Discussion of “CPT-DMT Correlations” by P. K. Robertson
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 4
Get full access to this article
View all available purchase options and get full access to this article.
References
Bustamante, M., and Gianeselli, L. (1982). “Pile bearing capacity prediction by means of static penetrometer CPT.” Proc., 2nd European Symp. on Penetration Testing, Balkema, Amsterdam, 493–500.
Crapps, D. K. (2006). “The use of DMT data for lateral load analyses.” Proc., 2nd Int. Flat Dilatometer Conf., Washington, DC, 190–197.
Failmezger, R. A., and Bullock, P. J. (2008). “Which in-situ test should I use?—A designer’s guide.” Proc., Ohio River Valley Soils Seminar 39, ASCE, Cincinnati.
Failmezger, R. A., Bullock, P. J., and Handy, R. L. (2004). “Site variability, risk, and beta.” Proc., Geotechnical and Geophysical Site Characterization, A. Viana da Fonseca and P. Mayne, eds., Millpress, Rotterdam, The Netherlands, 913–920.
Marchetti, S. (1980). “In situ tests by flat dilatometer.” J. Geotech. Eng., 106(GT3), 299–321.
Marchetti, S., Totani, G., Calabrese, M., and Monaco, P. (1991). “P-y curves from DMT data for piles driven in clay.” Proc., 4th Int. Conf. on Piling and Deep Foundations Vol. 1, Deep Foundations Institute (DFI), Hawthorne, NJ, 263–272.
Mirza, C. (1998). “The high cost of low bid cost site characterization.” Proc., Geotechnical and Geophysical Site Characterization, P. K. Robertson and P. W. Mayne, eds., Balkema, Rotterdam, The Netherlands, 227–232.
Monaco, P., Totani, G., and Calabrese, M. (2006). “DMT-predicted vs. observed settlements: A review of available experience.” Proc., 2nd Int. Flat Dilatometer Conf., Washington, DC, 244–252.
Pennsylvania Dept. of Transportation. (1988). “Guidelines for using the CPT, CPTU and Marchetti DMT for geotechnical design Vol. 1–4.” Rep. No. FHWA-PA-87-024+84-24, Federal Highway Administration, Washington, DC.
Robertson, P. K., Davies, M. P., and Campanella, R. G. (1989). “Design of laterally loaded driven piles using the flat dilatometer.” Geotech. Test. J., 12(1), 30–38.
Schmertmann, J. H. (1986). “Dilatometer to compute foundation settlement.” Use of insitu tests in geotechnical engineering, S. P. Clemence, ed., ASCE, New York, 303–321.
Schmertmann, J., Baker, W., Gupta, R., and Kessler, K. (1986). “CPT/DMT QC of ground modification at a power plant.” Use of insitu tests in geotechnical engineering, S. P. Clemence, ed., ASCE, New York, 985–1001.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Apr 24, 2010
Accepted: Apr 26, 2010
Published online: Mar 15, 2011
Published in print: Apr 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.