Effects of Biaxial Bending and Axial Restraint on Hybrid Fiber Reinforced High-Performance Concrete Columns at Elevated Temperatures
Publication: Journal of Structural Engineering
Volume 148, Issue 11
Abstract
The presence of axial restraint and biaxial load eccentricity plays a vital role in the behavior and design of columns under fire conditions. Because there is limited research on these two parameters, an experimental study on hybrid fiber reinforced high-performance concrete (HPC) columns subject to standard fire curve is performed to explore the effect of biaxial bending and axial restraint. A total of four full-scale HPC columns are tested to explore the structural and spalling behavior at elevated temperatures. Test results including thermal and structural responses are elaborated, and temperature distribution, structural deformation, thermally induced restraint force, crack pattern, and fire endurance are analyzed and discussed. Explosive spalling does not occur in all the columns even under biaxial load eccentricity and axial restraint, which is attributed to the presence of steel and polypropylene fibers. It is shown that thermally induced restraint force accelerates the deformations of restrained columns. Consequently, the fire endurance of restrained columns is reduced compared with unrestrained columns. Besides, a numerical model to trace the development of axial deformation and restraint force is proposed. The proposed model is validated with test results with respect to temperature profiles, axial deformation, and restraint force. It shows that the proposed model has reasonable accuracy.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This material is based on research/work supported by the Singapore Ministry of National Development and National Research Foundation under L2 NIC Award No. L2NICCFP1-2013-4. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of L2 NIC.
References
Aldea, C.-M., J.-M. Franssen, and J.-C. Dotreppe. 1997. Fire test on normal and high-strength reinforced concrete columns. Gaithersburg, MD: NIST.
Ali, F., A. Nadjai, G. Silcock, and A. Abu-Tair. 2004. “Outcomes of a major research on fire resistance of concrete columns.” Fire Saf. J. 39 (6): 433–445. https://doi.org/10.1016/j.firesaf.2004.02.004.
Ali, F., D. O’Connor, and A. Abu-Tair. 2001. “Explosive spalling of high-strength concrete columns in fire.” Mag. Concr. Res. 53 (3): 197–204. https://doi.org/10.1680/macr.2001.53.3.197.
Anderberg, Y., and S. Thelandersson. 1976. Stress and deformation characteristics of concrete at high temperatures: Experimental investigation and material behaviour model. Lund, Sweden: Lund Institute of Technology.
Benmarce, A., and M. Guenfoud. 2005. “Experimental behaviour of high-strength concrete columns in fire.” Mag. Concr. Res. 57 (5): 283–287. https://doi.org/10.1680/macr.2005.57.5.283.
CEN (European Committee for Standardization). 2004a. Eurocode 2. Design of concrete structures—Part 1-1: General rules and rules for buildings. EN 1992-1-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004b. Eurocode 2: Design of concrete structures—Part 1-2: General rules—Structural fire design. EN 1992-1-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005. Test method for metallic fibre concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual). EN 14651. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2012. 2012 Fire resistance tests. Part 1: General requirements. EN 1363-1. Brussels, Belgium: CEN.
Du, P., D. Gan, Y. Yang, and K. H. Tan. 2019. “Simplified method for analysis of circular steel tubed-reinforced-concrete columns under eccentric compression.” Eng. Struct. 198 (Nov): 109524. https://doi.org/10.1016/j.engstruct.2019.109524.
Du, P., Y. Yang, and K. H. Tan. 2021. “Analytical modelling of high strength concrete columns under ambient and fire conditions.” Eng. Struct. 247 (Nov): 113216. https://doi.org/10.1016/j.engstruct.2021.113216.
Du, P., Y. Yang, and K. H. Tan. 2022. “Fire behaviour and design of hybrid fibre reinforced high-performance concrete columns subjected to uniaxial bending.” Eng. Struct. 251 (Jan): 113425. https://doi.org/10.1016/j.engstruct.2021.113425.
Harmathy, T. Z. 1967. A comprehensive creep model. Ottawa: National Research Council of Canada.
ISO. 2021. Fire-resistance tests — Elements of building construction — Part 1: General requirements. ISO 834-1. Geneva: ISO.
