Compressive Strength Prediction of Nanosilica-Incorporated Cement Mixtures Using Adaptive Neuro-Fuzzy Inference System and Artificial Neural Network Models
Publication: Practice Periodical on Structural Design and Construction
Volume 25, Issue 3
Abstract
In recent years, through the development of nanoscience and technology, new ideas have emerged for enhancing the performance of cement composites. In this regard, nanomodified mixes, particularly those with nanosilica, have found a special position. However, there are challenges in using nanosilica in cement mixes, such as high price and workability problems. Thus, these materials must be consumed at certain levels to reach goal characteristics. In addition, there are complications in the properties and interactions of materials, which make it difficult to find a simple model for the prediction of concrete properties. In the present study, it has been tried to predict the compressive strength of cement composites utilizing artificial intelligent approaches, including an adaptive neuro-fuzzy inference system (ANFIS), artificial neural network (ANN) technique, and linear and nonlinear regression analyses. ANFIS and ANN are highly reliable methods for predicting the various properties of concrete; thus, these methods have been used extensively in concrete research. However, similar studies were not found on using these methods for prediction of compressive strength of cement mixtures with nanosilica. This study has utilized these methods to provide a comparison between the ANFIS and ANN models in predicting the strength of cementitious mixes and show the capability of the models of ANFIS and ANN compared with the traditional regression methods. For this purpose, the mix proportions and the quantity and size of nanosilica have been considered as input parameters, with the compressive strength of mortars as output parameters. The results indicate that ANN and ANFIS outperformed the regression analyses. Based on the obtained results, ANN had higher accuracy in predicting the compressive strength.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request (code files and source documents used in gathering data).
References
Adhikary, B. B., and H. Mutsuyoshi. 2006. “Prediction of shear strength of steel fiber RC beams using neural networks.” Constr. Build. Mater. 20 (9): 801–811. https://doi.org/10.1016/j.conbuildmat.2005.01.047.
Ahmadi-Nedushan, B. 2012. “Prediction of elastic modulus of normal and high strength concrete using ANFIS and optimal nonlinear regression models.” Constr. Build. Mater. 36 (Nov): 665–673. https://doi.org/10.1016/j.conbuildmat.2012.06.002.
Alshihri, M. M., A. M. Azmy, and M. S. El-Bisy. 2009. “Neural networks for predicting compressive strength of structural light weight concrete.” Constr. Build. Mater. 23 (6): 2214–2219. https://doi.org/10.1016/j.conbuildmat.2008.12.003.
Amani, J., and R. Moeini. 2012. “Prediction of shear strength of reinforced concrete beams using adaptive neuro-fuzzy inference system and artificial neural network.” Sci. Iranica 19 (2): 242–248. https://doi.org/10.1016/j.scient.2012.02.009.
Asteris, P., K. Kolovos, M. Douvika, and K. Roinos. 2016. “Prediction of self-compacting concrete strength using artificial neural networks.” Supplement, Eur. J. Environ. Civ. Eng. 20 (S1): 102–122. https://doi.org/10.1080/19648189.2016.1246693.
ASTM. 2008. Standard specification for flow table for use in tests of hydraulic cement. ASTM C230. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). ASTM C109. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard specification for portland cement.” ASTM C150/C150M-17. West Conshohocken, PA: ASTM.
Bagheri, A., T. Parhizkar, H. Madani, and A. Raisghasemi. 2013. “The influence of pyrogenic nanosilicas with different surface areas and aggregation states on cement hydration.” Asian J. Civ. Eng. 14 (6): 783–796.
Bahadori, H., and P. Hosseini. 2012. “Reduction of cement consumption by the aid of silica nano-particles (investigation on concrete properties).” J. Civ. Eng. Manage. 18 (3): 416–425. https://doi.org/10.3846/13923730.2012.698912.
Belkowitz, J. S., W. B. Belkowitz, K. Nawrocki, and F. T. Fisher. 2015. “Impact of nanosilica size and surface area on concrete properties.” ACI Mater. J. 112 (3): 419–427. https://doi.org/10.14359/51687397.
Bilim, C., C. D. Atiş, H. Tanyildizi, and O. Karahan. 2009. “Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network.” Adv. Eng. Software 40 (5): 334–340. https://doi.org/10.1016/j.advengsoft.2008.05.005.
