Seismic Response of Multiple Span Steel Bridges in Central and Southeastern United States. I: As Built
This article has a reply.
VIEW THE REPLYPublication: Journal of Bridge Engineering
Volume 9, Issue 5
Abstract
The seismic response of typical multispan simply supported (MSSS) and multispan continuous steel girder bridges in the central and southeastern United States is evaluated. Nonlinear time history analyses are conducted using synthetic ground motion for three cities for 475 and 2,475-year return period earthquakes (10 and 2% probability of exceedance in 50 years). The results indicate that the seismic response for the 475-year return period earthquake would lead to an essentially linear response in typical bridges. However, the seismic response for a 2,475-year return period earthquake resulted in significant demands on nonductile columns, fixed and expansion bearings, and abutments. In particular, pounding between decks in the MSSS bridge would result in significant damage to steel bearings and would lead to the toppling of rocker bearings, which may result in unseating of the bridge deck.
Get full access to this article
View all available purchase options and get full access to this article.
References
Astaneh-Asl, A. (1991). “Behavior of major steel bridges during October 17, 1989 earthquake.” Proc., 1991 Structures Congress, ASCE, New York.
Astaneh-Asl, A., and Kanada, M. (1995). “Seismic behavior of steel bridges during the 1994 Northridge and 1995 Hanshin earthquakes.” Proc., Nat. Seismic Conf. on Bridges and Highways: Progress in Research and Practice.
Astaneh-Asl, A., and Kanada, M. (1996). “Kobe earthquake—Performance of steel bridges.” Proc., 4th Caltrans Seismic Research Workshop, California Dept. of Transportation, Sacramento, Calif.
Barker, M. G., and Hartnagel, B. A. (1997). “Longitudinal restraint response of existing bridge bearings.” Missouri Cooperative Highway Research Program Rep. 97-4, Missouri Dept. of Transportation, Mo.
Boore, D. M. (1996). “SMSIM-Fortran programs for simulating ground motions from earthquakes: Version 1.0.” U.S. Geological Survey Open-File Rep. 96-80-A, Menlo Park, Calif.
Bridge design specifications manual. (1990). California Dept. of Transportation, Sacramento, Calif.
Choi, E. (2002). “Seismic response modification of bridges in Mid-America.” Doctoral thesis, Georgia Institute of Technology, Atlanta.
DesRoches, R., and Fenves, G. L. (1997). “New design and analysis procedures for intermediate hinges in multiple-frames bridges.” Rep. No. UCB/EERC-97/12, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Dicleli, M., and Bruneau, M.(1995a). “Seismic performance of multispan simply supported slab-on-girder steel highway bridges.” Eng. Struct., 17(1), 4–14.
Dicleli, M., and Bruneau, M.(1995b). “Seismic performance of single-span simply supported and continuous slab-on-girder steel highway bridges.” J. Struct. Eng., 121(10), 1497–1506.
Dutta, A., and Mander, J. B. (1998). “Seismic fragility analysis of highway bridges.” INCEDE-MCEER Center-to-Center Workshop on Earthquake Engineering Frontiers in Transportation Systems, Tokyo.
Federal Emergency Management Agency (FEMA). (1998). “NEHRP recommended provisions for seismic regulations for new buildings and other structures. Part 1—Provisions.” Rep. No. FEMA-302, Washington, D.C.
Geol, R. K., and Chopra, A. K.(1997). “Evaluation of bridge abutment capacity and stiffness during earthquake.” Earthquake Spectra, 13(1), 1–21.
Herrmann, R. B., and Akinci, A. (1999). “Mid-America ground motion models.” 〈http://www.eas.slu.edu/People/RBHerrmann/MAEC/maecgnd.html〉.
Imbsen, R. A., and Penzien, J. (1986). “Evaluation of energy absorbing characteristic of highway bridges under seismic conditions.” EERC Rep. No. 86/17, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Iwasaki, T., Penzien, J., and Clough, R. (1971). “Literature survey—Seismic effects on highway bridges.” EERC Rep. No. 71-02, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Lin, Y., Gamble, W. L., and Hawkins, N. M. (1998). “Seismic behavior of bridge column non-contact lap splices.” SRS No. 622, Dept. of Civil and Environmental Engineering, Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
Mander, J. B., Kim, D. K., Chen, S. S., and Premus, G. J. (1996). “Response of steel bridge bearings to the reversed cyclic loading.” Technical Rep. NCEER 96-0014, National Center for Earthquake Engineering Research, State Univ. of New York, Buffalo, N.Y.
Maroney, B., Kutter, B., Romstad, K., Cahi, Y. H., and Vanderbilt, E. (1994). “Interpretation of large scale bridge abutment test results.” Proc., 3rd Annual Seismic Research Workshop, California Dept. of Transportation, Sacramento, Calif.
Myron, L. F. (1912). “The New Madrid earthquake.” U.S. Geological Survey Bulletin No. 494, Menlo Park, Calif.
Prakash, V., Powell, G. H., Campbell, S. D., and Filippou, F. C. (1992). DRAIN-2DX user guide, Department of Civil Engineering, Univ. of California at Berkeley, Berkeley, Calif.
Saadeghvaziri, M., and Rashidi, S. (1998). “Effect of steel bearings on seismic reponse of bridges in eastern United States.” Proc., 6th U.S. National Conf. on Earthquake Engineering, Earthquake Engineering Research Institute, Oakland, Calif.
Tseng, W. S., and Penzien, J. (1973). “Analytical investigations of the seismic response of long multiple span highway bridges.” EERC Rep. No. 73-12, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Wen, Y. K., and Wu, C. L.(2001). “Uniform hazard ground motions for Mid-America cities.” Earthquake Spectra, 17(2), 359–384.
Wiegel, R. L. (1970). Earthquake engineering, Prentice-Hall, Englewood Cliffs, N.J.
Zimmerman, R. M., and Brittain, R. D. (1979). “Seismic response of multi-span highway bridges.” Proc., 3rd Canadian Conf. on Earthquake Engineering, 1091–1120.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jun 17, 2002
Accepted: Dec 17, 2002
Published online: Aug 16, 2004
Published in print: Sep 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.