Nonlinear Finite-Element Analysis for Hysteretic Behavior of Thin-Walled Circular Steel Columns with In-Filled Concrete
Publication: Journal of Structural Engineering
Volume 136, Issue 11
Abstract
The strength and ductility of thin-walled steel columns under cyclic loads are considerably upgraded by filling concrete into hollow spaces surrounded by steel tube and diaphragms. The above thin-walled steel columns filled with concrete are referred here to as thin-walled CFT columns. Up to the present, no sufficient and precise research has been conducted on the versatile finite-element model (FE model) analysis that can take into account the upgrading mechanism of thin-walled CFT columns in a direct manner. Herein, an accurate FE model is investigated in order to fully include the important factors such as cyclic local buckling of steel tube, nonlinear behavior of confined concrete, and interface action between steel tube and in-filled concrete. The validity of the proposed models is examined by comparing with the results of cyclic loading experiments on CFT columns. With the proposed model, the effect of in-filled concrete on the upgrading mechanism of thin-walled CFT columns is discussed in detail.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. (2006). Standard 6.6 user’s manual, Hibbit, Karlson & Sorensen, Inc., Paris.
American Concrete Institute (ACI). (1999). “Building code requirement for structural concrete and commentary.” ACI318-99, Detroit.
American Concrete Institute (ACI). (2001). “ACI code issues—Coefficient of friction: Concrete to concrete.” ⟨http://www.eng-tips.com/viewthread.cfm?qid=11539⟩ (September 2001).
Aval, S. B. B., Saadeghvaziri, M. A., and Golafshani, A. A. (2002). “Comprehensive composite inelastic fiber element for cyclic analysis of concrete-filled steel tube columns.” J. Eng. Mech., 128(4), 428–437.
Chen, W. F. (1982). Plasticity in reinforced concrete, McGraw-Hill, New York.
Elremaily, A., and Azizinamini, A. (2002). “Behavior and strength of circular concrete-filled tube columns.” J. Constr. Steel Res., 58, 1567–1591.
Fam, A., Qie, F. S., and Rizkalla, S. (2002). “Concrete-filled steel tubes subjected to axial compression and lateral cyclic loads.” J. Struct. Eng., 130(4), 631–640.
Ge, H., and Usami, T. (1996). “Cyclic test of concrete filled steel box columns.” J. Struct. Eng., 122(10), 1169–1177.
Goto, Y., Jiang, K., and Obata, M. (2006). “Stability and ductility of thin-walled circular steel columns under cyclic bidirectional loading.” J. Struct. Eng., 132(10), 1621–1631.
Goto, Y., Muraki, M., and Obata, M. (2009). “Ultimate state of thin-walled circular steel columns under bi-directional seismic accelerations.” J. Struct. Eng., 135(12), 1481–1490.
Goto, Y., Wang, Q. Y., and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled columns.” J. Struct. Eng., 124(11), 1290–1301.
Hajjar, J. F., Molodan, A., and Schiller, P. H. (1998). “A distributed plasticity model for cyclic analysis of concrete-filled steel tube beam columns and composite frames.” Eng. Struct., 20(4–6), 398–412.
Inai, E., Mukai, A., Kai, M., Tokinoya, H., Fukumoto, T., and Mori, K. (2004). “Behavior of concrete-filled steel tube beam columns.” J. Struct. Eng., 130(2), 189–202.
Ishikawa, N., Kobayashi, Y., Kurihara, M., Osawa, K., and Toyoda, M. (1999). “Ductile crack initiation behavior of structural steel under cyclic loading.” Tetsu to Hagane, 85(1), 71–77 (in Japanese).
Iura, M., Orino, A., and Ishizawa, T. (2002). “Elasto-plastic behavior of concrete-filled steel tubular columns.” J. Struct. Mech. and Earthquake Engrg., JSCE, 696(58), 285–298 (in Japanese).
Japan Society of Civil Engineers (JSCE). (2002). Standard specifications for concrete structures-2002, seismic performance verification, Japan Society of Civil Engineers, Tokyo (in Japanese).
Japan Society of Civil Engineers (JSCE) Committee on Steel Structure. (1996). Seismic design guideline proposal and new technology for steel bridges, Japan Society of Civil Engineers, Tokyo (in Japanese).
Johansson, M., and Gylltoft, K. (2001). “Structural behavior of slender circular steel-concrete composite columns under various means of load application.” Steel Compos. Struct., 1(4), 393–410.
Lee, J., and Fenves, G. L. (1998). “Plastic-damage model for cyclic loading of concrete structures.” J. Eng. Mech., 124(8), 892–900.
Matsumura, T., and Mizuno, E. (2007). “3-D FEM analyses on internal state inside the concrete filled steel tubular columns subjected to flexural deformation under axial loading.” J. Struct. Eng. JSCE, 53A, 75–83 (in Japanese).
Morishita, M., Aoki, T., and Suzuki, M. (2000). “Experimental study on the seismic resistance performance of concrete-filled steel tubular columns.” J. Struct. Eng. JSCE, 46A, 75–83 (in Japanese).
Public Work Research Institute. (1997–2000 ). Rep. of Cooperative Research on Limit State Seismic Design for Bridge Piers, I–VIII and summary, Public Work Research Institute, Ibaraki.
Sakino, K., Nakahara, H., Morino, S., and Nishiyama, I. (2004). “Behavior of centrally loaded concrete-filled steel-tube short columns.” J. Struct. Eng., 130(2), 180–188.
Susantha, K. A. S., Ge, H., and Usami, T. (2002). “Cyclic analysis and capacity prediction of concrete-filled steel box columns.” Earthquake Eng. Struct. Dyn., 31, 195–216.
Varma, A. H., Ricles, J. M., Sause, R., and Lu, L. -W. (2002). “Seismic behavior and modeling of high strength composite concrete-filled steel tube (CFT) beam-columns.” J. Constr. Steel Res., 58, 725–758.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Sep 14, 2009
Accepted: Apr 21, 2010
Published online: Apr 30, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.