Closure to “Load-Carrying Capacity and Required Reinforcement Strength of Closely Spaced Soil-Geosynthetic Composites” by Jonathan T. H. Wu and Thang Q. Pham
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 141, Issue 3
![First page of PDF](/cms/10.1061/(ASCE)GT.1943-5606.0001203/asset/45877391-4744-4aa5-849b-b9c104866333/assets/(asce)gt.1943-5606.0001203.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2012). LRFD bridge design specifications, 6th Ed., Washington, DC.
Adams, M., Nicks, J., Stabile, T., Wu, J., Schlatter, W., and Hartmann, J. (2011). “Geosynthetic reinforced soil integrated bridge system interim implementation guide.” Publication No. FHWAHRT-11-026, Federal Highway Administration, McLean, VA.
Adams, M. T., Ketchart, K., and Wu, J. T. H. (2007). “Mini pier experiments: Geosynthetic reinforcement spacing and strength as related to performance.” Proc., Geo-Denver 2007: Geosynthetics in Reinforcement and Hydraulic Applications, Geotechnical special publication 165, M. A. Gabr and J. J. Bowders, eds., ASCE, Reston, VA.
Berg, R. R. (2010). “Fill walls—Recent advances and future trends.” Proc., Earth Retention Conf. 3, Geotechnical special publication 208, R. Finno, Y. M. A. Hashash, and P. Arduino, eds., ASCE, Reston, VA, 19–36.
Berg, R. R., Christopher, B. R., and Samtani, N. C. (2009). “Design of mechanically stabilized earth walls and reinforced soil slopes, design and construction guidelines.” Rep. No. FHWA-NHI-00-043, Federal Highway Administration, Washington, DC.
Broms, B. B. (1977). “Triaxial tests with fabric-reinforced soil.” Proc., Int. Conf. on Use of Fabrics in Geotechnics, Vol. III, École Nationale des Ponts et Chaussées, Paris, 129–133.
Chandrasekaran, B., Broms, B. B., and Wong, K. S. (1989). “Strength of fabric reinforced sand under axisymmetric loading.” J. Geotextile Geomembr., 8(4), 293–310.
Gerber, T. M. (2012). “Assessing the long-term performance of mechanically stabilized earth walls.” NCHRP Synthesis 437, National Cooperative Highway Research Program (NCHRP), Transportation Research Board, Washington, DC.
Haeri, S. M., Noorzad, R., and Oskoorouchi, A. M. (2000). “Effect of geotextile reinforcement on the mechanical behavior of sand.” J. Geotextile Geomembr., 18(6), 385–402.
Hatami, K., and Bathurst, R. J. (2006). “Numerical model for reinforced soil segmental walls under surcharge loading.” J. Geotech. Geoenviron. Eng., 673–684.
Holtz, R. D. (2010). “Reinforced soil technology: From experimental to the familiar.” Proc., GeoFlorida 2010, ASCE, Reston, VA.
Koerner, R. M., and Koerner, G. R. (2012). “A data base and analysis of 141 failed geosynthetic reinforced mechanically stabilized earth (MSE) walls.” Proc., 26th Central Pennsylvania Geotechnical Conf., ASCE, Reston, VA.
Leshchinsky, D., and Vulova, C. (2001). “Numerical investigation of the effects of geosynthetic spacing on failure mechanisms in MSE block wall.” Geosynth. Int., 8(4), 343–365.
Morrison, K. F., Harrison, F. E., Collin, J. G., Dodds, A., and Arndt, B. (2006). “Shored mechanically stabilized earth (SMSE) wall systems design guidelines.” Rep. FHWA-CFL/TD-06-001, Federal Highway Administration, Washington, DC.
National Concrete Masonry Association (NCMA). (2009). Design manual for segmental retaining walls, 3rd Ed., J. Collin, ed., Herndon, VA.
Nicks, J. E., Adams, M. T., and Ooi, P. S. K. (2013). “Geosynthetic reinforced soil 1 performance testing—Axial load deformation relationships.” Rep. No. FHWA-HRT-13-066, Federal Highway Administration, Washington, DC.
Pham, T. Q. (2009). “Investigating composite behavior of geosynthetic-reinforced soil (GRS) mass.” Ph.D. dissertation, Univ. of Colorado, Denver.
Sawicki, A. (2000). Mechanics of reinforced soil, Balkema, Rotterdam, Netherlands.
Suah, P. G., and Goodings, D. J. (2001). “Failure of geotextile-reinforced vertical soil walls with marginal backfill.” Transportation Research Record 1772, Transportation Research Board, Washington, DC, 183–189.
Tatsuoka, F. (2008). “Recent practice and research of geosynthetic-reinforced earth structures in Japan.” J. Geoeng., 3(3), 77–100.
Tatsuoka, F., Murata, O., and Tateyama, M. (1992). “Permanent geosynthetic-reinforced soil retaining walls used for railway embankments in Japan.” Proc., Geosynthetic-Reinforced Soil Retaining Walls, J. T. H. Wu, ed., Balkema, Rotterdam, Netherlands, 101–130.
Tatsuoka, F., Tateyama, M., Uchimura, T., and Koseki, J. (1997). “Geosynthetic-reinforced soil retaining walls as important permanent structures.” Proc., Mechanically-Stabilized Backfill, J. T. H. Wu, ed., Balkema, Rotterdam, Netherlands, 3–24.
Valentine, R. J. (2013). “An assessment of the factors that contribute to the poor performance of geosynthetic-reinforced earth retaining walls.” Proc., Design and Practice of Geosynthetic-Reinforced Soil Structures, H. Ling, et al., eds. DEStech, Lancaster, PA, 318–327.
Wu, J. T. H., Pham, T. Q., and Adams, M. T. (2013). “Composite behavior of geosynthetic-reinforced soil (GRS) mass.” Rep. FHWA-HRT-10-077, Federal Highway Administration, Washington, DC.
Wu, J. T. H., Yang, K.-H., Mohamed, S., Pham, T., and Chen, R. H. (2014). “Suppression of soil dilation: A reinforcing mechanism of soil-geosynthetic composites.” J. Transp. Infrastruct. Geotechnol., 1(1), 68–82.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 20, 2014
Accepted: Aug 25, 2014
Published online: Sep 26, 2014
Published in print: Mar 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.