Improved Advancing Front Mesh Algorithm with Pseudoislands as Internal Fronts
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 140, Issue 4
Abstract
This paper presents an alternative implementation of the advancing front method for generating two-dimensional triangular unstructured meshes for finite-element applications. After initializing the front along the boundaries, internal fronts, called pseudoislands, are created inside the domain where a node-spacing function condition is met. When the element creation starts, several disjoint fronts are made active, one for each pseudoisland, and the temporal order of creation of the elements follows a smaller to bigger size sequence in an inside-to-outside propagation of the front. Postprocessing routines are available for enhancing the mesh quality. A test case for an idealized geometry shows the effectiveness of the method with high node-spacing function gradients. Several discretizations of a light detection and ranging (LIDAR) derived digital elevation model are compared for demonstrating the improvement of the new advancing front version with respect to the standard version in real applications. Finally, one of the meshes obtained with pseudoislands is used in a wet and dry tide modeling study, showing a superior resolution of the sharp bathymetric gradients and an improvement on the simulation of the wetting and drying process.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the Portuguese Foundation for Science and Technology (FCT) for providing the doctoral scholarship to the first author (SFRH/BD/61161/2009); the Portuguese Geographic Institute for making available the LIDAR data set; and Cristina Monteiro of the Portuguese Hydrographic Institute.
References
Aquaveo (2013). “Surface-water modeling system.” 〈http://xmswiki.com/xms/SMS:SMS%3c〉 (Feb. 12, 2013).
Araújo, M. A. V. C. A., Mazzolari, A., and Trigo-Teixeira, A. (2013). “An object oriented mesh generator: Application to flooding in the Douro estuary.” J. Coastal Res., 65(1), 642–647.
Bargagli, A., Carillo, A., Pisacane, G., Ruti, P. M., Struglia, M. V., and Tartaglione, N. (2002). “An integrated forecast system over the Mediterranean basin: Extreme surge prediction in the Northern Adriatic Sea.” Mon. Weather Rev., 130(5), 1317–1332.
Blain, C. A., and Rogers, W. E. (1998). “Coastal tide prediction using the ADCIRC-2DDI hydrodynamic finite element model: Model validation and sensitivity analyses in the Southern North Sea/English Channel.” Rep. No. NRL/FR/7322-98-9682, Naval Research Laboratory, Oceanography Division, Stennis Space Center, MS.
Chaouch, N., Temimi, M., Hagen, S. C., Weishampel, J., Medeiros, S., and Khanbilvardi, R. (2012). “A synergetic use of satellite imagery from SAR and optical sensors to improve coastal flood mapping in the Gulf of Mexico.” Hydrol. Processes, 26(11), 1617–1628.
Coggin, D. W. (2008). “LiDAR in coastal storm surge modeling: Modeling linear raised features.” M.S. thesis, Univ. of Central Florida, Orlando, FL.
Falcão, A. P., Mazzolari, A., Gonçalves, A. B., Araújo, M. A. V. C., and Trigo-Teixeira, A. (2013). “Influence of elevation modeling on hydrodynamic simulations of a tidally dominated estuary.” J. Hydrol., 497, 152–164.
Frey, W. H. (1987). “Selective refinement: A new strategy for automatic node placement in graded triangular meshes.” Int. J. Numer. Methods Eng., 24(11), 2183–2200.
Funakoshi, Y., Hagen, S. C., and Bacopoulos, P. (2008). “Coupling of hydrodynamic and wave models: Case study for Hurricane Floyd (1999) hindcast.” J. Waterway, Port, Coastal, Ocean Eng., 321–335.
Garimella, R. V., and Shephard, M. S. (2000). “Boundary layer mesh generation for viscous flow simulations.” Int. J. Numer. Methods Eng., 49(1–2), 193–218.
George, P. L., and Seveno, E. (1994). “The advancing front mesh generation method revisited.” Int. J. Numer. Methods Eng., 37(21), 3605–3619.
Gorman, G. J., Piggot, M. D., Wells, M. R., Pain, C. C., and Allison, P. A. (2008). “A systematic approach to unstructured mesh generation for ocean modelling using GMT and Terreno.” Comput. Geosci., 34(12), 1721–1731.
Hagen, S. C., Westerink, J. J., and Kolar, R. L. (2000). “One-dimensional finite element grids based on a localized truncation error analysis.” Int. J. Numer. Methods Fluids, 32(2), 241–261.
Hagen, S. C., Westerink, J. J., Kolar, R. L., and Horstmann, O. (2001). “Two-dimensional, unstructured mesh generation for tidal models.” Int. J. Numer. Methods Fluids, 35(6), 669–686.
Henry, R. F., and Walters, R. A. (1993). “Geometrically based, automatic generator for irregular triangular networks.” Commun. Numer. Methods Eng., 9(7), 555–566.
Instituto Hidrográfico. (2013). “Tabelas de mare.” 〈http://www.hidrografico.pt〉 (Apr. 21, 2013).
Kovač, N., Gotovac, S., and Poljak, D. (2002). “A new front updating solution applied to some engineering problems.” Arch. Comput. Meth. Eng., 9(1), 43–75.
