Nonlinear Material Loss Factors of Single-Layer Latticed Domes Subjected to Earthquake Ground Motions
Publication: Journal of Structural Engineering
Volume 141, Issue 7
Abstract
The quantification of damping in a structure is of significant interest in structural dynamics. At present, there is still no clear consensus on how damping issues are resolved. Although the Rayleigh damping model, which combines mass-proportional and stiffness-proportional parts, leads to reasonable engineering demand parameters of a structure within its elastic range, it does not include nonlinear response history analysis. On the other hand, a great deal of material tests demonstrate that most metallic materials under cyclic loading exhibit a stress-strain relationship that is not elastic even at stresses well below the yield point, however, the material damping effect is seldom taken into account in dynamic analysis. The present study proposes an approach that explicitly considers the additional material damping effect based on Goodman’s theory on energy dissipation of materials. The approach is applied to the nonlinear dynamic analyses of single-layer latticed domes subjected to earthquake ground motions. Parametric studies are carried out to evaluate the structural material loss factors under different seismic hazard levels. Finally, a comparative study of the effect of material damping on dynamic responses is discussed. The objective of this study is to quantify the structural material loss factors and to obtain reasonable dynamic seismic demands by means of the easy-to-apply numerical procedure proposed in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to gratefully acknowledge the financial support from the National Science Foundation of China (Grant Nos.: 51108301, 51278038, and 51078259) and the Program for New Century Excellent Talents in University (Grant No.: NCET10-0613)
References
ABAQUS version 6.11 [Computer software]. Providence, RI, ABAQUS.
Adhikari, S. (2002). “Dynamics of nonviscously damped linear systems.” J. Eng. Mech., 328–339.
Adhikari, S. (2006). “Damping modelling using generalized proportional damping.” J. Sound Vibr., 293(1–2), 156–170.
ASCE/SEI. (2005). “Minimum design loads for buildings and other structures.”, Reston, VA.
Bernal, D. (1994). “Viscous damping in inelastic structural response.” J. Struct. Eng., 1240–1254.
Bert, C. W. (1973). “Material damping: An introductory review of mathematic measures and experimental technique.” J. Sound Vibr., 29(2), 129–153.
Charney, F. A. (2008). “Unintended consequences of modeling damping in structures.” J. Struct. Eng., 581–592.
Chopra, A. K. (1995). Dynamics of structures: Theory and applications to earthquake engineering, Prentice-Hall, Englewood Cliffs, NJ.
Chrisp, D. J. (1980). “Damping models for inelastic structures.” M.S. thesis, Univ. of Canterbury, Christchurch, U.K.
Clarence, W. S. (2005). Vibration and shock handbook, CRC Press, Taylor & Francis Group, FL.
Clough, R. W., and Penzien, J. (1993). Dynamics of structures, 2nd Ed., McGraw-Hill, New York.
Dymiotis, C., Kappos, A. J., and Chryssanthopoulos, M. K. (1999). “Seismic reliability of RC frames with uncertain drift and member capacity.” J. Struct. Eng., 1038–1047.
Goel, R. K., and Chopra, A. K. (1997). “Vibration properties of buildings determined from recorded earthquake motions.”, Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Goodman, L. E. (2002). Material damping and slip damping (in shock and vibration handbook), 5th Ed., McGraw-Hill, New York.
Gounaris, G. D., and Anifantis, N. K. (1999). “Structural damping determination by finite element approach.” Comput. Struct., 73(1–5), 445–452.
Gounaris, G. D., Antonakakis, E., and Papadopoulos, C. A. (2007). “Hysteretic damping of structures vibrating at resonance: An iterative complex eigensolution method based on damping-stress relation.” Comput. Struct., 85(23–24), 1858–1868.
Hall, J. F. (2006). “Problems encountered from the use (or misuse) of Rayleigh damping.” Earthquake Eng. Struct. Dyn., 35(5), 525–545.
