Optimization of Bamboo Fiber–Reinforced Composite-Clay Bricks for Development of Low-Cost Farm Settlements toward Boosting Rural Agribusiness in Africa
Publication: Journal of Materials in Civil Engineering
Volume 34, Issue 12
Abstract
This study was conceived to develop the optimum mix for cement-stabilized bamboo fiber–reinforced clay bricks for low-cost farm settlements. The concept was concerned with the provision of houses in rural areas as incentive to encourage youth participation in farming activities and at the same time reduce rural–urban migration. The input factors for the composite development were bamboo fiber (BF), sand proportion, and cement dosage. Mixture of the input materials were carried out per experimental runs obtained by the Box-Behnken approach. Responses analyzed were apparent porosity, water absorption, and compressive and flexural strengths. The results showed that the responses were significantly affected by the experimental factors. The developed models for each response were certified statistically fit for response prediction. Also, response surface plots revealed that each response was dependent on the interactive patterns between the input factors. An optimization procedure was carried out, and the optimum mix was 0.99%–1% by weight BF, 27.24% by weight sand and 24.82% by weight cement, yielding 13.78%, 12.66%, 8.86 MPa, and 1.98 MPa for apparent porosity, water absorption, compressive strength, and flexural strength respectively. A confirmation experiment carried out yielded error < 5% for each of the parameters, validating the models. Therefore, the optimum mix can be used in the development of low-cost clay bricks with the purpose of building low-cost farm estates for improvement of agricultural activities for the purpose of engaging more youth in farming.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors appreciate the Departments of Agricultural and Resource Economics; Metallurgical and Materials Engineering and Civil Engineering, Federal University of Technology, Akure; and Center of Functional Nano-Ceramics, National University of Science and Technology, Moscow, Russia.
References
Abessolu, D., A. B. Biwole, D. Fokwa, E. Njeugna, and M. B. G. Koungang. 2020. “Modelling of the variation of physical and mechanical properties of compressed earth blocks stabilized with treated bamboo fibers.” Int. J. Eng. Sci. 9 (3): 7–12. https://doi.org/10.9790/1813-0903020712.
Adediran, A. A., A. A. Akinwande, O. A. Balogun, O. S. Adesina, and A. T. Olayanju. 2021a. “Experimental study on the mechanical behavior of fired sand-clay and glass powder-clay bricks.” Acta Metall. Slovaka 27 (1): 4–10. https://doi.org/10.36547/ams.27.1.622.
Adediran, A. A., O. A. Balogun, A. A. Akinwande, O. S. Adesina, and O. S. Bello. 2021b. “Influence of waste glass and particulate coconut shells as reinforcement materials in the production of masonry bricks.” J. Mater. Civ. Eng. 33 (10): 04021276. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003903.
Adediran, A. A., O. A. Balogun, A. A. Akinwande, O. S. Adesina, and O. S. Olasoju. 2020. “Influence of chemical treatment on the properties of cement-paper hybrid composites for ceiling board application.” Heliyon 6 (7): e04512. https://doi.org/10.1016/j.heliyon.2020.e04512.
Ademati A. O. 2021. “The effect of homestead farming on food security in peri-urban household of Ondo State, Nigeria.” M.Sc. thesis, Dept. of Agricultural and Resource Economics, Federal Univ. of Technology.
Aiyewalehinmi, E. O., and B. D. O. Ayibiowu. 2019. “Development of suitable cement stabilized clay bricks from Oke-Adu clay soil sample.” Am. J. Eng. Res. 8 (3): 204–214.
Akinwande, A. A., A. A. Adediran, O. A. Balogun, B. A. Abel, T. P. Daniel, R. A. Kazeem, and T. M. A. Olayanju. 2021a. “Study of the effect of waste glass additives on the properties and compliance level of fired ceramic masonry bricks.” IOP Conf. Ser.: Mater. Sci. Eng. 1107 (2021): 012053. https://doi.org/10.1088/1757-899X/1107/1/012053.
Akinwande, A. A., A. A. Adediran, O. A. Balogun, O. Bello, A. Barnabas, O. P. Balogun, and O. S. Adesina. 2020. “Evaluation of the influence of waste glass powder (WGP) on the thermo-mechanical performance of fired ceramics.” Acta Metall. Slovaka 26 (3): 84–94. https://doi.org/10.36547/ams.26.3.605.
Akinwande, A. A., A. A. Adediran, O. A. Balogun, O. S. Olusoju, and O. A. Adesina. 2021b. “Influence of alkaline modification on selected properties of banana fiber paperbricks.” Sci. Rep. 11 (1): 1–18. https://doi.org/10.1038/s41598-021-85106-8.
Akinwande, A. A., O. A. Balogun, V. Romanovski, H. Danso, A. O. Ademati, and Y. V. Adetula. 2022. “Recycling of synthetic waste wig fiber in the production of cement-adobe for building envelope: Physio-hydric properties.” Environ. Sci. Pollut. Res. 29 (4): 34075–34091. https://doi.org/10.1007/s11356-022-18649-6.