Lee, C. K. (1999). “Automatic adaptive mesh generation using metric advancing front approach.” Eng. Comput., 16(2), 230–263.
Lee, C. K., and Hobbs, R. E. (1999). “Automatic adaptive finite element mesh generation over arbitrary two dimensional domain using advancing front technique.” Comput. Struct., 71(1), 9–34.
Le Provost, C., Lyard, F., Molines, J., Genco, M., and Rabilloud, F. (1998). “A hydrodynamic ocean tide model improved by assimilating a satellite altimeter derived data set.” J. Geophys. Res., 103(3), 5513–5529.
Le Provost, C., and Vincent, P. (1986). “Some tests of precision for a finite element model of ocean tides.” J. Comput. Phys., 65(2), 273–291.
Lo, S. H. (1985). “A new mesh generation scheme for arbitrary planar domains.” Int. J. Numer. Methods Eng., 21(8), 1403–1426.
Löhner, R. (1997). “Automatic unstructured grid generators.” Finite Elem. Anal. Des., 25(1–2), 111–134.
Löhner, R., and Cebral, J. (1999). “Parallel advancing front grid generation.” Proc., 8th Int. Meshing Roundtable, Sandia National Labs, Albuquerque, NM, 67–74.
Luettich, R. A., and Westerink, J. J. (1995). “Implementation and testing of elemental flooding and drying in the ADCIRC hydrodynamic model.” Final Rep. DACW39-94-M-5869, U.S. Army Corps of Engineers, Vicksburg, MS.
Luettich, R. A., and Westerink, J. J. (2004). “Formulation and numerical implementation of the 2D/3D ADCIRC finite element model version 44.XX.” 〈http://www.unc.edu/ims/adcirc/adcirc_theory_2004_12_08.pdf〉 (Jun. 30, 2011).
Luettich, R. A., Westerink, J. J., and Schefmer, N. W. (1992). “ADCIRC: An advanced three-dimensional circulation model for shelves, coasts, and estuaries. Report 1: Theory and methodology of ADCIRC-2DDI and ADCIRC-3DL.” Technical Rep. No. DRP-92-6, U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, MS.
Mazzolari, A. (2013). “Unstructured mesh generation applied to shallow water models.” Ph.D. thesis, Instituto Superior Técnico, Univ. of Lisbon, Lisbon, Portugal.
Mazzolari, A., Trigo-Teixeira, A., and Araújo, M. A. V. C. (2013). “A multi-criteria meshing method applied to a shallow water model.” J. Coastal Res., 65(2), 1170–1175.
Parrish, D. M., and Hagen, S. C. (2009). “Incorporating spatially variable bottom stress and Coriolis force into 2D, a posteriori, unstructured mesh generation for shallow water models.” Int. J. Numer. Methods Fluids, 60(3), 237–261.
Peraire, J., Peiró, J., and Morgan, K. (1999). “Advancing front grid generation.” Handbook of grid generation, J. F. Thompson, B. K. Soni, and N. P. Weatherill, eds., CRC Press, Boca Raton, FL, 17-1–17-22.
Peraire, J., Vahdati, M., Morgan, K., and Zienkiewicz, O. C. (1987). “Adaptive remeshing for compressible flow computations.” J. Comput. Phys., 72(2), 449–466.
Pirzadeh, S. (1994). “Viscous unstructured three-dimensional grids by the advancing-layers method.” Proc., 32nd Aerospace Sciences Meeting and Exhibit, American Institute of Aeronautics and Astronautics, Reston, VA.
Schöberl, J. (1997). “NETGEN. An advancing front 2D/3D-mesh generator based on abstract rules.” Comput. Visual. Sci., 1(1), 41–52.
Schubert, J. E., Sanders, B. F., Smith, M. J., and Wright, N. G. (2008). “Unstructured mesh generation and landcover-based resistance for hydrodynamic modeling of urban flooding.” Adv. Water Resour., 31(12), 1603–1621.
Shen, J., Zhang, K., Xiao, C., and Gong, W. (2006). “Improved prediction of storm surge inundation using a high-resolution unstructured grid model.” J. Coast. Res., 22(6), 1309–1319.
Soreide, N. N., Denbo, D. W., Wei, Y., Arcas, D., and Titov, V. V. (2011). “Developing tsunami flooding forecast software.” Proc., 23rd Conf. on Interactive Information Processing Systems for Meteorology, Oceanography, and Hydrology, Seattle, 23–27.
Trigo-Teixeira, A. (1994). “Finite element modeling of hydrodynamics in the coastal zones.” Ph.D. thesis, Univ. College of Swansea, Swansea, U.K.
Yamazaki, Y., Cheung, K. F., and Kowalik, Z. (2011). “Depth-integrated, non-hydrostatic model with grid nesting for tsunami generation, propagation, and run-up.” Int. J. Numer. Methods Fluids, 67(12), 2081–2107.
Yu, D., and Lane, S. N. (2006). “Urban fluvial flood modelling using a two-dimensional diffusion-wave treatment. Part 1: Mesh resolution effects.” Hydrol. Processes, 20(7), 1541–1565.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 10, 2013
Accepted: Jan 13, 2014
Published online: Jan 15, 2014
Published in print: Jul 1, 2014
Discussion open until: Jul 26, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.