Chithra, S., S. S. Kumar, K. Chinnaraju, and F. A. Ashmita. 2016. “A comparative study on the compressive strength prediction models for high performance concrete containing nano silica and copper slag using regression analysis and artificial neural networks.” Constr. Build. Mater. 114 (Jul): 528–535. https://doi.org/10.1016/j.conbuildmat.2016.03.214.
Dantas, A. T. A., M. B. Leite, and K. de Jesus Nagahama. 2013. “Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks.” Constr. Build. Mater. 38 (Jan): 717–722. https://doi.org/10.1016/j.conbuildmat.2012.09.026.
Duan, Z.-H., S.-C. Kou, and C.-S. Poon. 2013. “Prediction of compressive strength of recycled aggregate concrete using artificial neural networks.” Constr. Build. Mater. 40 (Mar): 1200–1206. https://doi.org/10.1016/j.conbuildmat.2012.04.063.
Fausett, L. 1994. Fundamentals of neural networks: Architectures, algorithms, and applications. Upper Saddle River, NJ: Prentice Hall.
Gaitero, J. J., I. Campillo, and A. Guerrero. 2008. “Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles.” Cem. Concr. Res. 38 (8–9): 1112–1118. https://doi.org/10.1016/j.cemconres.2008.03.021.
Ghafari, E., M. Arezoumandi, H. Costa, and E. Julio. 2015. “Influence of nano-silica addition on durability of UHPC.” Constr. Build. Mater. 94 (Sep): 181–188. https://doi.org/10.1016/j.conbuildmat.2015.07.009.
Givi, A. N., S. A. Rashid, F. N. A. Aziz, and M. A. M. Salleh. 2010. “Experimental investigation of the size effects of nano-particles on the mechanical properties of binary blended concrete.” Composites Part B 41 (8): 673–677. https://doi.org/10.1016/j.compositesb.2010.08.003.
Hou, P., S. Kawashima, D. Kong, D. J. Corr, J. Qian, and S. P. Shah. 2013. “A comparative study on the compressive strength prediction models for high performance concrete containing nano silica and copper slag using regression analysis and artificial neural networks.” Composites Part B 114 (Jul): 528–535. https://doi.org/10.1016/j.conbuildmat.2016.03.214.
Jalal, M., E. Mansouri, M. Sharifipour, and A. R. Pouladkhan. 2012. “Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks.” Mater. Des. 38 (Jan): 717–722. https://doi.org/10.1016/j.conbuildmat.2012.09.026.
Jang, J.-S. 1993. “Prediction of compressive strength of recycled aggregate concrete using artificial neural networks.” IEEE Trans. Syst. Man Cybern. 40 (Mar): 1200–1206. https://doi.org/10.1016/j.conbuildmat.2012.04.063.
Jo, B.-W., C.-H. Kim, G.-H. Tae, and J.-B. Park. 2007. “Reduction of the calcium leaching rate of cement paste by addition of silica nanoparticles.” Constr. Build. Mater. 38 (8–9): 1112–1118. https://doi.org/10.1016/j.cemconres.2008.03.021.
Kazeminezhad, M., A. Etemad-Shahidi, and S. Mousavi. 2005. “Influence of nano-silica addition on durability of UHPC.” Ocean Eng. 94 (Sep): 181–188. https://doi.org/10.1016/j.conbuildmat.2015.07.009.
Khaloo, A., M. H. Mobini, and P. Hosseini. 2016. “Experimental investigation of the size effects of nano-particles on the mechanical properties of binary blended concrete.” Constr. Build. Mater. 41 (8): 673–677. https://doi.org/10.1016/j.compositesb.2010.08.003.
Khan, M. I. 2012. “Predicting properties of high performance concrete containing composite cementitious materials using artificial neural networks.” Autom. Constr. 22 (Mar): 516–524. https://doi.org/10.1016/j.autcon.2011.11.011.
Koohestani, B., T. Belem, A. Koubaa, and B. Bussiere. 2016. “Experimental investigation into the compressive strength development of cemented paste backfill containing nano-silica.” Cem. Concr. Compos. 72 (Sep): 180–189. https://doi.org/10.1016/j.cemconcomp.2016.06.016.
Kooshafar, M. 2017. “The investigation on the influence of silica nanoparticles with different morphologies on the properties of cement based materials.” M.Sc. thesis, Dept. of Structural Engineering, Civil Engineering Faculty, Graduate Univ. of Advanced Technology.
