Stability of Breakwater Armor Units against Tsunami Attacks
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 140, Issue 2
Abstract
The design of breakwater armor units against tsunami attacks has received little attention in the past because of the comparative low frequency of these events and the rarity of structures designed specifically to withstand them. However, field surveys of recent events, such as the 2011 Tohoku Earthquake Tsunami and the Indian Ocean tsunami in 2004, have shown flaws in the design of protection structures. During these extreme events, many breakwaters suffered partial or catastrophic damage. Although it is to be expected that most normal structures fail because of such high-order events, practicing engineers need to possess tools to design certain important breakwaters that should not fail even during Level 2 events. In the future, research into the design of critical structures that only partially fail (i.e., resilient or tenacious structures) during very extreme Level 2 tsunami events should be a priority; in this sense, the present paper proposes a formula that allows the estimation of armor unit damage depending on the tsunami wave height.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the kind financial contribution of the Institute for Research on Reconstruction from the Great East Japan Earthquake/Composed Crisis Research Institute from Waseda University Research Initiatives (Disaster Analysis and Proposal for Rehabilitation Process for the Tohoku Earthquake and Tsunami). This contribution made possible some of the field visits on which some of this work rests. The Lanka Hydraulic Institute (LHI) is also acknowledged for providing breakwater cross section survey data for three fishery ports in Sri Lanka. The structure and clarity of the paper was also improved by the helpful comments of two anonymous reviewers, whose contribution to the paper should also be mentioned.
References
Coastal Engineering Research Center (CERC). (1977). Shore protection manual, U.S. Army COE, Vicksburg, MS.
Coastal Engineering Research Center (CERC). (1984). Shore protection manual, U.S. Army COE, Vicksburg, MS.
Esteban, M., et al. (2012a). “Stability of rubble mound breakwaters against solitary waves.” Proc., 33rd Int. Conf. on Coastal Engineering, Association of Coastal Engineers, Gainesville, FL.
Esteban, M., Danh Thao, N., Takagi, H., and Shibayama, T. (2008). “Laboratory experiments on the sliding failure of a caisson breakwater subjected to solitary wave attack.” Proc., 8th ISOPE Pacific/Asia Offshore Mechanics Symp., International Society of Offshore and Polar Engineers, Cupertino, CA.
Esteban, M., Danh Thao, N., Takagi, H., and Shibayama, T. (2009). “Pressure exerted by a solitary wave on the rubble mound foundation of an armoured caisson breakwater.” Proc., 19th Int. Offshore and Polar Engineering Conf., J. S. Chung, S. Prinsenberg, S. W. Hong, and S. Nagata, eds., Vol. 1, International Society of Offshore and Polar Engineers, Cupertino, CA.
Esteban, M., Takagi, H., and Shibayama, T. (2007). “Improvement in calculation of resistance force on caisson sliding due to tilting.” Coast. Eng. J., 49(04), 417–441.
Esteban, M., Takagi, H., and Shibayama, T. (2012b). “Modified Goda formula to simulate sliding of composite caisson breakwater.” Coast. Eng. J.,.
Goda, Y. (1985). Random seas and design of maritime structures, University of Tokyo Press, Tokyo.
Hanzawa, M., Matsumoto, A., and Tanaka, H. (2012). “Stability of wave-dissipating concrete blocks of detached breakwaters against tsunami.” Proc., 33rd Int. Conf. on Coastal Engineering, Association of Coastal Engineers, Gainesville, FL.
Ikeno, M., Mori, N., and Tanaka, H. (2001). “Experimental study on tsunami force and impulsive force by a drifter under breaking bore like tsunamis.” Proc. Coast. Eng., JSCE, 48, 846–850.
Ikeno, M., and Tanaka, H. (2003). “Experimental study on impulse force of drift body and tsunami running up to land.” Proc. Coast. Eng., JSCE, 50, 721–725.
Kamphuis, J. W. (2000). Introduction to coastal engineering and management, World Scientific, Singapore.
Kato, F., Suwa, Y., Watanabe, K., and Hatogai, S. (2012). “Mechanism of coastal dike failure induced by the great east Japan earthquake tsunami.” Proc., 33rd Int. Conf. on Coastal Engineering, Association of Coastal Engineers, Gainesville, FL.
Mikami, T., Shibayama, T., Esteban, M., and Matsumaru, R. (2012). “Field survey of the 2011 Tohoku earthquake and tsunami in Miyagi and Fukushima Prefectures.” Coast. Eng. J., 54(01), 1250011.
Mizutani, S., and Imamura, F. (2002). “Design of coastal structure including the impact and overflow of tsunamis.” Proc. Coastal Eng., JSCE, 49, 731–735.
Mori, N., and Takahashi, T. (2012). “The 2011 Tohoku Earthquake Tsunami Joint Survey Group (2012) Nationwide Survey of the 2011 Tohoku earthquake tsunami.” Coast. Eng. J., 54(1), 1–27.
Okayasu, A., Shibayama, T., Wijayaratna, N., Suzuki, T., Sasaki, A., and Jayaratne, R. (2005). “2004 damage survey of southern Sri Lanka 2005 Sumatra earthquake and tsunami.” Proc. Coast. Eng., JSCE, 52, 1401–1405.
Shibayama, T., et al. (2013). “Classification of tsunami and evacuation areas.” Natural Hazards, 67(2), 365–386.
Tanimoto, K., Furakawa, K., and Nakamura, H. (1996). “Hydraulic resistant force and sliding distance model at sliding of a vertical caisson.” Proc. Coast. Eng., JSCE, 43, 846–850 (in Japanese).
Tanimoto, L., Tsuruya, K., and Nakano, S. (1984). “Tsunami force of Nihonkai-Chubu earthquake in 1983 and cause of revetment damage.” Proc., 31st Japanese Conf. on Coastal Engineering, World Scientific, Singapore, 257–261.
Van der Meer, J. W. (1987). “Stability of breakwater armour layers—Design formulae.” Coast. Eng., 11(3), 219–239.
Wijetunge, J. J. (2006). “Tsunami on December 26, 2004: Spatial distribution of tsunami height and the extent of inundation in Sri Lanka.” Sci. Tsunami Hazards, 24(3), 225–239.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 4, 2012
Accepted: Jul 16, 2013
Published online: Jul 18, 2013
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.