Stability of Z-Section Purlins Used as Temporary Struts during Construction
Publication: Journal of Structural Engineering
Volume 139, Issue 12
Abstract
The stability of Z purlins subject to combined axial force and biaxial bending due to self-weight (a situation that typically arises during construction) is investigated. Single, isolated purlins as well as purlins with one or more lines of bridging are considered. The purlin can thereby be supported at the ends in various ways: (1) a simple cleat plate connection with two bolts, (2) a semicontinuous connection obtained by lapping the purlin with an adjacent span, and (3) a cleat plate connection with fly-bracing. The beneficial effect of the end restraint provided by each of these different support conditions about both a horizontal and a vertical axis was measured experimentally. The experimental data served as input for (1) detailed finite-element models, and (2) a theoretical buckling analysis of Z-section columns. Based on this work, design guidelines are presented for Z purlins subject to combined axial force and biaxial bending.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS/CAE v6.5 [Computer software]. ABAQUS Inc., Pawtucket, RI.
American Iron, and Steel Institute. (2007). “North American specification for the design of cold-formed steel structural members.” AISI-S100, Washington, DC.
Bjorhovde, R. (1972). “Deterministic and probabilistic approaches to the strength of steel columns.” Ph.D. thesis, Lehigh Univ., Bethelehem, PA.
Heal, K. M., Hansen, M. L., and Rickard, K. M. (1996). Maple V learning guide, Springer-Verlag, Berlin.
Maple [Computer software]. Maplesoft, Waterloo, ON, Canada.
Papangelis, J. P., and Hancock, G. J. (1995). “Computer analysis of thin-walled structural members.” Comput. Struct., 56(1), 157–176.
Rasmussen, K. J. R., and Trahair, N. S. (2005). “Exact and approximate solutions for the flexural buckling of columns with oblique rotational end restraints.” Thin-Walled Struct., 43(3), 411–426.
Standards Australia. (2005). “Cold-formed steel structures.” AS/NZS 4600, Sydney, Australia.
Standards Australia. (2011). “Continuous hot-dip metallic coated steel sheet and strip-coatings of zinc and zinc alloyed with aluminium and magnesium.” AS 1397, Sydney, Australia.
ThinWall. [Computer software]. The University of Sydney, Sydney, Australia.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York.
Trahair, N. S. (1993). Flexural-torsional buckling of structures, CRC Press, Boca Raton, FL.
Young, B. (1997). “The behaviour and design of cold-formed channel columns.” Ph.D. thesis, Univ. of Sydney, Sydney, Australia.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 18, 2012
Accepted: Nov 28, 2012
Published online: Dec 1, 2012
Published in print: Dec 1, 2013
Discussion open until: Feb 5, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.