Ikuo, T. (2001). “A study on the damping of vibrations in space structures.” Proc., Int. Association for Shell and Spatial Structures Symp. (CD-ROM, TP074), International Association for Shell and Spatial Structures Architectural Institute of Japan, Nagoya, Japan.
Jeary, A. P. (1986). “Damping in tall buildings: A mechanism and a predictor.” Earthquake Eng. Struct. Dyn., 14(5), 733–750.
Kareem, A., and Gurley, K. (1996). “Damping in structures: Its evaluation and treatment of uncertainty.” J. Wind Eng. Ind. Aerodyn., 59(2–3), 131–157.
Kume, Y., Hashimoto, F., and Maeda, S. (1982). “Material damping of cantilever beams.” J. Sound Vibr., 80(1), 1–10.
Lazan, B. J. (1953). “Effects of damping constants and stress distribution on the resonance response of members.” J. Appl. Mech. Trans. ASME, 20, 201–209.
Lazan, B. J. (1968). Damping of materials and members in structural mechanics, Pergamon, Oxford, U.K.
Leger, P., and Dussault, S. (1992). “Seismic-energy dissipation in MDOF structures.” J. Struct. Eng., 1251–1269.
Li, Q. S., Yang, K., Wong, C. K., and Jeary, A. P. (2003). “The effect of amplitude-dependent damping on wind-induced vibrations of a super tall building.” J. Wind Eng. Ind. Aerodyn., 91(9), 1175–1198.
Liang, C. F., Liu, T. J., Zou, D. J., and Yang, Q. W. (2012). “The frequency-dependent study on viscosity coefficient and loss tangent of viscoelastic materials.” Chin. J. Theor. Appl. Mech., 44(5), 933–937 (in Chinese).
Moghaddam, H. A. (2000). “Seismic behaviour of space structures.” Int. J. Space Struct., 15(2), 119–135.
NEHRP. (2010). “Nonlinear structural analysis for seismic design: A guide for practicing engineers.”, NIST, U.S. Dept. of Commerce.
PEER/ATC. (2010). “Modeling and acceptance criteria for seismic design and analysis of tall buildings.”, Applied Technology Council, Redwood City, CA.
Petrini, L., Maggi, C., Priestly, N., and Calvi, M. (2008). “Experimental verification of viscous damping model for inelastic time history analysis.” J. Earthquake Eng., 12(1), 125–145.
Ryan, K. L., and Polanco, J. (2008). “Problems with Rayleigh damping in base-isolated buildings.” J. Struct. Eng., 1780–1784.
Shome, N., and Cornell, C. A. (1999). “Probabilistic seismic demand analysis of nonlinear structures.”, Reliability of Marine Structures Program, Dept. of Civil and Environmental Engineering, Stanford Univ., Stanford, CA.
Ting, J. M., and Crawley, E. F. (1992). “Characterization of damping of materials and structures from nanostrain levels to one thousand microstrain.” AIAA J., 30(7), 1856–1863.
Weaver, W., and Johnston, P. R. (1987). Structural dynamics by finite elements, Prentice-Hall, Englewood Cliffs, NJ.
Woodhouse, J. (1998). “Linear damping models for structural vibration.” J. Sound Vibr., 215(3), 547–569.
Wu, J. R., Liu, P. F., and Li, Q. S. (2007). “Effects of amplitude-dependent damping and time constant on wind-induced response of super tall building.” Comput. Struct., 85(15–16), 1165–1176.
Zareian, F., and Medina, R. A. (2010). “A practical method for proper modeling of structural damping in inelastic plane structural systems.” Comput. Struct., 88(1–2), 45–53.
Zhang, H. D., and Wang, Y. F. (2012). “Energy-based numerical evaluation for seismic performance of a high-rise steel building.” Steel Compos. Sturct., 13(6), 501–519.
Zhang, H. D., Wang, Y. F., and Jiang, H. (2009). “Effect of different parameters on seismic performance of complex damping structures.” Chin. J. Build. Struct., 30, 94–100 (in Chinese).
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 2, 2013
Accepted: Jun 30, 2014
Published online: Aug 18, 2014
Discussion open until: Jan 18, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.