Strength of an Aluminum Column Web in Tension
Publication: Journal of Structural Engineering
Volume 141, Issue 7
Abstract
The component method is widely recognized as a suitable tool for the prediction of the mechanical response of beam-to-column steel joints. Recently, this method has been extended also to aluminum structures. For some joint components, i.e., the ones based on equivalent T-stubs, the formulations traditionally given for steel have been properly adapted to aluminum by using some corrective factors which have been calibrated on the basis of experimental and numerical analyses. On the contrary, due to the lack of exhaustive studies in literature, other joint components have been preliminarily extended to aluminum by simply proposing the same expressions used for steel. Nevertheless, this type of assumption may lead to an inappropriate evaluation of the actual strength. Therefore, the current paper aims at developing suitable formulations for predicting the strength of an aluminum column web in tension, on the basis of calibrated FE numerical models. The results of a parametric analysis, implemented by varying the mechanical features of the base material, are presented, including also the influence of the heat-affected zones. Finally, the results of a sensitivity analysis on the column axial load are shown. Therefore, based on the obtained outcomes some refined formulations are suggested and proposed for possible implementation in existing codes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aribert, J. M., Lauchal, A., and Nawawy, O. I. (1981). “Elastic-plastic modelization of the resistance of a column in the compression region.” Constr. Met., 2, 122–131 (in French).
Brando, G., and De Matteis, G. (2011). “Experimental and numerical analysis of a multi-stiffened pure aluminium shear panel.” Thin-Walled Struct., 49(10), 1277–1287.
CNR-DT. (2011). “Istruzioni per la progettazione, l’esecuzione ed il controllo di strutture di alluminio (in Italian).”, Rome, Italy.
De Matteis, G., Brescia, M., Formisano, A., and Mazzolani, F. M. (2009). “Behaviour of welded aluminium T-stub joints under monotonic loading.” Comput. Struct., 87(15–16), 990–1002.
De Matteis, G., Mandara, A., and Mazzolani, F. M. (2000). “T-stub aluminum joints: Influence of behavioural parameters.” Comput. Struct., 78(1), 311–327.
De Matteis, G., Naqash, M. T., and Brando, G. (2012). “Effective length of aluminium T-stub connections by parametric analysis.” Eng. Struct., 41, 548–561.
EN. (2003). “Eurocode 3, design of steel structures—Part 1–8: Design of joints.”, CEN, Brussels, Belgium.
EN. (2007). “Eurocode 9, design of aluminium structures—Part 1–1: General structural rules.”, CEN, Brussels, Belgium.
Faella, C., Piluso, V., and Rizzano, G. (1999). Structural steel semirigid connections, CRC Press, Boca Raton, FL.
Graham, J. D., Sherbourne, A. N., and Khabbaz, R. N. (1959). Welded interior beam to column connections, American Institute of Steel Construction, Chicago.
Hibbitt, H. D., Karlsson, B. I., and Sorensen, P. E. (1997). ABAQUS theory manual version 5.7, Dassault Systèmes Simulia, Providence, RI.
Matusiak, M. (1999). “Strength and ductility of welded structures in aluminium alloys.” Ph.D. thesis, Dept. of Structural Engineering, Norwegian Univ. of Science and Technology (NTNU), Trondheim, Norway.
Mazzolani, F. M. (1995). Aluminium alloy structures, 2nd Ed., E & FN Spon, London.
Ramberg, W., and Osgood, W. R. (1943). “Description of stress-strain curves by three parameters.”, National Advisory Committee for Aeronautics, Washington, DC, 1–22.
Rasmussen, K. J. R., and Rondal, J. (2000). “Strength curves for aluminium alloy columns.” Eng. Struct., 22(11), 1505–1517.
Soetens, F. (1987). Welded connections in aluminium alloy structures, HERON, Delft, The Netherlands.
Soetens, F. (1992). “Welded connections.” Chapter 5, Aluminium structural analysis—Recent European advances, P. S. Bulson, ed., Taylor and Francis, Milton Park, Oxon, U.K.
Wang, T., Hopperstad, O. S., Lademo, O.-G., and Larsen, P. K. (2007). “Finite element analysis of welded beam-to-column joints in aluminium alloy ENAW6082 T6.” Finite Elem. Anal. Des., 44(1–2), 1–16.
Wang, T., Hopperstad, O. S., Larsen, P. K., and Lademo, O.-G. (2006). “Evaluation of a finite element modelling approach for welded aluminium structures.” Comput. Struct., 84(29–30), 2016–2032.
Witteveen, J., Stark, J. W. B., Bijlaard, F. S. K., and Zoetemeijer, P. (1982). “Welded and bolted beam-to-column connections.” J. Struct. Div., 108(ST2), 433–455.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 6, 2013
Accepted: Jun 11, 2014
Published online: Aug 18, 2014
Discussion open until: Jan 18, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.