “Equivalent geometric imperfection definition in steel structures sensitive to flexural and/or torsional buckling due to compression.” Eng. Struct. 96 (Aug): 160–177. https://doi.org/10.1016/j.engstruct.2015.03.065.
Ban, H. Y., G. Shi, Y. Bai, Y. Shi, and Y. Wang. 2013a. “Residual stress of 460 MPa high strength steel welded I-section: Experimental investigation and modeling.” Int. J. Steel Struct. 13 (4): 691–705. https://doi.org/10.1007/s13296-013-4010-1.
Ban, H. Y., G. Shi, Y. Shi, and M. A. Bradford. 2013b. “Experimental investigation of the overall buckling behaviour of 960 MPa high strength steel columns.” J. Constr. Steel Res. 88 (Sep): 256–266. https://doi.org/10.1016/j.jcsr.2013.05.015.
Bleich, F. 1952. Buckling strength of metal structures. New York: McGraw-Hill.
Galambos, T. V. 1996. Structural members and frames. Mineola, NY: Dover.
Kala, Z., and J. Valeš. 2017. “Global sensitivity analysis of lateral-torsional buckling resistance based on finite element simulations.” Eng. Struct. 134 (Mar): 37–47. https://doi.org/10.1016/j.engstruct.2016.12.032.
Liu, Y.-C., W.-F. Zhang, J. Ji, K.-S. Chen, S.-L. Deng, Y. Deng, and Y. Li. 2017. “Combined torsion theory and its finite element verification of I-beams with concrete-filled steel tube flanges of square section.” In Proc., 9th Int. Symp. on Steel Structures (ISSS-2017), 82–85. Seoul: Korean Society of Steel Construction.
Morris, O. 2007. “Three hundred years of bar theory.” J. Struct. Eng. 133 (12): 1686–1689. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:12(1686).
Onat, E. T., and D. C. Drucker. 1953. “Inelastic instability and incremental theories of plasticity.” J. Aeronaut. Sci. 20 (3): 181–186. https://doi.org/10.2514/8.2585.
Pi, Y.-L., and N. S. Trahair. 1998. “Out-of-plane inelastic buckling and strength of steel arches.” J. Struct. Eng. 124 (2): 174–183. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(174).
Timoshenko, S. P., and J. Gere. 1961. Theory of elastic stability. 2nd ed. New York: McGraw-Hill.
Trahair, N. S. 1993. Flexural-torsional buckling of structures. 1st ed. London: Chapman & Hall.
Trahair, N. S. 2012. “Inelastic buckling design of monosymmetric I-beams.” Eng. Struct. 34 (Jan): 564–571. https://doi.org/10.1016/j.engstruct.2011.10.021.
Unterwegera, H., A. Tarasb, S. Loschana, and M. Kettlera. 2017. “Influence of imperfections on the stability of beams with intermediate flexible supports.” J. Constr. Steel Res. 136 (Sep): 140–148. https://doi.org/10.1016/j.jcsr.2017.05.008.
Vlasov, V. Z. 1961. Thin-walled elastic beams. Jerusalem: Israel Program for Scientific Translations.
Zhang, W. F. 2015a. “Energy variational model and its analytical solutions for the elastic flexural-torsional buckling of I-beams with concrete-filled steel tubular flanges.” In Proc., 8th Int. Symp. on Steel Structures, 1100–1108. Seoul: Korean Society of Steel Construction.
Zhang, W. F. 2015b. “New engineering theory for mixed torsion of steel-concrete-steel composite walls.” In Vol. 12 of Proc., 11th Int. Conf. on Advances in Steel and Concrete Composite Structures, 705–712. Bradford, West Yorkshire: Association for Steel Concrete Composite Structures.
Zhang, W. F. 2015c. “New engineering theory for torsional buckling of steel-concrete composite I-columns.” In Vol. 12 of Proc., 11th Int. Conf. on Advances in Steel and Concrete Composite Structures, 225–232. Bradford, West Yorkshire: Association for Steel Concrete Composite Structures.
Zhang, W. F. 2015d. “New theory of elastic torsional buckling for axial loaded box-shaped steel columns.” In Proc. 15th National Symp. on Modern Structure Engineering, 793–804. Tianjin, China: Tianjin Univ.
Zhang, W. F. 2016. “Combined torsion theory for castellated beams with rectangular openings based on continuous model.” [In Chinese.] In Vol. 7 of Proc., 6th National Conf. on Steel Structure Engineering Technology, 359–365. Albany, CA: Seismological Society of America.
Zhang, W. F. 2018a. In-plane stability theory of steel structures. [In Chinese.] Wuhan, China: Press of Wuhan Univ. of Technology.
Zhang, W. F. 2018b. Out-plane stability theory of steel structures. [In Chinese.] Wuhan, China: Press of Wuhan Univ. of Technology.
Zhang, W. F. 2018c. “Symmetric and antisymmetric lateral-torsional buckling of prestressed steel I-beams.” Thin Walled Struct. 122 (Jun): 463–479. https://doi.org/10.1016/j.tws.2017.10.015.
Zhang, W. F., G. Leroy, W. Ahmer, and M. H. Zhang. 2018. “Analytical solution for the inelastic lateral-torsional buckling of I-beams under pure bending via plate-beam theory.” Int. J. Steel Struct. 18 (4): 1440–1463. https://doi.org/10.1007/s13296-018-0163-2.
Zhang, W. F., Y. C. Liu, K. S. Chen, and Y. Deng. 2017. “Dimensionless analytical solution and new design formula for lateral-torsional buckling of I-beams under linear distributed moment via linear stability theory.” Math. Prob. Eng. 2017: 1–23. https://doi.org/10.1155/2017/4838613.
Ziemian, R. D. 2010. Guide to stability design criteria for metal structures. 6th ed. Hoboken, NJ: Wiley.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 146 • Issue 2 • February 2020
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 5, 2018
Accepted: Feb 7, 2019
Published online: Dec 11, 2019
Published in print: Feb 1, 2020
Discussion open until: May 11, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.