Bending Stiffness of Parallel Wire Cables Including Interfacial Slips among Wires
Publication: Journal of Structural Engineering
Volume 144, Issue 10
Abstract
Cables of parallel wires are idealized as laminated beams including interlayer slips to consider the effect of interfacial slips among wires on their bending stiffness. The governing differential equations for the bending of laminated beams are then derived and solved analytically under either uniformly distributed load or midspan concentrated force. Consequently, the equivalent bending stiffness (EBS) of the cable is obtained analytically, which is significantly dependent on the slip rigidity between the layers. Using the experimental results of bending tests of cables of parallel wires in the literature, the relationship between the slip rigidity and the average tensile stress of cable is established. The factors influencing the EBS of cables are studied and the EBS of cables with common cross sections is provided to demonstrate the presented method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (No. 51478422).
References
Arena, A., A. Pacitti, and W. Lacarbonara. 2016. “Nonlinear response of elastic cables with flexural-torsional stiffness.” Int. J. Solids Struct. 87: 267–277. https://doi.org/10.1016/j.ijsolstr.2015.09.019.
Ceballos, M. A., and C. A. Prato. 2008. “Determination of the axial force on stay cables accounting for their bending stiffness and rotational end restraints by free vibration tests.” J. Sound Vibr. 317 (1–2): 127–141. https://doi.org/10.1016/j.jsv.2008.02.048.
Chen, Z. H., Y. J. Yu, X. D. Wang, X. F. Wu, and H. B. Liu. 2015. “Experimental research on bending performance of structural cable.” Constr. Build. Mater. 96: 279–288. https://doi.org/10.1016/j.conbuildmat.2015.08.026.
Faella, C., E. Martinelli, and E. Nigro. 2010. “Steel-concrete composite beams in partial interaction: Closed-form ‘exact’ expression of the stiffness matrix and the vector of equivalent nodal forces.” Eng. Struct. 32 (9): 2744–2754. https://doi.org/10.1016/j.engstruct.2010.04.044.
Foti, F., and L. Martinelli. 2016a. “An analytical approach to model the hysteretic bending behavior of spiral strands.” Appl. Math. Model. 40 (13–14): 6451–6467. https://doi.org/10.1016/j.apm.2016.01.063.
Foti, F., and L. Martinelli. 2016b. “Mechanical modeling of metallic strands subjected to tension, torsion and bending.” Int. J. Solids Struct. 91: 1–17. https://doi.org/10.1016/j.ijsolstr.2016.04.034.
Girhammar, U. A., and V. K. A. Gopu. 1993. “Composite beam-columns with interlayer slip-exact analysis.” J. Struct. Eng. 119 (4): 1265–1282. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:4(1265).
Meng, F. M., Y. P. Chen, M. G. Du, and X. S. Gong. 2016. “Study on effect of inter-wire contact on mechanical performance of wire rope strand based on semi-analytical method.” Int. J. Mech. Sci. 115: 416–427. https://doi.org/10.1016/j.ijmecsci.2016.07.012.
Newmark, N. M., C. P. Siess, and I. M. Viest. 1951. “Test and analysis of composite beams with incomplete interaction.” Proc. Soc. Exp. Stress Anal. 9 (1): 75–92.
Ni, Y. Q., J. M. Ko, and G. Zheng. 2002. “Dynamic analysis of large-diameter sagged cables taking into account flexural rigidity.” J. Sound Vibr. 257 (2): 301–319. https://doi.org/10.1006/jsvi.2002.5060.
Paczelt, I., and R. Beleznai. 2011. “Nonlinear contact-theory for analysis of wire rope strand using high-order approximation in the FEM.” Comput. Struct. 89 (11–12): 1004–1025. https://doi.org/10.1016/j.compstruc.2011.01.011.
Raoof, M. 1989. “Free bending tests on large spiral strands.” Proc. Inst. Civ. Eng. 87 (4): 605–626. https://doi.org/10.1680/iicep.1989.3781.
Raoof, M., and T. J. Davies. 2004. “Determination of the bending stiffness for a spiral strand.” J. Strain Anal. 39 (1): 1–13. https://doi.org/10.1177/030932470403900101.
Raoof, M., and R. E. Hobbs. 1984. “The bending of spiral strand and armored cables close to terminations.” J. Energy Resour. Technol. 106 (3): 349–355. https://doi.org/10.1115/1.3231064.
Raoof, M., and R. E. Hobbs. 1988. “Analysis of multilayered structural strands.” J. Eng. Mech. 114 (7): 1166–1182. https://doi.org/10.1061/(ASCE)0733-9399(1988)114:7(1166).
Raoof, M., and Y. P. Huang. 1992. “Axial and free-bending analysis of spiral strands made simple.” J. Eng. Mech. 118 (12): 2335–2351. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:12(2335).
Ricciardi, G., and F. Saitta. 2008. “A continuous vibration analysis model for cables with sag and bending stiffness.” Eng. Struct. 30 (5): 1459–1472. https://doi.org/10.1016/j.engstruct.2007.08.008.
Sousa, J. B. M., Jr., and A. R. Silva. 2010. “Analytical and numerical analysis of multilayered beams with interlayer slip.” Eng. Struct. 32 (6): 1671–1680. https://doi.org/10.1016/j.engstruct.2010.02.015.
Sousa, R. A., R. M. Souza, F. P. Figueiredo, and I. F. M. Menezes. 2011. “The influence of bending and shear stiffness and rotational inertia in vibrations of cables: An analytical approach.” Eng. Struct. 33 (3): 689–695. https://doi.org/10.1016/j.engstruct.2010.11.026.
Xu, R. Q., and Y. F. Wu. 2007a. “Static, dynamic, and buckling analysis of partial interaction composite members using Timoshenko’s beam theory.” Int. J. Mech. Sci. 49 (10): 1139–1155. https://doi.org/10.1016/j.ijmecsci.2007.02.006.
Xu, R. Q., and Y. F. Wu. 2007b. “Two-dimensional analytical solutions of simply supported composite beams with interlayer slips.” Int. J. Solids Struct. 44 (1): 165–175. https://doi.org/10.1016/j.ijsolstr.2006.04.027.
Xu, R. Q., and Y. F. Wu. 2008. “Free vibration and buckling of composite beams with interlayer slip by two-dimensional theory.” J. Sound Vibr. 313 (3–5): 875–890. https://doi.org/10.1016/j.jsv.2007.12.029.
Yu, Y. J., X. X. Wang, and Z. H. Chen. 2016. “A simplified finite element model for structural cable bending mechanism.” Int. J. Mech. Sci. 113: 196–210. https://doi.org/10.1016/j.ijmecsci.2016.05.004.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 9, 2017
Accepted: Apr 11, 2018
Published online: Jul 9, 2018
Published in print: Oct 1, 2018
Discussion open until: Dec 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.