Kooshafar, M., and H. Madani. 2016. “Predicting properties of high performance concrete containing composite cementitious materials using artificial neural networks.” Concr. Mater. Struct. 22 (Mar): 516–524. https://doi.org/10.1016/j.autcon.2011.11.011.
Korpa, A., T. Kowald, and R. Trettin. 2008. “Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-silica.” Cem. Concr. Res. 72 (Sep): 180–189. https://doi.org/10.1016/j.cemconcomp.2016.06.016.
Madani, H. 2012. “The investigation on the effect of type and size of nano-silica on the strength and durability of concrete and cement based materials.” Ph.D. dissertation, Dept. of Structural Engineering, Civil Engineering Faculty, K. N. Toosi Univ. of Technology.
Madani, H., A. Bagheri, and T. Parhizkar. 2012a. “A comparison between the pozzolanic reactivity of nanosilica sols and pyrogenic nanosilicas.” In Proc., Hipermat 2012 Int. Symp. on UHPC and Nanotechnology for High Performance Construction Materials, 125–131. Kassel, Germany: Kassel University Press GmbH.
Madani, H., A. Bagheri, and T. Parhizkar. 2012b. “The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of portland cement.” Cem. Concr. Res. 42 (12): 1563–1570. https://doi.org/10.1016/j.cemconres.2012.09.004.
Madani, H., A. Bagheri, T. Parhizkar, and A. Raisghasemi. 2014. “Chloride penetration and electrical resistivity of concretes containing nanosilica hydrosols with different specific surface areas.” Cem. Concr. Compos. 53 (Oct): 18–24. https://doi.org/10.1016/j.cemconcomp.2014.06.006.
Madani, S., and M. Kooshafar. 2017. “Influential mechanisms and potential applications of nano-silicas in cement composites.” Civ. Eng. Infrastruct. J. 50 (2): 375–393. https://doi.org/10.7508/CEIJ.2017.02.010.
Mehmannavaz, T., V. Khalilikhorram, S. M. Sajjadi, and M. Samadi. 2014. “Presenting an appropriate neural network for optimal mix design of roller compacted concrete dams.” Res. J. Appl. Sci. Eng. Technol. 7 (9): 1872–1877. https://doi.org/10.19026/rjaset.7.475.
Mohebbi, A., M. Shekarchi, M. Mahoutian, and S. Mohebbi. 2011. “Modeling the effects of additives on rheological properties of fresh self-consolidating cement paste using artificial neural network.” Comput. Concr. 8 (3): 279–292. https://doi.org/10.12989/cac.2011.8.3.279.
Mondal, P., S. P. Shah, L. D. Marks, and J. J. Gaitero. 2010. “The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of portland cement.” Transp. Res. Rec. 42 (12): 1563–1570. https://doi.org/10.1016/j.cemconres.2012.09.004.
Najigivi, A., A. Khaloo, and S. A. Rashid. 2013. “Chloride penetration and electrical resistivity of concretes containing nanosilica hydrosols with different specific surface areas.” Int. J. Concr. Struct. Mater. 53 (Oct): 18–24. https://doi.org/10.1016/j.cemconcomp.2014.06.006.
Nazari, A., and S. Riahi. 2011. “The effects of nanoparticles on physical and mechanical properties of high strength compacting concrete.” Composites Part B 42 (3): 570–578. https://doi.org/10.1016/j.compositesb.2010.09.025.
Özcan, F., C. D. Atiş, O. Karahan, E. Uncuoğlu, and H. Tanyildizi. 2009. “Presenting an appropriate neural network for optimal mix design of roller compacted concrete dams.” Adv. Eng. Software 7 (9): 1872–1877. https://doi.org/10.19026/rjaset.7.475.
Porro, A., J. Dolado, I. Campillo, E. Erkizia, Y. De Miguel, Y. S. de Ibarra, and A. Ayuela. 2005. “Effects of nanosilica additions on cement pastes.” In Proc., Applications of Nanotechnology in Concrete Design, 87–96. London: Thomas Telford.
Ramezanianpour, A., M. Sobhani, and J. Sobhani. 2004. “Modeling the effects of additives on rheological properties of fresh self-consolidating cement paste using artificial neural network.” Amirkabir 8 (3): 279–292. https://doi.org/10.12989/cac.2011.8.3.279.