Khaliq, W., and V. Kodur. 2013. “Behavior of high strength fly ash concrete columns under fire conditions.” Mater. Struct. 46 (5): 857–867. https://doi.org/10.1617/s11527-012-9938-7.
Khaliq, W., and V. Kodur. 2018. “Effectiveness of polypropylene and steel fibers in enhancing fire resistance of high-strength concrete columns.” J. Struct. Eng. 144 (3): 04017224. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001981.
Kodur, V. 2014. “Properties of concrete at elevated temperatures.” Int. Scholarly Res. Not. 2014 (Mar): 468510. https://doi.org/10.1155/2014/468510.
Kodur, V., F.-P. Cheng, T.-C. Wang, and M. Sultan. 2003. “Effect of strength and fiber reinforcement on fire resistance of high-strength concrete columns.” J. Struct. Eng. 129 (2): 253–259. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(253).
Kodur, V., and R. McGrath. 2001. “Performance of high strength concrete columns under severe fire conditions.” In Proc., CONSEC’01: 3rd Int. Conf. on Concrete Under Severe Conditions, 254–268. Vancouver, BC, Canada: Univ. of British Columbia.
Kodur, V., and L. Phan. 2007. “Critical factors governing the fire performance of high strength concrete systems.” Fire Saf. J. 42 (6–7): 482–488. https://doi.org/10.1016/j.firesaf.2006.10.006.
Kodur, V., and N. Raut. 2012. “A simplified approach for predicting fire resistance of reinforced concrete columns under biaxial bending.” Eng. Struct. 41 (Aug): 428–443. https://doi.org/10.1016/j.engstruct.2012.03.054.
Kodur, V., T. Wang, and F. Cheng. 2004. “Predicting the fire resistance behaviour of high strength concrete columns.” Cem. Concr. Compos. 26 (2): 141–153. https://doi.org/10.1016/S0958-9465(03)00089-1.
Li, Y., P. Du, and K. H. Tan. 2021. “Fire resistance of ultra-high performance concrete columns subjected to axial and eccentric loading.” Eng. Struct. 248 (Dec): 113158. https://doi.org/10.1016/j.engstruct.2021.113158.
Nguyen, T. T. 2013. “Structural behaviour and fire-resistant analysis of reinforced concrete columns at elevated temperatures.” Ph.D. thesis, School of Civil and Environmental Engineering, Nanyang Technological Univ.
Purkiss, J. A., and L.-Y. Li. 2013. Fire safety engineering design of structures. Boca Raton, FL: CRC Press.
Raut, N., and V. Kodur. 2010. “Response of high-strength concrete columns under design fire exposure.” J. Struct. Eng. 137 (1): 69–79. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000265.
SIS (Swedish Institute for Standards). 2014. Fibre concrete—Design of fibre concrete structures. SS 812310. Stockholm, Sweden: SIS.
Tan, K.-H., and T.-T. Nguyen. 2013a. “Experimental behaviour of restrained reinforced concrete columns subjected to equal biaxial bending at elevated temperatures.” Eng. Struct. 56 (Nov): 823–836. https://doi.org/10.1016/j.engstruct.2013.06.013.
Tan, K.-H., and T.-T. Nguyen. 2013b. “Structural responses of reinforced concrete columns subjected to uniaxial bending and restraint at elevated temperatures.” Fire Saf. J. 60 (Aug): 1–13. https://doi.org/10.1016/j.firesaf.2013.04.005.
Thelandersson, S. 1987. “Modeling of combined thermal and mechanical action in concrete.” J. Eng. Mech. 113 (6): 893–906. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:6(893).
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 10, 2022
Accepted: Jun 14, 2022
Published online: Sep 9, 2022
Published in print: Nov 1, 2022
Discussion open until: Feb 9, 2023
ASCE Technical Topics:
- Axial loads
- Bending (structural)
- Biaxial loads
- Concrete
- Continuum mechanics
- Deformation (mechanics)
- Disaster risk management
- Disasters and hazards
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Fiber reinforced concrete
- Fires
- High-performance concrete
- Man-made disasters
- Materials engineering
- Measurement (by type)
- Solid mechanics
- Static loads
- Statics (mechanics)
- Structural dynamics
- Structural mechanics
- Temperature effects
- Temperature measurement
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.