Hysteresis Model of Thin Infill Plate for Cyclic Nonlinear Analysis of Steel Plate Shear Walls
Publication: Journal of Structural Engineering
Volume 136, Issue 11
Abstract
A hysteresis model for thin infill steel plates was developed to evaluate the nonlinear cyclic behavior of steel plate shear walls. Nonlinear finite-element analysis was performed for thin steel plates with a rigid boundary frame. Based on the analysis results, the hysteretic behavior of the infill steel plate was simplified as an equivalent uniaxial stress-strain relationship in the direction of tension-field action. The proposed hysteresis model was implemented in macroscopic analysis models for infill steel plates, i.e., the tension strip model and equivalent tension brace model. The proposed method was applied to existing test specimens with various design parameters and loading conditions. The prediction results were compared with the test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper was financially supported by the Korean Ministry of Land, Transportation and Maritime Affairs (MLTM) through the High-tech Urban Development Program (HUDP) of the Korea Institute of Construction and Transportation Technology Evaluation and Planning (KICTEP); the writers are grateful to the authorities for their support.UNSPECIFIED
References
AISC. (2005). “Seismic provisions for structural steel buildings.” Chicago.
Behbahanifard, M. R. (2003). “Cyclic behavior of unstiffened steel plate shear walls.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Alta.
Berman, J., and Bruneau, M. (2003). “Plastic analysis of steel plate shear walls.” J. Struct. Eng., 129(11), 1448–1456.
Caccese, V., Elgaaly, M., and Chen, R. (1993). “Experimental study of thin steel-plate shear walls under cyclic load.” J. Struct. Eng., 119(2), 573–587.
Choi, I. R. (2009). “Seismic analysis and design of steel plate walls with thin infill plates.” Ph.D. thesis, Dept. of Architecture, Seoul National Univ., Seoul, Korea.
Choi, I. R., and Park, H. G. (2008). “Ductility and energy dissipation capacity of shear-dominated steel plate walls.” J. Struct. Eng., 134(9), 1495–1507.
Driver, R. G., Kulak, G. L., Kennedy, D. J. L., and Elwi, A. E. (1997). “Seismic behavior of steel plate shear walls.” Structural Engineering Rep. No. 215, Dept. of Civil Engineering, Univ. of Alberta, Edmonton, Alta.
Elgaaly, M. (1998). “Thin steel plate shear walls behavior and analysis.” Thin-Walled Struct., 32, 151–180.
Elgaaly, M., Caccese, V., and Du, C. (1993). “Postbuckling behavior of steel-plate shear walls under cyclic loads.” J. Struct. Eng., 119(2), 588–605.
Elgaaly, M., and Liu, Y. (1997). “Analysis of thin-steel-plate shear walls.” J. Struct. Eng., 123(11), 1487–1496.
Galambos, T. V., ed. (1998). Guide to stability design criteria for metal structures, 5th Ed., Structural Stability Research Council (SSRC), Wiley, New York, 139–143.
Hibbitt, Karlsson, and Sorenson Inc. (HKS). (2006). ABAQUS standard: Version 6.6, HKS, Pawtucket, R.I.
Kennedy, D. J. L., Kulak, G. L., and Driver, R. G. (1994). “Discussion of ‘Post-buckling behavior of steel-plate shear walls under cyclic loads’ by M. Elgaaly, V. Caccese and C. Du.” J. Struct. Eng., 120(7), 2250–2251.
Lubell, A. S., Prion, H. G. L., Ventura, C. E., and Rezai, M. (2000). “Unstiffened steel plate shear wall performance under cyclic loading.” J. Struct. Eng., 126(4), 453–460.
Mazzoni, S., et al. (2006). Open system for earthquake engineering simulation, user command—Language manual: Version 1.7.3, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif., ⟨http://opensees.berkley.edu/OpenSees/manuals/usermanual/index.html⟩.
Menegotto, M., and Pinto, P. E. (1973). “Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and nonelastic behavior of elements under combined normal force and bending.” Proc., IABSE Symp. on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Int. Association for Bridge and Structural Engineering, Zurich, Switzerland, 112–123.
Park, H. G., Kwack, J. H., Jeon, S. W., Kim, W. K., and Choi, I. R. (2007). “Framed steel plate wall behavior under cyclic lateral loading.” J. Struct. Eng., 133(3), 378–388.
Qu, B., Bruneau, M., Lin, C. H., and Tsai, K. C. (2008). “Testing of full-scale two-story steel plate shear wall with reduced beam section connections and composite floors.” J. Struct. Eng., 134(3), 364–373.
Rezai, M. (1999). “Seismic behavior of steel plate shear wall by shake table testing.” Ph.D. thesis, Univ. of British Columbia, Vancouver, B.C.
Roberts, T. M., and Sabouri-Ghomi, S. (1991). “Hysteretic characteristics of unstiffened plate shear panels.” Thin-Walled Struct., 12, 145–162.
Shishkin, J. J., Driver, R. G., and Grondin, G. Y. (2009). “Analysis of steel plate shear walls using the modified strip model.” J. Struct. Eng., 135(11), 1357–1366.
Thorburn, L. J., Kulak, G. L., and Montgomery, C. J. (1983). “Analysis and design of steel shear wall system.” Structural Engineering Rep. No. 107, Dept. of Civil Engineering, Univ. of Alberta, Alta.
Timler, P. A., and Kulak, G. L. (1983). “Experimental study of steel plate shear walls.” Structural Engineering Rep. No. 114, Dept. of Civil Engineering, Univ. of Alberta, Alta.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Dec 1, 2009
Accepted: May 22, 2010
Published online: May 29, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.