Akinyemi, B. A., T. E. Omoniyi, and M. O. Adeyemo. 2016. “Prospects of coir fibre as reinforcement in termite mound clay bricks.” Acta Technol. Agric. 19 (3): 57–62. https://doi.org/10.1515/ata-2016-0013.
Ali, N., N. F. M. Yusup, F. S. Khalid, S. Shahidan, and S. R. Abdullah. 2018. “The effect of water cement ratio on cement bricks containing high density polyethylene (HDPE) as sand replacement.” In Vol. 150 of Proc., MATEC Web of Conf., 03010. https://doi.org/10.1051/matecconf/201815003010.
Assiamah, S., and H. Danso. 2021. “Effects of sand on the properties of cement-laterite interlocking blocks.” In Proc., Conf. Paper at West Africa Built Environment Research (WABER). Reading, UK: West Africa Built Environment Research.
ASTM. 2016. Standard test method for flexural strength of concrete (using simple beam with center-point loading). ASTM C293/C293M-16. West Conshohocken, PA: ASTM International.
ASTM. 2021a. Standard test method for compressive strength of masonry prisms. ASTM C1314-21. West Conshohocken, PA: ASTM International.
ASTM. 2021b. Standard test methods for sampling and testing bricks and structural clay tile. ASTM C67/C67M. West Conshohocken, PA: ASTM International.
Awolusi, T. F., L. O. Oke, O. O. Akinkurolere, D. P. Uban, R. T. Bamisaye, and O. G. Aluko. 2020. “The application of response surface methodology in understanding the compressive strength and water absorption capacity of sandcrete.” Silicon 13 (11): 4123–4132. https://doi.org/10.1007/s12633-020-00701-0.
Balogun, O. A., A. A. Akinwande, A. A. Adediran, P. P. Ikubanni, S. A. Shittu, and O. S. Adesina. 2021. “Experimental study on the properties of fired sand-clay ceramic products for masonry applications.” J. Mater. Civ. Eng. 33 (2): 04020445. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003532.
Berrehail, T., N. Zemmouri, and B. Agoudjil. 2018. “Thermal conductivity OIF cement stabilized earth bricks reinforced with date palm fiber.” In AIP Conf. Proc., 1–10. College Park, MD: American Institute of Physics. https://doi.org/10.4236/ojcm.2018.84012.
Bjornlund, V., H. Bjornlund, and A. F. Van Rooyen. 2020. “Agricultural production in sub-Saharan African remains low compared with the rest of the world—A historical perspective.” Supplement, Int. J. Water Resour. Dev. 36 (S1): S20–S53. https://doi.org/10.1080/07900627.2020.1739512.
Chan, C. M. 2011. “Effect of natural fibers inclusion in clay bricks: Physio-mechanical properties.” Int. J. Civ. Environ. Eng. 5 (1): 7–13. https://doi.org/10.5281/zenodo.1331783.
Danso, H., D. B. Martinson, M. Ali, and J. B. Williams. 2017. “Mechanism by which the inclusion of natural fibers enhances the properties of soil blocks for construction.” J. Mater. Civ. Eng. 51 (27): 3835–3845. https://doi.org/10.1177/0021998317693293.
Ferreira, S. L. C., et al. 2007. “Box-Behnken design: An alternative for the optimization of analytical methods.” Anal. Chim. Acta 597 (2): 179–186. https://doi.org/10.1016/j.aca.2007.07.011.
Folorunso, D. O., and A. A. Akinwande. 2021. “Influence of wood saw dust and waste glass admixture on selected properties of fired clay bricks for masonry.” J. Eng. Eng. Technol. 1 (2021): 104–116. https://doi.org/10.51459/futajeet.2021.15.1.269.
Folorunso, D. O., A. A. Akinwande, and O. A. Baolgun. 2021. “Property evaluation and compliance level analysis of glass wastes reinforced ceramic composites for masonry applications.” Int. J. Adv. Acad. Res. 7 (5): 1–14. https://doi.org/10.46654/ij.24889849.e7305.
Hossain, M. K., M. A. Rashid, and M. R. Karim. 2015. “Effect of cement content and size of coarse aggregate on the strength of brick aggregate concrete.” DUET J. 2 (2): 20–24.
Idder, A., A. Hamouine, B. Labbaci, and R. Abdeldjebar. 2020. “The porosity of stabilized earth blocks with the addition plant fibers of the date palm.” Civ. Eng. J. 6 (3): 478–494. https://doi.org/10.28991/cej-2020-03091485.
Kolawole, F. O., O. M. Olugbemi, S. K. Kolawole, A. F. Owa, and E. S. Ajayi. 2017. “Fracture toughness and strength of bamboo-fiber reinforced laterite as building block material.” Univ. J. Mater. Sci. 5 (3): 64–72. https://doi.org/10.13189/ujms.2017.050302.
Kulkarni, I., J. W. Zang, W. M. Leandro, P. Parikh, I. Alder, W. A. D. Fonseca-Zang, and L. C. Campos. 2021. “Closed-loop biodigesters on small-scale farms in low- and middle-income countries: A review.” Water 13 (2744): 1–20. https://doi.org/10.3390/w13192744.
