Developing a Network-Level Structural Capacity Index for Asphalt Pavements
Publication: Journal of Transportation Engineering
Volume 139, Issue 2
Abstract
This paper presents a network-level structural capacity indicator for asphalt pavements in the state of Virginia. A literature review revealed that several network-level structural capacity indexes have been proposed, and a number of states use structural capacity measures in their network-level decision processes. Some decision methods and structural indexes are compared in this paper using network-level deflection data collected using the falling weight deflectometer and distress data from tests conducted on Virginia interstates. One index that is based on the structural number concept, the Structural Capacity Index, is found to produce network-level decisions that most closely match project-level work done by the Virginia Department of Transportation during the 2008 construction season. The index was adopted, and its sensitivity to various input parameters was determined. Furthermore, the impact of the structural capacity of the pavement on the service life of a pavement maintenance treatment was clearly established in this paper. Equations to define the service life of a corrective maintenance treatment as a function of the structural condition of the pavement are also presented in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bryce, J. (2012). “A pavement structural capacity index for use in network-level evaluation of asphalt pavements.” M.S. thesis, Virginia Tech, Blacksburg, VA.
Chowdhury, T. (2008). Supporting document for the development and enhancement of the pavement maintenance decision matrices used in the needs based analysis, Virginia Dept. of Transportation, Maintenance Division, Richmond, VA.
Chowdhury, T., Shekharan, R., and Diefenderfer, B. (2012). “Implementation of a network-level falling weight deflectometer survey.” Transportation Research Record, Transportation Research Board, Washington, DC (in press).
Diefenderfer, B. (2008). Network level pavement evaluation of Virginia’s interstate system using the falling weight deflectometer, Virginia Transportation Research Council, Charlottesville, VA.
Flintsch, G., and McGhee, K. (2009). “Managing the quality of pavement data collection.” Synthesis 401, National Cooperative Highway Research Program, Washington, DC.
Flora, W. (2009). “Development of a structural index for pavement management: An exploratory analysis.” M.S. thesis, Purdue Univ., West Lafayette, IN.
Gedafa, D., Hossain, M., Romanoschi, S., and Gisi, A. (2010a). “Field verification of superpave dynamic modulus.” J. Mater. Civ. Eng., 22(5), 485–494.
Gedafa, D., Hossain, M., Miller, R., and Van, T. (2010b). “Estimation of remaining service life of flexible pavements from surface deflections.” J. Transp. Eng., 136(4), 342–352.
Haas, R., Hudson, R., and Tighe, S. (2001). “Maximizing customer benefits as the ultimate goal of pavement management.” 5th Int. Conf. on Managing Pavements, Transportation Research Board, Washington, DC.
Haas, R., Hudson, W., and Zaniewski, J. (1994). Modern pavement management, Krieger Press, Malamar, FL.
Hadidi, R., and Gucunski, N. (2010). “Comparative study of static and dynamic falling weight deflectometer back-calculations using probabilistic approach.” J. Transp. Eng., 136(3), 196–204.
MACTEC Engineering and Consulting, Inc. (2006). LTPP manual for falling weight deflectometer measurements version 4.1, Federal Highway Administration, Washington, DC.
Nam, B. H., Murphy, M. R., Arellano, M., Zhang, Z., and Hwang, J. (2012). “Pavement structural evaluation at network level using the falling weight deflectometer for low volume roads in Texas.” Transportation Research Record, Transportation Research Board, Washington, DC.
Park, K., Thomas, N., and Lee, K. W. (2007). “Applicability of the international roughness index as a predictor of asphalt pavement condition.” J. Transp. Eng., 133(12), 706–709.
Rohde, G. (1994). “Determining pavement structural number from FWD.”, Transportation Research Board, Washington, DC, 61–68.
Scullion, T. (1988). Incorporating a structural strength index into the Texas pavement evaluation system, Texas Dept. of Transportation, Austin, TX.
Stantec Consulting Inc. and H. W. Lochner Inc. (2007). “Development of performance prediction models for Virginia Department of Transportation pavement management system.” Virginia Dept. of Transportation, Richmond, VA.
Virginia Department of Transportation (VDOT). (2003). Guidelines for the 1993 AASHTO pavement design guide, Materials Division, Richmond, VA.
Zaghloul, S., He, Z., Vitillo, N., and Kerr, B. (1998). “Project scoping using falling weight deflectometer testing: New Jersey experience.”, Transportation Research Board, Washington, DC, 34–43.
Zhang, Z. E. (2003). Development of a new methodology for characterizing pavement structural condition for network level applications, Texas Dept. of Transportation, Austin, TX.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 139 • Issue 2 • February 2013
Pages: 123 - 129
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 20, 2012
Accepted: Aug 29, 2012
Published online: Sep 1, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.