Lateral-Torsional Buckling of Circular Steel Arches under Arbitrary Radial Concentrated Load
Publication: Journal of Structural Engineering
Volume 143, Issue 9
Abstract
Steel arches are applied in many engineering structures because of their excellent capacity to resist various transverse loadings. Modified (or normalized) slenderness plays an important role in the strength design of steel arches. The elastic lateral-torsional buckling load of steel arches is essential in calculating the modified slenderness for the out-of-plane strength design. This paper is concerned with analytical investigations of the elastic lateral-torsional buckling of steel pin-ended arches having in-plane rotationally restrained ends under an arbitrary radial concentrated load, which has not been reported in the literature. Nonuniform unsymmetrical distributed internal actions are produced by the arbitrary load and are significantly influenced by the load position. The arch suddenly reaches its ultimate resistance in a lateral-torsional buckling mode when the internal actions reach certain values. This paper conducts a theoretical investigation into the elastic lateral-torsional buckling of steel arches and derives the analytical solution for the buckling load based on accurate internal forces obtained by an exact prebuckling analysis. The fourth-order differential equations in terms of axial and radial displacements, which are successfully used for the prebuckling analysis of steel arches under symmetric loads, are found to be difficult to solve for steel arches under an arbitrary concentrated load. A proper method is explored and found useful for accurately determining the prebuckling internal forces. The analytical solutions for the elastic lateral-torsional buckling load based on the accurate prebuckling internal forces are compared with the independent finite-element results, and the comparisons show very good agreements between them. The effects of the load position on the lateral-torsional buckling loads of arches are investigated. It is found that the buckling loads are significantly influenced by changes in load position. The lateral-torsional buckling load increases as the load position moves away from the crown of the arch. The influence of the load position on the lateral-torsional buckling load of steel arches with a rectangular section is slightly significant than that of steel arches with an I-section. The elastic lateral-torsional buckling load obtained in this paper provides a sound basis for out-of-plane strength studies of steel arches in the future.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported was financially supported by the National Natural Science Foundation of China (No. 51578166), Project of Chief Scientist of the Yangcheng Scholar (No. 1201541551), Technology Planning Project of Guangdong Province (No. 2016B050501004).
References
ANSYS 12.0 [Computer software]. ANSYS, Canonsburg, PA.
Bažant, Z. P., and Cedolin, L. (2003). Stability of structures, Dove Publications, Mineola, NY.
Bradford, M. A., and Pi, Y. L. (2006). “Flexural-torsional buckling of fixed steel arches under uniform bending.” J. Constr. Steel Res., 62(1), 20–26.
Bradford, M. A., and Pi, Y. L. (2012). “A new analytical solution for lateral-torsional buckling of arches under axial uniform compression.” Eng. Struct., 41(1), 14–23.
Kang, Y. J., and Yoo, C. H. (1994). “Thin-walled curved beams. II: Analytical solutions for buckling of arches.” J. Eng. Mech., 2102–2125.
Papangelis, J. P., and Trahair, N. S. (1987). “Flexural-torsional buckling of arches.” J. Struct. Eng., 889–906.
Papangelis, J. P., and Trahair, N. S. (1988). “Buckling of monosymmetric arches under point loads.” Eng. Struct., 10(4), 257–264.
Pi, Y. L., and Bradford, M. A. (2013a). “Lateral-torsional buckling analysis of arches having in-plane rotational end restraints under uniform radial loading.” J. Eng. Mech., 1602–1609.
Pi, Y. L., and Bradford, M. A. (2013b). “Lateral-torsional elastic buckling of rotationally restrained arches with a thin-walled section under a central concentrated load.” Thin-Walled Struct., 73(1), 18–26.
Pi, Y. L., Bradford, M. A., and Tin-Loi, F. (2007). “Flexural-torsional buckling of shallow arches with open thin-walled section under uniform radial loads.” Thin-Walled Struct., 45(3), 352–362.
Pi, Y. L., Bradford, M. A., and Tong, G. S. (2010). “Elastic lateral-torsional buckling of circular arches subjected to a central concentrated load.” Int. J. Mech. Sci., 52(6), 847–862.
Pi, Y. L., Bradford, M. A., Trahair, N. S., and Chen, Y. Y. (2005). “A further study of flexural-torsional buckling of elastic arches.” Int. J. Struct. Stab. Dyn., 5(02), 163–183.
Rajasekaran, S., and Padmanabhan, S. (1989). “Equations of curved beams.” J. Eng. Mech., 1094–1111.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York.
Trahair, N. S. (1993). Flexural-torsional buckling of structures, CRC, London.
Vlasov, V. Z. (1984). Thin-walled elastic beams, 2nd Ed., Israel Program for Scientific Translation, Jerusalem, Israel.
Yang, Y. B., and Kuo, S. R. (1986). “Static stability of curved thin-walled beams.” J. Struct. Eng., 112(8), 821–841.
Yang, Y. B., and Kuo, S. R. (1987). “Effect of curvature on stability of curved beams.” J. Struct. Eng., 1185–1202.
Yang, Y. B., Kuo, S. R., and Yau, J. D. (1991). “Use of straight-beam approach to study buckling of curved beams.” J. Struct. Eng., 1963–1978.
Yoo, C. H. (1982). “Flexural-torsional stability of curved beams.” J. Eng. Mech. Div., 108(6), 1351–1369.
Ziemian R. D. (2010). Guide to stability design criteria for metal structures, John Wiley & Sons, New York.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 143 • Issue 9 • September 2017
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 4, 2017
Accepted: Mar 23, 2017
Published online: Jul 6, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 6, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.