Effect of Point Configurations on Parameter Estimation Analysis of Circles
Publication: Journal of Surveying Engineering
Volume 147, Issue 3
Abstract
The Fisher Information Matrix (FIM) determinant and the precision of the circle parameters are derived for generic configurations with data points. The conditions for maximizing the FIM determinant are examined, and analysis shows that an infinite number of point configurations exist to maximize the FIM determinant. A collinear point configuration is proposed to obtain the highest precision of the radius, as do the configurations with the maximum FIM determinant. Moreover, theoretical analysis and the Monte Carlo method are employed to reveal that the highest precision of the parameter estimation is achieved synchronously with the maximum FIM determinant. When points are limited along an arc, the distribution ratio sequence (DRS) is designed to describe point configurations. Experiments show that the DRS of the maximum FIM determinant generally outperforms other arbitrary ones when points are limited along a certain arc.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This research is supported by the National Natural Science Foundation of China (Grant No. 51678574). The first author thanks the China Scholarship Council (Grant No. 201706375006) for financially supporting his studies at the University of Maryland.
References
Ahn, S. J., W. Rauh, and H. J. Warnecke. 2001. “Least-squares orthogonal distances fitting of circle, sphere, ellipse, hyperbola, and parabola.” Pattern Recognit. 34 (12): 2283–2303. https://doi.org/10.1016/S0031-3203(00)00152-7.
Al-Sharadqah, A., and N. Chernov. 2009. “Error analysis for circle fitting algorithms.” Electron. J. Stat. 3: 886–911. https://doi.org/10.1214/09-EJS419.
Amiri-Simkooei, A. R., J. Asgari, F. Zangeneh-Nejad, and S. Zaminpardaz. 2012. “Basic concepts of optimization and design of geodetic networks.” J. Surv. Eng. 138 (4): 172–183. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000081.
Atieg, A., and G. A. Watson. 2004. “Fitting circular arcs by orthogonal distance regression.” Appl. Numer. Anal. Comput. Math. 1 (1): 66–76. https://doi.org/10.1002/anac.200310006.
Bassani, M., G. Marinelli, and M. Piras. 2016. “Identification of horizontal circular arc from spatial data sources.” J. Surv. Eng. 142 (4): 04016013. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000186.
Berné, J. L., and S. Baselga. 2004. “First-order design of geodetic networks using the simulated annealing method.” J. Geod. 78 (1): 47–54. https://doi.org/10.1007/s00190-003-0365-y.
Chan, F. M. M., T. G. King, and K. J. Stout. 1996. “The influence of sampling strategy on a circular feature in coordinate measurements.” Measurement 19 (2): 73–81. https://doi.org/10.1016/S0263-2241(96)00067-X.
Coope, I. D. 1993. “Circle fitting by linear and nonlinear least squares.” J. Optim. Theory Appl. 76 (2): 381–388. https://doi.org/10.1007/BF00939613.
Dare, P., and H. Saleh. 2000. “GPS network design: Logistic solution using optimal and near-optimal methods.” J. Geod. 74 (6): 467–478. https://doi.org/10.1007/s001900000104.
Gerasimenko, M. D., N. V. Shestakov, and T. Kato. 2000. “On optimal geodetic network design for fault-mechanics studies.” Earth Planet Space 52 (11): 985–987. https://doi.org/10.1186/BF03352317.
Grafarend, E. W. 1974. “Optimization of geodetic networks.” Boll. Geod. Sci. Aff. 33 (4): 351–406.
Grafarend, E. W., and F. Sanso. 1985. Optimization and design of geodetic networks. Berlin: Springer.
Hopp, T. 1994. The sensitivity of three-point circle fitting. Gaithersburg, MD: National Institute of Standards and Technology.
Howell, K. B. 2001. Principles of Fourier analysis. Boca Raton, FL: CRC Press.
Isaacs, J. T., D. J. Klein, and J. P. Hespanha. 2009. “Optimal sensor placement for time difference of arrival localization.” In Proc., IEEE Conf. on Decision and Control, 7878–7884. New York: IEEE.
Johnson, H. O., and F. K. Wyatt. 1994. “Geodetic network design for fault-mechanics studies.” Manuscripta Geod. 19 (5): 309–323.
Karimaki, V. 1991. “Effective circle fitting for particle trajectories.” Nucl. Instrum. Methods Phys. Res. 305 (1): 187–191. https://doi.org/10.1016/0168-9002(91)90533-V.
Kåsa, I. 1976. “A circle fitting procedure and its error analysis.” IEEE Trans. Instrum. Meas. IM-25 (1): 8–14. https://doi.org/10.1109/TIM.1976.6312298.
Levanon, N. 2000. “Lowest GDOP in 2-D scenarios.” IEEE Proc. Radar Sonar Navig. 147 (3): 149–155. https://doi.org/10.1049/ip-rsn:20000322.
Massatt, P., and K. Rudnick. 1990. “Geometric formulas for dilution of precision calculations.” Navigation 37 (4): 379–391. https://doi.org/10.1002/j.2161-4296.1990.tb01563.x.
Nievergelt, Y. 2004. “Perturbation analysis for circles, spheres, and generalized hyperspheres fitted to data by geometric total least-squares.” Math. Comput. 73 (245): 169–180. https://doi.org/10.1090/S0025-5718-03-01613-2.
Odi, O. 1992. “Development of methodologies for measurement of circles on a coordinate measuring machines.” M.S. thesis, Univ. of North Carolina Charlotte.
Pei, S.-C., and J.-H. Horng. 1996. “Optimum approximation of digital planar curves using circular arcs.” Pattern Recognit. 29 (3): 383–388. https://doi.org/10.1016/0031-3203(95)00104-2.
Soler, T., J.-Y. Han, and C. J. Huang. 2020. “Estimating variance–covariance matrix of the parameters of a fitted triaxial ellipsoid.” J. Surv. Eng. 146 (2): 04020003. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000308.
Song, Z., H. Ding, J. Li, and H. Pu. 2018. “Circular curve-fitting method for field surveying data with correlated noise.” J. Surv. Eng. 144 (4): 04018010. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000262.
Song, Z., F. Yang, P. Schonfeld, H. Liu, and J. Li. 2021. “Integrating segmentation and parameter estimation for recreating vertical alignments.” Comput.-Aided Civ. Infrastruct. Eng. 36 (4): 472–488. https://doi.org/10.1111/mice.12634.
Song, Z., C. Zhao, H. Pu, and X. Li. 2016. “Configuration analysis of two-dimensional resection networks.” J. Surv. Eng. 142 (4): 04016018. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000193.
Xue, S., Y. Yang, Y. Dang, and W. Chen. 2014. “Dynamic positioning configuration and its first-order optimization.” J. Geod. 88 (2): 127–143. https://doi.org/10.1007/s00190-013-0683-7.
Yarlagadda, R., I. Ali, N. Al-Dhahir, and J. Hershey. 2000. “GPS GDOP metric.” IEEE Proc. Radar Sonar Navig. 147 (5): 259–264. https://doi.org/10.1049/ip-rsn:20000554.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 27, 2020
Accepted: Mar 30, 2021
Published online: May 19, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Zhanfeng Song, Xiaoxia Ma, Paul Schonfeld, Jun Li, Effects of Parameter Selections on Fitting Vertical Curves to Data, Journal of Surveying Engineering, 10.1061/(ASCE)SU.1943-5428.0000394, 148, 2, (2022).