Redundancy Optimization of Finite-Dimensional Structures: Concept and Derivative-Free Algorithm
Publication: Journal of Structural Engineering
Volume 143, Issue 1
Abstract
Redundancy is related to the amount of functionality that the structure can sustain in the worst-case scenario of structural degradation. This paper proposes a widely-applicable concept of redundancy optimization of finite-dimensional structures. The concept is consistent with the robust structural optimization and with the quantitative measure of structural redundancy on the basis of the information-gap theory. A derivative-free algorithm is proposed on the basis of the sequential quadratic programming (SQP) method, in which the finite-difference method that adaptively varies the difference increment is used. Preliminary numerical experiments show that an optimal solution of the redundancy optimization problem possibly has multiple worst-case scenarios.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is partially supported by the Support Program for Urban Studies from the Obayashi Foundation.
References
MATLAB [Computer software]. MathWorks, Natick, MA.
Ben-Haim, Y. (2006). Information-gap decision theory: Decisions under severe uncertainty, 2nd Ed., Academic Press, London.
Ben-Tal, A., El Ghaoui, L., and Nemirovski, A. (2009). Robust optimization, Princeton University Press, Princeton, NJ.
Ben-Tal, A., and Nemirovski, A. (1997). “Robust truss topology design via semidefinite programming.” SIAM J. Optim., 7(4), 991–1016.
Bertero, R. D., and Bertero, V. V. (1999). “Redundancy in earthquake-resistant design.” J. Struct. Eng, 81–88.
Brett, C., and Lu, Y. (2013). “Assessment of robustness of structures: current state of research.” Front. Struct. Civ. Eng., 7(4), 356–368.
Cherkaev, E., and Cherkaev, A. (2003). “Principal compliance and robust optimal design.” J. Elast., 72(1–3), 71–98.
Conn, A. R., Scheinberg, K., and Vincente, L. N. (2009). Introduction to derivative-free optimization, SIAM, Philadelphia.
CPLEX [Computer software]. IBM ILOG, Armonk, NY.
Frangopol, D. M., and Curley, J. P. (1987). “Effects of damage and redundancy on structural reliability.” J. Struct. Eng., 1533–1549.
Guo, X., Zhang, W., and Zhang, L. (2013). “Robust structural topology optimization considering boundary uncertainties.” Comput. Methods Appl. Mech. Eng., 253, 356–368.
Hashimoto, D., and Kanno, Y. (2015). “A semidefinite programming approach to robust truss topology optimization under uncertainty in locations of nodes.” Struct. Multidiscipl. Optim., 51(2), 439–461.
Jang, G.-W., van Dijk, N. P., and van Keulen, F. (2012). “Topology optimization of MEMS considering etching uncertainties using the level-set method.” Int. J. Numer. Methods Eng., 92(6), 571–588.
Jansen, M., Lombaert, G., Schevenels, M., and Sigmund, O. (2014). “Topology optimization of fail-safe structures using a simplified local damage model.” Struct. Multidiscipl. Optim., 49(4), 657–666.
Kanno, Y. (2012). “Worst scenario detection in limit analysis of trusses against deficiency of structural components.” Eng. Struct., 42, 33–42.
Kanno, Y., and Ben-Haim, Y. (2011). “Redundancy and robustness, or, when is redundancy redundant?” J. Struct. Eng., 935–945.
Kelley, C. T. (2011). Implicit filtering, SIAM, Philadelphia.
Kobayashi, Y., Higashikawa, Y., Katoh, N., and Sljoka, A. (2016). “Characterizing redundant rigidity and redundant global rigidity of body-hinge graphs.” Inform. Process. Lett., 116(2), 175–178.
Mohr, D. P., Stein, I., Matzies, T., and Knapek, C. A. (2014). “Redundant robust topology optimization of truss.” Optim. Eng., 15(4), 945–972.
Mousavi, M. E., and Gardoni, P. (2014). “Integrity index and integrity-based optimal design of structural systems.” Eng. Struct., 60, 206–213.
Nguyen, D. T., and Arora, J. S. (1982). “Fail-safe optimal design of complex structures with substructures.” J. Mech. Des., 104(4), 861–868.
Nocedal, J., and Wright, S. J. (2006). Numerical optimization, 2nd Ed., Springer, New York.
Schafer, B. W., and Bajpai, P. (2005). “Stability degradation and redundancy in damaged structures.” Eng. Struct., 27(11), 1642–1651.
Seyranian, A. P., Lund, E., and Olhoff, N. (1994). “Multiple eigenvalues in structural optimization problem.” Struct. Optim., 8(4), 207–227.
Sigmund, O. (2009). “Manufacturing tolerant topology optimization.” Acta Mech. Sin., 25(2), 227–239.
Sun, P. F., Arora, J. S., and Haug Jr., E. J. (1976). “Fail-safe optimal design of structures.” Eng. Optim., 2(1), 43–53.
Takezawa, A., Nii, S., Kitamura, M., and Kogiso, N. (2011). “Topology optimization for worst load conditions based on the eigenvalue analysis of an aggregated linear system.” Comput. Methods Appl. Mech. Eng., 200(25–28), 2268–2281.
Tangaramvong, S., Tin-Loi, F., Wu, D., and Gao, W. (2013). “Mathematical programming approaches for obtaining sharp collapse load bounds in interval limit analysis.” Comput. Struct., 125, 114–126.
Yonekura, K., and Kanno, Y. (2010). “Global optimization of robust truss topology via mixed integer semidefinite programming.” Optim. Eng., 11(3), 355–379.
Zhu, B., and Frangopol, D. M. (2012). “Reliability, redundancy and risk as performance indicators of structural systems during their life-cycle.” Eng. Struct., 41, 34–49.
Žiha, K. (2000). “Redundancy and robustness of systems of events.” Probab. Eng. Mech., 15(4), 347–357.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 17, 2015
Accepted: Jun 21, 2016
Published online: Aug 3, 2016
Published in print: Jan 1, 2017
Discussion open until: Jan 3, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.