Design of Single-Level Guyed Towers Considering Interrelationship between Bracing Strength and Rigidity Requirements
Publication: Journal of Structural Engineering
Volume 143, Issue 9
Abstract
Elastic buckling and second-order analyses are conducted to establish a more rigorous design procedure for single-level guyed towers, in which the interrelationship between the strength and rigidity requirements of the guys are considered to provide adequate lateral bracing. First, the guyed tower is simplified to a laterally braced column using an equivalent spring model for the guy action. Then, elastic buckling analysis is conducted to investigate the buckling axial force and the bracing rigidity requirement of an ideal laterally braced column. Using the exact stability stiffness matrix, the eigenproblem is formulated and solved. The influences of base fixity factor and lateral bracing rigidity on the buckling axial force are discussed. Second-order analysis is conducted to examine the inverse relationship between the strength and rigidity requirements in the lateral bracing design of a real column with initial imperfections and lateral loads. The differential equation of equilibrium for the laterally braced column considering geometric nonlinearity is established and solved. The lateral bracing strength limit is determined for guyed towers and the bracing rigidity requirement is formulated based on this strength limit. Finally, the design procedure and a design example are presented in three parts: tower stability design, guy rigidity design, and tower detailing and strength examination. Design implications for multilevel guyed towers are further noted.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support provided by the Beijing Natural Science Foundation (Grant No. 8162023) and the National Natural Science Foundation of China (Grant No. 51378291). The writers also express their sincere appreciation to the reviewers of this paper for their constructive comments and suggestions.
References
AISC. (2010). “Code of standard practice for steel buildings and bridges.” AISC 303-10, Chicago.
Aristizabal-Ochoa, J. D. (1994). “K-factor for columns in any type of construction: Nonparadoxical approach.” J. Struct. Eng., 1272–1290.
Aristizabal-Ochoa, J. D. (1997). “Elastic stability of beam-columns with flexural connections under various conservative end axial forces.” J. Struct. Eng., 1194–1200.
CEN (European Committee for Standardization). (2006). “Design of steel structures. Part 3-1: Towers, masts and chimneys—Towers and masts.” Eurocode 3, EN 1993-3-1, Brussels, Belgium.
Chajes, A., and Chen, W. S. (1979). “Stability of guyed towers.” J. Struct. Div., 105(1), 163–174.
Cohen, E., and Perrin, H. (1957a). “Design of multi-level guyed towers: Structural analysis.” J. Struct. Div., 83(5), 1–29.
Cohen, E., and Perrin, H. (1957b). “Design of multi-level guyed towers: Wind loading.” J. Struct. Div., 83(5), 1–29.
Costello, G. A., and Phillips, J. W. (1983). “Post-buckling behavior of guyed towers.” J. Struct. Eng., 1450–1459.
Der Kiureghian, A., and Sackman, J. L. (2005). “Tangent geometric stiffness of inclined cables under self-weight.” J. Struct. Eng., 941–945.
Ekhande, S. G., Selvappalam, M., and Madugula, M. K. S. (1989). “Stability functions for three-dimensional beam-columns.” J. Struct. Eng., 467–479.
El-Ghazaly, H. A., and Al-Khaiat, H. A. (1995). “Analysis and design of guyed transmission towers—Case study in Kuwait.” Comput. Struct., 55(3), 413–431.
Gantes, C., Khoury, R., Connor, J. J., and Pouangare, C. (1993). “Modeling, loading, and preliminary design considerations for tall guyed towers.” Comput. Struct., 49(5), 797–805.
Ghafari Oskoei, S. A., and McClure, G. (2012). “New robust linearized seismic analysis method for tall guyed telecommunication masts.” J. Struct. Eng., 502–513.
Goldberg, J. E., and Gaunt, J. T. (1973). “Stability of guyed towers.” J. Struct. Div., 99(4), 741–756.
Goldberg, J. E., and Meyers, V. J. (1965). “A study of guyed towers.” J. Struct. Div., 91(4), 57–76.
Irvine, H. M., and O’Sullivan, M. J. (1979). “Elastic stability of simple guyed towers.” Appl. Ocean Res., 1(4), 203–207.
Issa, R. R. A., and Avent, R. R. (1991). “Microcomputer analysis of guyed towers as lattices.” J. Struct. Eng., 1238–1256.
Lenci, S., Orlando, D., Rega, G., and Gonçalves, P. (2012). “Controlling nonlinear dynamics of systems liable to unstable interactive buckling.” Procedia IUTAM, 5, 108–123.
Matuszkiewicz, M. (2011). “Calculation of guyed masts in accordance with EN 1993-3-1 standard taking into account mast shaft geometrical imperfections.” Eng. Struct., 33(6), 2044–2048.
Munoz, H. R. (1991). “Elastic second-order computer analysis of beam–columns and frames.” M.S. thesis, Univ. of Texas at Austin, Austin, TX.
Nielsen, M. G., and Støttrup-Andersen, U. (2006). “Comparison of the advantages of guyed masts to self-supporting towers.” Structures Congress 2006, ASCE, Reston, VA.
Orlando, D., Gonçalves, P. B., Rega, G., and Lenci, S. (2013). “Nonlinear dynamics and instability as important design concerns for a guyed mast.” IUTAM Symp. on Nonlinear Dynamics for Advanced Technologies and Engineering Design, Springer International Publishing AG, Cham, Switzerland.
Pan, W. H., Tao, M. X., and Nie, J. G. (2017). “Fiber beam-column element model considering reinforcement anchorage slip in the footing.” Bull. Earthquake Eng., 15(3), 991–1018.
Rowe, R. S. (1958). “Amplification of stress and displacement in guyed towers.” J. Struct. Div., 84(6), 1–20.
Thompson, J. M. T., and Gaspar, Z. (1977). “A buckling model for the set of umbilic catastrophes.” Math. Proc. Cambridge. Philos. Soc., 82(3), 497–507.
Wang, L., and Helwig, T. A. (2005). “Critical imperfections for beam bracing systems.” J. Struct. Eng., 933–940.
Winter, G. (1958). “Lateral bracing of columns and beams.” J. Struct. Div., 84(2), 1–22.
Yuan, S. (2008). Programming structural mechanics, 2nd Ed., Higher Education Press, Beijing (in Chinese).
Ziemian, R. D., ed. (2010). Guide to stability design criteria for metal structures, 6th Ed., Wiley, Hoboken, NJ.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 5, 2016
Accepted: Mar 23, 2017
Published online: Jul 6, 2017
Published in print: Sep 1, 2017
Discussion open until: Dec 6, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.