Discussion of “Expert System for Determining Discharge Coefficients for Inclined Slide Gates Using Genetic Programming” by Farzin Salmasi and John Abraham
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Irrigation and Drainage Engineering
Volume 147, Issue 10
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Acknowledgments
We are immensely grateful to Professor Gray P. Merkley (Emeritus Professor of Irrigation Engineering in the Department of Civil and Environmental Engineering, Utah State University, Logan, UT, and Senior Supervising Engineer in the Natural Resources Consulting Engineers, Fort Collins, CO) for checking the relationships and his valuable comments on an early version of the manuscript, although any errors are ours alone.
References
Habibzadeh, A., A. R. Vatankhah, and N. Rajaratnam. 2011. “Role of energy loss on discharge characteristics of sluice gates.” J. Hydraul. Eng. 137 (9): 1079–1084. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000406.
Hager, W. H. 2010. Wastewater hydraulics: Theory and practice. New York: Springer.
Henry, H. 1950. “Discussion of ‘Diffusion of submerged jets’ by M. L. Albertson, Y. B. Dai, R. A. Jensen, and H. Rouse.” Trans. ASCE. 115 (1): 687–694. New York: ASCE.
Ilkhanipour, Z. R., J. S. H. Mousavi, D. S. M. Kashefipour, and M. M. Fathi. 2015. “Influence of gate plate slope on hydraulic characteristics of sluice gates.” [In Persian.] J. Soil Water Res. Conserv. 4 (4): 1–10.
Lin, C.-H., J.-F. Yen, and C.-T. Tsai. 2002. “Influence of sluice gate contraction coefficient on distinguishing condition.” J. Irrig. Drain. Eng. 128 (4): 249–252. https://doi.org/10.1061/(ASCE)0733-9437(2002)128:4(249).
Novak, P., V. Guinot, A. Jeffrey, and D. E. Reeve. 2018. Hydraulic modelling: An introduction: Principles, methods and applications. Boca Raton, FL: CRC Press.
Rajaratnam, N., and K. Subramanya. 1967. “Flow equation for the sluice gate.” J. Irrig. Drain. Div. 93 (3): 167–186. https://doi.org/10.1061/JRCEA4.0000503.
Roth, A., and W. Hager. 1999. “Underflow of standard sluice gate.” Exp. Fluids 27 (4): 339–350. https://doi.org/10.1007/s003480050358.
Sepúlveda Toepfer, C. 2008. “Instrumentation, model identification and control of an experimental irrigation canal.” Ph.D. thesis, Dept. of Hydraulic, Maritime, and Environmental Engineering, Technical Univ. of Catalonia.
Shivapur, A., and M. Shesha Prakash. 2005. “Inclined sluice gate for flow measurement.” ISH J. Hydraul. Eng. 11 (1): 46–56. https://doi.org/10.1080/09715010.2005.10514768.
Tel, J. 2000. “Discharge relations for radial gates.” M.Sc. thesis, Faculty of Civil Engineering and Geosciences, Delft Univ. of Technology.
Toch, A. 1953. “Discharge characteristics of Tainter gates.” Trans. Am. Soc. Civ. Eng. 120 (1): 290–300. https://doi.org/10.1061/TACEAT.0007240.
Wu, S., and N. Rajaratnam. 2015. “Solutions to rectangular sluice gate flow problems.” J. Irrig. Drain. Eng. 141 (12): 06015003. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000922.
Yalin, M. S. 1971. Theory of hydraulic models. New York: Macmillan International Higher Education.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 17, 2020
Accepted: Dec 22, 2020
Published online: Aug 9, 2021
Published in print: Oct 1, 2021
Discussion open until: Jan 9, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- S. P. Eron’ko, S. M. Gorbatyuk, O. A. Kobelev, I. S. Pogorelov, Improved Manipulator for Maintenance of the Cassette Gates of Steel-Pouring Ladles, Metallurgist, 10.1007/s11015-022-01380-5, 66, 5-6, (715-723), (2022).