Simplified Damage Assessment Method for Buried Structures against External Blast Load
Publication: Journal of Structural Engineering
Volume 136, Issue 5
Abstract
Decoupling of soil-structure interaction is applied to analyze buried structure damage due to external blast load. The structural element under analysis is assumed to deform as a simply supported rigid-plastic beam. Shear failure, bending failure, and combined failure modes are considered based on five transverse velocity profiles. With proper failure criteria, the critical equations for structural shear and bending failures are derived respectively. Pressure-impulse diagrams are then developed to assess damage of the buried structures. Comparison has been made to show the influences of the soil-structure interaction and the shear-to-bending strength ratio of the buried structure. A case study has been conducted to a buried reinforced concrete box-type structure which shows that the proposed analysis method can be effectively applied.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alves, M., and Jones, N. (2002). “Impact failure of beams using damage mechanics. Part I: Analytical model.” Int. J. Impact Eng., 27(8), 837–861.
Campidelli, M., and Viola, E. (2007). “An analytical–numerical method to analyze single degree of freedom models under airblast loading.” J. Sound Vib., 302, 260–286.
de Oliveira, J. G. (1982). “Beams under lateral projectile impact.” J. Engrg. Mech. Div., 108(1), 51–71.
de Oliveira, J. G., and Jones, N. (1978). “Some remarks on the influence of transverse shear on the plastic yielding of structures.” Int. J. Mech. Sci., 20, 759–765.
de Oliveira, J. G., and Jones, N. (1979). “A numerical procedure for the dynamic plastic response of beams with rotator inertia and transverse shear effects.” J. Struct. Mech, 7(2), 193–230.
Fallah, A. S., and Louca, L. A. (2007). “Pressure–impulse diagrams for elastic-plastic-hardening and softening single-degree-of-freedom models subjected to blast loading.” Int. J. Impact Eng., 34(4), 823–842.
Jones, N. (1989). Structural impact, Cambridge University Press, Cambridge, U.K.
Jones, N., and de Oliveira, J. G. (1979). “The influence of rotator inertia and transverse shear on the dynamic plastic behavior of beams.” J. Appl. Mech., 46(2), 303–310.
Jones, N., and Jones, C. (2002). “Inelastic failure of fully clamped beams and circular plates under impact loading. Proceedings of the Institution of Mechanical Engineers. Part C.” J. Mech. Eng. Sci., 216(2), 133–149.
Jones, N., and Song, B. (1986). “Shear and bending response of a rigid plastic beam to partly distributed blast type loading.” Mech. Based Des. Struct. Mach., 14(3), 275–320.
Krauthammer, T. (1998). “Blast mitigation technologies: developments and numerical considerations for behavior assessment and design.” Proc., Int. Conf. on Structures under Shock and Impact, SUSI, Melbourne, Australia, 1–10.
Krauthammer, T., Bazeos, N., and Holmquist, T. J. (1986). “Modified SDOF analysis of RC box-type structures.” J. Struct. Eng., 112(4), 726–744.
Lellep, J., and Torn, K. (2005). “Shear and bending response of a rigid-plastic beam subjected to impulsive loading.” Int. J. Impact Eng., 31(9), 1081–1105.
Li, Q. M., and Jones, N. (2005a). “Foundation of correlation parameters for eliminating pulse shape effects on dynamic plastic response of structures.” ASME Trans. J. Appl. Mech., 72(2), 172–176.
Li, Q. M., and Jones, N. (2005b). “Shear and adiabatic shear failures in an impulsively loaded fully clamped beam.” Int. J. Impact Eng., 31(7), 877–893.
Li, Q. M., and Meng, H. (2002a). “Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-of-freedom model.” J. Eng. Mech., 128(1), 87–92.
Li, Q. M., and Meng, H. (2002b). “Pulse loading shape effects on pressure–impulse diagram of an elastic-plastic, single-degree-of-freedom structural model.” Int. J. Mech. Sci., 44, 1985–1998.
Ma, G. W., Shi, H. J., and Shu, D. W. (2007). “P-I diagram method for combined failure modes of rigid-plastic beams.” Int. J. Impact Eng., 34, 1081–1094.
Martin, J. B., and Symonds, P. S. (1966). “Mode approximation for impulsively loaded rigid plastic structures.” J. Engrg. Mech. Div., 92(EM5), 43–66.
Smith, P. D., and Hetherington, J. G. (1994). Blast and ballistic loading of structures, Laxton’s, Stoneham, Mass.
Symond, P. S., and Chon, C. T. (1979). “Large viscoplastic deflections of impulsively loaded plane frames.” Int. J. Solids Struct., 15(1), 15–31.
Symonds, P. S. (1968). “Plastic shear deformations in dynamic load problems.” Engineering plasticity, Cambridge University Press, Cambridge.
U.S. Department of Army. (1986). “Fundamentals of protective design for conventional weapons.” Rep. No. TM5-855-1, N.J., 1–120.
U.S. Department of Army. (1990). “Structures to resist the effects of the accidental explosions.” Rep. No. TM5-1300, N.J.
Weidlinger, P., and Hinman, E. (1988). “Analysis of underground protective structures.” J. Struct. Eng., 114(7), 1658–1673.
Wolf, J. P. (1985). Dynamic soil-structure interaction, Prentice-Hall, Englewood Cliffs, N.J.
Youngdahl, C. K. (1970). “Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformation.” ASME J. Appl. Mech., 37, 744–752.
Youngdahl, C. K. (1971). “Influence of pulse shape on the final plastic deformation of a circular plate.” Int. J. Solids Struct., 7, 1127–1142.
Yu, J. L., and Norman, J. (1991). “Further experiment investigations on the failure of clamped beams under impact loads.” Int. J. Solids Struct., 27(9), 1113–1137.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 19, 2008
Accepted: Oct 28, 2009
Published online: Oct 29, 2009
Published in print: May 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.