Fire-Resistance Design Method for Stainless Steel Tubular X-Joints
Publication: Journal of Structural Engineering
Volume 148, Issue 1
Abstract
An experimental study was carried out on the fire-resistant performance of six stainless steel tubular X-joints. The failure process and behavioral responses of all specimens were determined, and the failure criteria of stainless steel tubular X-joints at elevated temperatures was developed. Numerical simulation was performed of the stainless steel tubular X-joints subjected to fire, and the accuracy of the model was verified by comparison with the experimental results. By referring to the yield line model in the existing specifications, a yield line model that simultaneously considers the deformation of the chord flange and web was established for stainless steel tubular X-joints. Through theoretical derivation and fitting, the prediction formula of failure temperature for stainless steel tubular X-joints without considering the effect of chord preload was obtained and then modified with the finite-element results. The adverse effect of chord preload on the failure temperature of tubular X-joint was explored using parametric analysis, and the expression of the reduction factor of failure temperature for stainless steel tubular X-joints under chord preload was obtained. A fire-resistance design method for stainless steel tubular X-joints under chord preload is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China (Nos. 51378105 and 51878146) and the National Key Research and Development Program of China (No. 2017YFC0703802). The research also was sponsored by the Qing Lan Project in Jiangsu Province and the Scientific Research Foundation of the Graduate School of Southeast University.
References
CEN (European Committee for Standardization). 2005a. Design of steel structures—Part 1-2: General rules—Structural fire design. EN 1993-1-2. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Design of steel structures—Part 1-8: Design of joints. EN 1993-1-8. Brussels, Belgium: CEN.
Chen, C., Y. Shao, and J. Yang. 2013. “Experimental and numerical study on fire resistance of circular tubular T-joints.” J. Constr. Steel Res. 85 (Jun): 24–39. https://doi.org/10.1016/j.jcsr.2013.02.013.
Chen, J., and B. Young. 2006. “Stress–strain curves for stainless steel at elevated temperatures.” Eng. Struct. 28 (2): 229–239. https://doi.org/10.1016/j.engstruct.2005.07.005.
Chen, Y., X. Zhao, and Y. Chen. 2006. “Parametric analysis and design equation of ultimate capacity for unstiffened overlapped CHS K-joints.” [In Chinese.] J. Build. Struct. 27 (4): 30–36. https://doi.org/10.14006/j.jzjgxb.2006.04.005.
Ding, R., S. Fan, G. Chen, C. Li, E. Du, and C. Liu. 2019. “Fire resistance design method for restrained stainless steel H-section columns under axial compression.” Fire Saf. J. 108 (Sep): 102837. https://doi.org/10.1016/j.firesaf.2019.102837.
Fan, S., L. Du, S. Li, L. Zhang, and K. Shi. 2019. “Fire-resistance of RHS stainless steel beams with three faces exposed to fire.” J. Constr. Steel Res. 152 (Jan): 284–295. https://doi.org/10.1016/j.jcsr.2018.04.022.
Feng, R., and B. Young. 2008. “Experimental investigation of cold-formed stainless steel tubular T-joints.” Thin Walled Struct. 46 (10): 1129–1142. https://doi.org/10.1016/j.tws.2008.01.008.
Feng, R., and B. Young. 2010. “Tests and behaviour of cold-formed stainless steel tubular X-joints.” Thin Walled Struct. 48 (12): 921–934. https://doi.org/10.1016/j.tws.2010.06.003.
Feng, R., and B. Young. 2011. “Design of cold-formed stainless steel tubular T- and X-joints.” J. Constr. Steel Res. 67 (3): 421–436. https://doi.org/10.1016/j.jcsr.2010.09.011.
Feng, R., and B. Young. 2012. “Design of cold-formed stainless steel tubular joints at elevated temperatures.” Eng. Struct. 35 (1): 188–202. https://doi.org/10.1016/j.engstruct.2011.10.029.
Feng, R., and B. Young. 2015. “Theoretical analysis of cold-formed stainless steel tubular joints.” Eng. Struct. 83 (Jan): 99–115. https://doi.org/10.1016/j.engstruct.2014.10.030.
He, A., Y. Liang, and O. Zhao. 2019. “Experimental and numerical studies of austenitic stainless steel CHS stub columns after exposed to elevated temperatures.” J. Constr. Steel Res. 154 (Mar): 293–305. https://doi.org/10.1016/j.jcsr.2018.12.005.
He, S., Y. Shao, H. Zhang, and Q. Wang. 2015. “Parametric study on performance of circular tubular K-joints at elevated temperature.” Fire Saf. J. 71 (Jan): 174–186. https://doi.org/10.1016/j.firesaf.2014.11.001.
