Hydrodynamic Performance of Single- and Double-Wave Screens
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 136, Issue 1
Abstract
A comprehensive experimental program has been carried out in order to assess the characteristics like reflection and transmission coefficients of slotted wave screens formed with a series of horizontally placed circular elements. To assess the effect of partial submergence, four different relative depths of submergence 0.25, 0.50, 0.75, and 1.0, where depth, and of submergence of the wave screen were tested. The wave screens were subjected to regular waves of normal angle of incidence. Further, the pressures exerted on the individual elements of the wave screen and the chamber oscillations in the case of double screen model are discussed in this paper. The peak pressures on the screen are found to reduce with a decrease in its relative depth of submergence. Empirical equations for the prediction of reflection and transmission coefficients as a function of wave steepness, relative water depth, and depth of submergence of the screen for single and double screens are proposed. Such equations for the pressures on the screens are also reported in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allsop, N. W. H. (1995). Vertical walls and breakwaters: Optimization to improve vessel safety and wave disturbance by reducing wave reflections, Reproduced invited chapter in book: Wave Forces on Inclined and Vertical Structures, ASCE, Reston, Va., 69–90.
Balaji, R., and Sundar, V. (2004). “Theoretical and experimental investigation on the wave transmission through slotted screens.” Oceanic Engineering Int. J., 8(2), 69–90.
Bergmann, H., and Oumeraci, H. (1998). “Wave pressure distribution on permeable vertical walls.” Coast. Eng. Japan, 98, 2042–2055.
Bergmann, H., and Oumeraci, H. (1999). “Hydraulic performance of perforated structures.” Proc., 5th Int. Conf. on Coastal and Port Engineering in Developing Countries, Cape Town, Africa, 1340–1349.
Gardner, J. D., and Townend, I. H. (1988). “Slotted vertical screen breakwaters.” Design of Breakwaters, Proc., Breakwaters ’88 Conf., Thomas Telford, Chap. 15, 283–298.
Goda, Y., (1985). Random seas and design of maritime structures, University of Tokyo Press.
Goda, Y., and Suzuki, Y. (1976). “Estimation of incident and reflected waves in random wave experiments.” Proc., 15th Int. Conf. on Coastal Engineering, ASCE, Reston, Va., 828–845.
Ijima, T., Chou, C. R., and Yoshida, A. (1976). “Method of analysis for two-dimensional water wave problems.” Proc., Coastal Engineering Conf., ASCE, Reston, Va., Vol. 156, 2717–2736.
Isaacson, M., Premasiri, S., and Yang, G. (1998). “Wave interaction with slotted barriers, J. Waterway, Port, Coastal, Ocean Eng., 124, 118–126.
Jarlan, G. E. (1961). “A perforated vertical wall breakwater.” The Dock and Harbor Authority, XII(486), 394–398.
Kriebel, D., (2004). “Design methods for timber wave screens.” Rep. Prepared for U.S. Coast Guard, U.S. Naval Academy.
Weigel, R. L. (1960). “Transmission of waves past a rigid vertical thin barrier.” J. Wtrwy. and Harb. Div., 86(1), 1–12.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: May 14, 2008
Accepted: May 13, 2009
Published online: May 15, 2009
Published in print: Jan 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.