Parametric Study and Design Procedure for Skewed Extended Shear-Tab Connections
Publication: Practice Periodical on Structural Design and Construction
Volume 22, Issue 3
Abstract
Previous studies by the authors discussed the behavior of unstiffened and stiffened extended shear-tab connections, highlighted the differences between both types, and discussed the applicability of stabilizer plate requirements to skewed extended shear-tab connections. This study presents a parametric study and proposes a design procedure for skewed extended shear-tab connections based on results obtained from a finite-element analysis for 300 models with different configurations. The variable parameters used for this study are plate thickness, the distance between the weld line and the bolt line, the skewed angle, and the number of bolts. These parameters were investigated in terms of the connection’s vertical displacement, the plate twist along the bolt line, the plate twist along the weld line, and the connection shear capacity. Modifications to the current connection lateral stability checks in the literature will also be addressed. The proposed design procedure on this study is the specific procedure for the skewed extended shear-tab connections. This procedure is compared with the current design procedure in the AISC manual.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abaqus. [Computer software]. Dassault Systèmes, Waltham, MA.
Abolitz, A. L., and Warner, M. E. (1965). “Bending under seated connections.” Eng. J., 2, 1–5.
Abou-zidan, A., and Liu, Y. (2015). “Numerical study of unstiffened extended shear tab connections.” J. Constr. Steel Res., 107, 70–80.
AISC. (2005). Steel construction manual, 13th Ed., Chicago.
AISC. (2010). Steel construction manual, 14th Ed., Chicago.
Al Hijaj, M., and Mahamid, M. (2015). “Behavior of skewed extended shear tab connections.” 2015 ASCE/SEI Structures Congress, ASCE, Reston, VA.
ANSYS 7.0 [Computer software]. ANSYS, Canonsburg, PA.
ASCE. (2010). “Minimum design loads for buildings and other structures.” Standard ASCE/SEI 7-10, Reston, VA.
Butler, L., Pal, S., and Kulak, G. (1972). “Eccentrically loaded welded connections.” J. Struct. Div., ASCE, 98(5), 989–1005.
Cheng, J. J., Yura, J. A., and Johnson, C. P. (1984). “Design and behavior of coped beams.” PMFSEL Rep. No. 84-1 for the American Institute of Steel Construction, Univ. of Texas at Austin, Austin, TX.
Kloiber, L., and Thornton, W. (2001). “Design of skewed connections.” Eng. J., AISC, 38(3), 140–147.
Mahamid, M., and Al Hijaj, M. (2016). “Behavior of stiffened skewed extended shear tab connections.” Geotechnical and Structural Engineering Congress Conf., ASCE, Reston, VA.
Mahamid, M., Rahman, A., and Ghorbanpoor, A. (2007). “The analyses of extended shear tab steel connections Part II: The stiffened connections.” Eng. J., AISC, 44(2), 133–145.
Rahman, A., Mahamid, M., Amro, A., and Ghorbanpoor, A. (2007). “The analyses of extended shear tab steel connections Part I: The unstiffened connections.” Eng. J., AISC, 44(2), 117–132.
Thornton, W. A., and Fortney, P. J. (2011). “On the need for stiffeners for and the effect of lap eccentricity on extended shear tabs.” Eng. J., AISC, 48(2), 117–125.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jul 11, 2016
Accepted: Nov 14, 2016
Published online: Mar 15, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 15, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.