Limami, H., I. Manssouri, K. Cherkaoui, and A. Khaldoun. 2021. “Physicochemical, mechanical and thermal performance of lightweight bricks with recycled date pits waste additives.” J. Build. Eng. 34 (Feb): 101867. https://doi.org/10.1016/j.jobe.2020.101867.
Mechiche-Alami, A., and A. M. Abdi. 2020. “Agricultural productivity in relation to climate and cropland management in West Africa.” Sci. Rep. 10 (1): 3393. https://doi.org/10.1038/s41598-020-59943-y.
NIS (Standard Organization of Nigeria). 2000. Nigerian industrial standards. Standard for sandcrete blocks. Lagos, Nigeria: NIS.
Ogunbiyi, M. A., S. R. Akinola, A. F. Oginni, and E. Akerele. 2014. “Comparable study of cement stabilized clay bricks and sandcrete blocks as a building component.” Int. J. Appl. Sci. Technol. 4 (6): 51–61.
Praveenkumara, J., P. Madhu, T. G. Yashas Gowda, and S. Pradeep. 2018. “Studies on mechanical properties of bamboo/carbon fiber reinforced epoxy hybrid composites filled with SiC particulates.” Int. J. Eng. Res. Gen. Sci. 6 (5): 1–9.
Raheem, A. A., O. A. Bello, and B. Makinde. 2012. “A comparative study of cement and lime stabilized lateritic interlocking blocks.” Pac. J. Sci. Technol. 11 (2): 27–34.
Raj, S., S. Mohammad, R. Das, and S. Saha. 2016. “Coconut fiber-reinforced cement-stabilized rammed earth blocks.” World J. Eng. 14 (3): 208–216. https://doi.org/10.1108/WJE-10-2016-0101.
Schweig, E. O., R. T. Ferreira, G. B. Rezende, V. B. Aquino, A. L. Chrisoforo, and F. A. Lahr. 2018. “Adobe soil-cement bricks reinforced with recycled kraft fibers.” Int. J. Mater. Eng. 8 (5): 101–108. https://doi.org/10.5923/j.ijme.20180805.04.
Tripuna, D. D., S. Gupta, B. Debbarma, and R. S. S. Deep. 2020. “Flexural strength and failure trend of bamboo and coir reinforced cement stabilized rammed earth wallettes.” Constr. Build. Mater. 242 (2020): 117986. https://doi.org/10.1016/j.conbuildmat.2019.117986.
Vijayabanu, K., and M. Sivakurma. 2021. “Experimental study on bamboo as reinforced concrete and compare the strength, durability of conventional clay bricks with light weight interlocking bricks.” Ir. Interdiscip. J. Sci. Res. 5 (3): 33–37.
Vodounon, N. A., C. Kanali, and J. Mwero. 2018. “Compressive and flexural strengths of cement stabilized earth bricks reinforced with treated and untreated pineapple leaves fibers.” Open J. Compos. Mater. 8 (4): 145–160. https://doi.org/10.4236/ojcm.2018.84012.
Wang, C. N., N. A. T. Nguyen, and T. T. Dang. 2020. “Solving order planning problem using a heuristic approach: The case in a building material distributor.” Appl. Sci. 10 (8959): 1–21. https://doi.org/10.3390/app10248959.
Zhang, P., and X. Wei. 2011. “Study on flexural strength and flexural modulus of elasticity of cement stabilized aggregate.” Adv. Mater. Res. 287–290 (2011): 900–904. https://doi.org/10.4028/www.scientific.net/AMR.261-263.900.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 23, 2021
Accepted: Mar 22, 2022
Published online: Sep 28, 2022
Published in print: Dec 1, 2022
Discussion open until: Feb 28, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Abayomi Adewale Akinwande, Olanrewaju Seun Adesina, Adeolu Adesoji Adediran, Oluwatosin Abiodun Balogun, David Mukuro, Oluwayomi Peter Balogun, Kong Fah Tee, M. Saravana Kumar, Microstructure, Process Optimization, and Strength Response Modelling of Green-Aluminium-6061 Composite as Automobile Material, Ceramics, 10.3390/ceramics6010023, 6, 1, (386-415), (2023).
- Abayomi Adewale Akinwande, Oluwatosin Abiodun Balogun, Adeolu Adesoji Adediran, Olanrewaju Seun Adesina, Valentin Romanovski, Tien Chien Jen, Experimental analysis, statistical modeling, and parametric optimization of quinary-(CoCrFeMnNi)100 –x/TiCx high-entropy-alloy (HEA) manufactured by laser additive manufacturing, Results in Engineering, 10.1016/j.rineng.2022.100802, 17, (100802), (2023).
- Volha Zalyhina, Victoria Cheprasova, Valentin Romanovski, Paper industry slag for the production of building ceramics, Journal of Chemical Technology & Biotechnology, 10.1002/jctb.7174, 97, 11, (3091-3099), (2022).