Failure Behavior of a Top and Seat Angle Bolted Steel Connection with Double Web Angles
Publication: Journal of Structural Engineering
Volume 141, Issue 7
Abstract
The article presents a three-dimensional nonlinear finite-element model that was developed for the study of a top and seat angle bolted steel connection with double web angles. Unilateral contact and friction laws were used to simulate the interaction among the connected parts. Large displacements as well as the von Mises failure criterion were also considered for the steel parts and bolts. Numerical results were compared with the experimental research conducted on the same steel joint. This study finds yielding of the top angle as well as shear failure of the bolts connecting the beam bottom flange with the seat angle to be very important for the overall response of the structure. For this reason, a parametric investigation of the influence of the top angle on the behavior of the structure and the study of the prying forces developed at the top angle were conducted.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to gratefully acknowledge useful discussions with MSc-Eng. Elias Vassilas and the help of Mrs. Anne McKay with the English language.
References
Abdalla, K. M., and Chen, W. F. (1995). “Expanded database of semi-rigid steel connections.” Comput. Struct., 56(4), 553–564.
Abdalla, K. M., Kaziolas, D. N., Badarneh, M. A., and Baniotopoulos, C. C. (2011). “Experimental and numerical investigation of the structural response of top and seated angle with double web angle bolted connections.” Pollack Periodica, 6(1), 73–86.
Ahmed, A., Kishi, N., Matsuoka, K., and Komuro, M. (2001). “Nonlinear analysis on prying of top- and seat-angle connections.” J. Appl. Mech., 4, 227–236.
Attiogbe, G., and Morris, G. (1991). “Moment-rotation functions for steel connections.” J. Struct. Eng., 1703–1718.
Badarneh, M. A. (2004). “Unilateral contact problem and prying force in top and seat angle connection with double web angle.” M.S. thesis, Jordan Univ. of Science and Technology, Irbid, Jordan.
BuildSoft. (2014). “Powerconnect.” 〈http://www.buildsoft.eu/en/product/powerconnect〉 (Feb. 17, 2014).
Calado, L., De Matteis, G., and Landolfo, R. (2000). “Experimental response of top and seat angle semi-rigid steel frame connections.” Mater. Struct., 33(8), 499–510.
Citipitioglu, A. M., Haj-Ali, R. M., and White, D. W. (2002). “Refined 3D finite element modeling of partially restrained connections including slip.” J. Constr. Steel Res., 58(5–8), 995–1013.
Diaz, C., Marti, P., Victoria, M., and Querin, O. M. (2011). “Review on the modelling of joint behavior in steel frames.” J. Constr. Steel Res., 67(5), 741–758.
Dinger, G., and Friedrich, C. (2011). “Avoiding self-loosening failure of bolted joints with numerical assessment of local contact state.” Eng. Fail. Anal., 18(8), 2188–2200.
Elnashai, A. S., Elghazouli, A. Y., and Denesh-Ashtiani, F. A. (1998). “Response of semirigid steel frames to cyclic and earthquake loads.” J. Struct. Eng., 857–867.
European Union. (2005). “Eurocode 3: Design of steel structures—Part 1-8: Design of joints.”, Brussels, Belgium.
Gantes, C. J., and Lemonis, M. E. (2003). “Influence of equivalent bolt length in finite element modeling of T-stub steel connections.” Comput. Struct., 81(8–11), 595–604.
Lemonis, M. E., and Gantes, C. J. (2009). “Mechanical modeling of the nonlinear response of beam-to-column joints.” J. Constr. Steel Res., 65(4), 879–890.
Mistakidis, E. S., and Stavroulakis, G. E. (1998). Nonconvex optimization in mechanics, algorithms, heuristics and engineering applications by the F.E.M., Springer/Kluwer, Dordrecht, Boston.
Panagiotopoulos, P. D. (1985). Inequality problems in mechanics and applications. Convex and nonconvex energy functions, Birkh¨auser, Boston, Basel, Stuttgart.
Pirmoz, A., Saedi, D. A., Mazaheri, A., and Ebrahim, D. H. (2008). “Behavior of bolted angle connections subjected to combined shear force and moment.” J. Constr. Steel Res., 64(4), 436–446.
Pirmoz, A., Seyed Khoei, A., Mohammadrezapour, E., and Saedi Daryan, A. (2009). “Moment-rotation behavior of bolted top-seat angle connections.” J. Constr. Steel Res., 65(4), 973–984.
Sallam, H. E. M., El-Sisi, A. E. A., Matar, E. B., and El-Hussieny, O. M. (2011). “Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints.” Eng. Fail. Anal., 18(6), 1550–1558.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 16, 2013
Accepted: Jun 4, 2014
Published online: Aug 12, 2014
Discussion open until: Jan 12, 2015
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.