Dynamic Identification of a Concrete Bridge with Orthotropic Plate-Type Deck
Publication: Journal of Structural Engineering
Volume 136, Issue 5
Abstract
This paper continues a line of research aimed at the development of a dynamically based health condition monitoring of bridge structures in the area of Friuli Venezia Giulia, Italy. One subject of this research program has been a two-span highway bridge with a concrete slab supported by closely spaced precast beams, a constructive typology which is quite diffuse in the regional highway network. Forced-vibration tests and experimental modal analysis were used to determine the vibration properties of the structure. An identification procedure based on dynamic data allowed to define an accurate orthotropic plate model of the deck and to improve the description of some constructional details in the finite-element model of the bridge such as the boundary conditions on abutments and the connection between the deck and pier. The usefulness of the combined experimental and analytical process in the identification of structural properties has been proven and the procedure can be applied to other structures of the same typology.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the cooperation of Dr. Flavio Drigani and Dr. Marino Donada (Autovie Venete S.p.A.) and Dr. Paolo Panzeri (P&P Consulting Engineers, Bergamo, Italy). Support for the experimental part of the research program was provided by the company Autovie Venete S.p.A.
References
Aktan, A. E., Catbas, N., Türer, A., and Zhang, Z. (1998). “Structural identification: Analytical aspects.” J. Struct. Eng., 124(7), 817–829.
Aktan, A. E., Farhey, D. N., Helmicki, A. J., Brown, D. L., Hunt, V. J., Lee, K. -L., and Levi, A. (1997). “Structural identification for condition assessment: Experimental arts.” J. Struct. Eng., 123(12), 1674–1684.
Allemang, R. J., and Brown, D. L. (1982). “Correlation coefficient for modal vector analysis.” Proc., 1st Int. Modal Analysis Conf., Orlando, Fla., 110–116.
Bakht, B., and Jaeger, L. G. (1990). “Bridge testing—A surprise every time.” J. Struct. Eng., 116(5), 1370–1383.
Beolchini, G. C., and Vestroni, F. (1997). “Experimental and analytical study of dynamic behavior of a bridge.” J. Struct. Eng., 123(11), 1506–1511.
Brownjohn, J. M. W., Moyo, P., Omenzetter, P., and Yong, L. (2003). “Assessment of highway bridge upgrading by dynamic testing and finite-element model updating.” J. Bridge Eng., 8(3), 162–172.
Calcada, R., Cunha, A., and Delgado, R. (2002). “Dynamic analysis of metallic arch railway bridge.” J. Bridge Eng., 7(4), 214–222.
Catbas, F. N., Ciloglu, S. K., Hasancebi, O., Grimmelsman, K., and Aktan, A. E. (2007). “Limitations in structural identification of large constructed structures.” J. Struct. Eng., 133(8), 1051–1066.
Clough, R., and Penzien, J. (1993). Dynamics of structures, McGraw-Hill, New York.
Courant, R., and Hilbert, D. (1953). Methods of mathematical physics, Interscience Publishers, Inc., New York
Douglas, B. M., and Reid, W. H. (1982). “Dynamic tests and system identification of bridges.” J. Struct. Eng., 108(10), 2295–2311.
Ewins, D. J. (2000). Modal testing: Theory, practice and application, 2nd Ed., Research Studies Press, Baldock, Hertfordshire, U.K.
Farrar, C. R., and James, G. H., III. (1997). “System identification from ambient vibration measurements on a bridge.” J. Sound Vibrat., 205(1), 1–18.
Gentile, C., and Martinez y Cabrera, F. (1997). “Dynamic investigation of a repaired cable-stayed bridge.” Earthquake Eng. Struct. Dynam., 26, 41–59.
Gladwell, G. M. L. (2004). “Inverse problems in vibration.” Solid mechanics and its applications series, 2nd Ed., Vol. 119, Kluwer Academic, Dordrecht, The Netherlands.
Hart, G. C., and Yao, J. T. P. (1977). “System identification in structural dynamics.” J. Eng. Mech., 103(6), 1089–1104.
Huber, M. T. (1929). Probleme der statik technisch wichtiger orthotroper platten, Warsaw.
Hughes, T. J. R. (1987). The finite-element method, Dover, New York.
Jaishi, B., and Ren, W. -X. (2005). “Structural finite-element model updating using vibration test results.” J. Struct. Eng., 131(4), 617–628.
Lee, P. K. K., Ho, D., and Chung, H. -W. (1987). “Static and dynamic tests of concrete bridge.” J. Struct. Eng., 113(1), 61–73.
Marcuzzi, A. (2007). “Identificazione dinamica di un ponte autostradale.” Eng. thesis, Univ. of Udine, Udine, Italy (in Italian).
Matildi, P., and Mele, M. (1972). Impalcati a piastra ortotropa ed in sistema misto acciaio-calcestruzzo, Italsider Technical and Scientific Books, Genova, Italy (in Italian).
Mazurek, D. F., and DeWolf, J. T. (1990). “Experimental study of bridge monitoring technique.” J. Struct. Eng., 116(9), 2532–2549.
Morassi, A., and Tonon, S. (2008a). “Experimental and analytical study of a steel-concrete bridge.” J. Vib. Control, 14(6), 771–794.
Morassi, A., and Tonon, S. (2008b). “Dynamic testing for structural identification of a bridge.” J. Bridge Eng., 13(6), 573–585.
Morassi, A., and Vestroni, F. (2008). “Dynamic methods for damage identification in structures.” CISM courses and lectures, Vol. 499, A. Morassi and F. Vestroni, eds., Springer, Wien, Austria.
Natke, H. G. (1982). Identification of vibrating structures, Springer, Wien, Austria.
Parloo, E., Cauberghe, B., Benedettini, F., Alaggio, R., and Guillaume, P. (2005). “Sensitivity-based operational mode shape normalisation: Application to a bridge.” Mech. Syst. Signal Process., 19(1), 43–55.
Ren, W. -X., and Zong, Z. -H. (2004). “Output-only modal parameter identification of civil engineering structures.” Struct. Eng. Mech., 17(3–4), 429–444.
Salane, H. J., and Baldwin, J. W., Jr. (1990). “Identification of modal properties of bridges.” J. Struct. Eng., 116(7), 2008–2021.
Salawu, O. S., and Williams, C. (1995). “Bridge assessment using forced vibration testing.” J. Struct. Eng., 121(2), 161–172.
Teughels, A., and De Roeck, G. (2004). “Structural damage identification of the highway bridge Z24 by FE model updating.” J. Sound Vibrat., 278(3), 589–610.
Timoshenko, S. P., and Woinowsky-Krieger, S. (1982). Theory of plates and shells, 2nd Ed., McGraw-Hill, Tokyo.
Tonon, S. (2005). “Interpretazione di prove dinamiche su ponti dell’autostrada A28 Pordenone-Conegliano.” Eng. thesis, Univ. of Udine, Udine, Italy (in Italian).
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 8, 2008
Accepted: Nov 2, 2009
Published online: Apr 15, 2010
Published in print: May 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.