ISO. 1999. Fire-resistance tests—Elements of building construction—Part 1: General requirements. ISO-834: 1999. Geneva: ISO.
Lan, X., and Y. Huang. 2016. “Structural design of cold-formed stainless steel tubular X- and T-joints at elevated temperatures.” Thin Walled Struct. 108 (Nov): 270–279. https://doi.org/10.1016/j.tws.2016.08.014.
Lu, L. H., G. D. de Winkel, Y. Yu, and J. Wardenier. 1994. “Deformation limit for the ultimate strength of hollow section joints.” In Proc., 6th Int. Symp. on Tubular Structures, Tubular Structures VI, edited by P. Grundy, 341–347. Rotterdam, Netherlands: A.A. Balkema.
Ministry of Housing and Urban-Rural Development. 2017. Standard for design of steel structures. GB 50017. Beijing: Ministry of Construction of China.
Mohammed, A., and S. Afshan. 2019. “Numerical modelling and fire design of stainless steel hollow section columns.” Thin Walled Struct. 144 (Nov): 106243. https://doi.org/10.1016/j.tws.2019.106243.
Ng, K. T., and L. Gardner. 2007. “Buckling of stainless steel columns and beams in fire.” Eng. Struct. 29 (5): 717–730. https://doi.org/10.1016/j.engstruct.2006.06.014.
Ozyurt, E., Y. C. Wang, and K. H. Tan. 2014. “Elevated temperature resistance of welded tubular joints under axial load in the brace member.” Eng. Struct. 59 (59): 574–586. https://doi.org/10.1016/j.engstruct.2013.11.014.
Packer, J. A. 1978. A theoretical analysis of welded steel joints in rectangular hollow sections. Ph.D. thesis, Dept. of Civil Engineering, Univ. of Nottingham.
Packer, J. A., J. Wardenier, X. Zhao, G. van der Vegte, and Y. Kurobane. 2009. Design guide for rectangular hollow section (RHS) joints under predominantly static loading. Munich, Germany: Comité International pour le Dé-veloppement et l’Etude de la Construction Tubulaire.
Rasmussen, K. J. R. 2003. “Full-range stress–strain curves for stainless steel alloys.” J. Constr. Steel Res. 59 (1): 47–61. https://doi.org/10.1016/S0143-974X(02)00018-4.
Rasmussen, K. J. R., and B. Young. 2001. “Tests of X- and K-joints in SHS stainless steel tubes.” J. Struct. Eng. 127 (10): 1173–1182. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:10(1173).
Shao, Y., Y. Zheng, H. Zhao, and D. Yang. 2016. “Performance of tubular T-joints at elevated temperature by considering effect of chord compressive stress.” Thin Walled Struct. 98 (Jan): 533–546. https://doi.org/10.1016/j.tws.2015.10.022.
Standards Australia. 2001. Cold-formed stainless steel structures. AS/NZS 4673. Sydney, Australia: AS/NZS.
Tan, K. H., T. C. Fung, and M. P. Nguyen. 2013. “Structural behavior of CHS T-joints subjected to brace axial compression in fire conditions.” J. Struct. Eng. 139 (1): 73–84. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000604.
Young, B. 2008. “Experimental and numerical investigation of high strength stainless steel structures.” J. Constr. Steel Res. 64 (11): 1225–1230. https://doi.org/10.1016/j.jcsr.2008.05.004.
Zhao, X. L., and G. J. Hancock. 1991. “T-joints in rectangular hollow sections subject to combined actions.” J. Struct. Eng. 117 (8): 2258–2277. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:8(2258).
Zheng, B. 2017. “Investigations on the key problems in the mechanical properties of cold formed stainless steel structures.” [In Chinese.] Ph.D. thesis, School of Civil Engineering, Southeast Univ.
Zhu, W. 2017. “Static performance of stainless steel uniplanar welded mixed tubular joints.” [In Chinese.] Ph.D. thesis, College of Civil Engineering, Hefei Univ. of Technology.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 15, 2021
Accepted: Aug 10, 2021
Published online: Oct 22, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Cheng Chen, Yifan Chen, Yongbo Shao, Kwok Fai Chung, Yifei Hu, Fire resistance and design assessment of Q355 circular hollow section joints, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107702, 201, (107702), (2023).
- Y. Zhang, M.P. Nguyen, T.C. Fung, K.H. Tan, Numerical and experimental study on structural behavior of restrained CHS T-joints in transient fire tests, Structures, 10.1016/j.istruc.2022.12.075, 48, (511-522), (2023).
- Meijing Liu, Shengjie Duan, Yiwen Wu, Shenggang Fan, Qingfeng Xu, Fire resistance design of austenitic SUS316 stainless columns subjected to axial compression, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107540, 198, (107540), (2022).