Rupasinghe, M., R. San Nicolas, P. Mendis, M. Sofi, and T. Ngo. 2017. “Investigation of strength and hydration characteristics in nano-silica incorporated cement paste.” Cem. Concr. Compos. 80 (Jul): 17–30. https://doi.org/10.1016/j.cemconcomp.2017.02.011.
Sadrmomtazi, A., J. Sobhani, and M. Mirgozar. 2013. “Modeling compressive strength of EPS lightweight concrete using regression, neural network and ANFIS.” Constr. Build. Mater. 42 (May): 205–216. https://doi.org/10.1016/j.conbuildmat.2013.01.016.
Sanchez, F., and K. Sobolev. 2010. “Nanotechnology in concrete—A review.” Constr. Build. Mater. 24 (11): 2060–2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014.
Sarıdemir, M. 2009. “Predicting the compressive strength of mortars containing metakaolin by artificial neural networks and fuzzy logic.” Adv. Eng. Software 40 (9): 920–927. https://doi.org/10.1016/j.advengsoft.2008.12.008.
Shih, J.-Y., T.-P. Chang, and T.-C. Hsiao. 2006. “Effect of nanosilica on characterization of portland cement composite.” Mater. Sci. Eng., A 424 (1–2): 266–274. https://doi.org/10.1016/j.msea.2006.03.010.
Siddique, R., P. Aggarwal, and Y. Aggarwal. 2011. “Prediction of compressive strength of self-compacting concrete containing bottom ash using artificial neural networks.” Adv. Eng. Software 42 (10): 780–786. https://doi.org/10.1016/j.advengsoft.2011.05.016.
Sobhani, J., M. Najimi, A. R. Pourkhorshidi, and T. Parhizkar. 2010. “Prediction of the compressive strength of no-slump concrete: A comparative study of regression, neural network and ANFIS models.” Constr. Build. Mater. 24 (5): 709–718. https://doi.org/10.1016/j.conbuildmat.2009.10.037.
Tabatabaei, R., H. R. Sanjaria, and M. Shamsadini. 2014. “The use of artificial neural networks in predicting ASR of concrete containing nano-silica.” Comput. Concr. 13 (6): 739–748. https://doi.org/10.12989/cac.2014.13.6.739.
Tavakoli, H. R., O. L. Omran, M. F. Shiade, and S. S. Kutanaei. 2014. “Prediction of combined effects of fibers and nanosilica on the mechanical properties of self-compacting concrete using artificial neural network.” Latin Am. J. Solids Struct. 11 (11): 1906–1923. https://doi.org/10.1590/S1679-78252014001100002.
Thuadaij, N., and A. Nuntiya. 2008. “Synthesis and characterization of nanosilica from rice husk ash prepared by precipitation method.” J. Nat. Sci. Special Issue Nanotechnol. 7 (1): 59–65.
Yeh, I.-C. 1998. “Modeling of strength of high-performance concrete using artificial neural networks.” Cem. Concr. Res. 28 (12): 1797–1808. https://doi.org/10.1016/S0008-8846(98)00165-3.
Yu, R., P. Spiesz, and H. Brouwers. 2014. “Effect of nano-silica on the hydration and microstructure development of ultra-high performance concrete (UHPC) with a low binder amount.” Constr. Build. Mater. 65 (Aug): 140–150. https://doi.org/10.1016/j.conbuildmat.2014.04.063.
Zadeh, L. A. 1965. “Fuzzy sets.” Inf. Control 8 (3): 338–353.
Zapata, L. E., G. Portela, O. M. Suárez, and O. Carrasquillo. 2013. “Rheological performance and compressive strength of superplasticized cementitious mixtures with additions.” Constr. Build. Mater. 41 (Apr): 708–716. https://doi.org/10.1016/j.conbuildmat.2012.12.025.
Zyganitidis, I., M. Stefanidou, N. Kalfagiannis, and S. Logothetidis. 2011. “Nanomechanical characterization of cement-based pastes enriched with nanoparticles.” Mater. Sci. Eng., B 176 (19): 1580–1584. https://doi.org/10.1016/j.mseb.2011.05.005.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Oct 19, 2019
Accepted: Feb 24, 2020
Published online: Jun 4, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.